Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
General Discussion (Model Railroader)
»
Baldwin Sharks
Edit post
Edit your reply below.
Post Body
Enter your post below.
The AT&SF never had any Sharks, but it seems that most every model train maker used to feel compelled to do most any diesel in Santa Fe's beautiful 'war-bonnet' scheme. <br /> <br />Only a handful of northeastern RRs used Sharks during their relatively short production cycle (NYC, PRR, Monongahela RR (ex-NYC units ?), B&O, and eventually, the D&H (former NYC & Monongahela locos, which may be in Mexico now ?). The D&H's 'warbonnet' paint scheme was highly influenced by the Alco PAs they also purchased 2nd hand around the same time from the Santa Fe (that had been painted in the Santa Fe's red & yellow 'warbonnet' scheme; the D&H just repainted the red in their signature D&H blue). Even way back when the D&H acquired both the Sharks and the PAs, railfans went nuts over it. <br /> <br />Automotive brake fluid will remove the original Model Power paint. <br /> <br />I have been gathering up a sizeable fleet of these engines (made for Model Power by Roco in Austria) and they are good haulers, after a proper cleaning and oiling as someone else already mentioned. What detail is there is well done, and there are some aftermarket parts to add more - esp. if one is modeling PRR engines. (check out Bowser for detail parts) The only real compromise I can see is the trucks are a tad short, for Model Power also used the same Roco chassis for their Alco FAs. The style of trucks for both the Sharks and the FAs are nearly identical. There are Kadees available for these engines as well - believe that #5s will work fine. <br /> <br />The Roco drive is somewhat noisy, but so were the prototypes - consider it a 'low-buck sound system', and I do not find it objectionable at all. If anyone can make a recommendation on 'how to convert those Roco drives to DCC, it would be very appreciated. . . <br /> <br />One should not mu these Baldwins with diesels from other makers (EMD, Alco, GE, FM, etc.) for the Sharks were unable to mu with them due to an incompatible mu setup (believe that the Sharks used a hydraulic type of setup - someone correct me if I'm wrong) That was perhaps the downfall for Baldwin, and they exited the diesel marketplace not too long after the last Shark left their factory. The PRR had the largest fleet of Sharks. These engines were terrific drag engines, and spent most of their time in ABA and ABBA configurations hauling long strings of coal out of the eastern coal fields. Some did passenger duty on short PRR branch lines, and only the PRR purchased the gorgeous RF20s for longer passenger only runs. <br /> <br />Raymond Lowey's studio styled the Shark's exterior - not him personally, for he was the 'light your cigar' and 'pour your brandy' boardroom man for his successful industrial design firm. That Lowey is rumored to have signed the original skectches and drawings of his unsung stylists and designers, and that many of these drawings were obviously done in multiple techniques by more than one person, is proof that he may have approved the designs, but didn't actually pen them, even though this engine and many other products were referred to as 'Lowey' designs (Studebakers, appliances, and of course, locomotives and passenger equipment). btw - his studio's first design contract when he was located in France, was for designing French brassieres! The styling similarities between the Sharks and some PRR streamlined steam can be easily seen, and is evidence of Lowey's design contracts with the PRR. At least he can be credited with hiring talented designers. . . <br /> <br />Now I just need to find a way to rationalize how my sizeable Shark roster found its way to a free-lanced bridge route across north GA and southwestern NC ! I'm wide open to someone's creative thoughts on that ! <br />- Bill
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag
Update Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up