Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
General Discussion (Model Railroader)
»
Loco Wheel cleaing
Loco Wheel cleaing
1305 views
7 replies
Order Ascending
Order Descending
Anonymous
Member since
April 2003
305,205 posts
Loco Wheel cleaing
Posted by
Anonymous
on Thursday, February 6, 2003 9:46 PM
Does anyone have any hints, tips or tricks to clean the wheels on my "N" scale locomotive. Rather new to the hobby and just bought a used LifeLike GP38 that has rather dirty wheels and doesn't seem to perform as it should.
any help is greatly appreciated!!!!
Thanks in advance!
Reply
Edit
dknelson
Member since
March 2002
From: Milwaukee WI (Fox Point)
11,439 posts
Posted by
dknelson
on Friday, February 7, 2003 8:14 AM
build a section of test track, perhaps a foot or foot and a half long on a piece of plywood. Hook up power. Get some paper towels and soak an area a little wider than the track in a commercial track cleaning product. Run the engine so that it more or less coasts over the paper towel, or hold the engine so that one truck is over the track and the other is over the dampened paper. I think you will find that dark gunk gets deposited on the paper. Then do the other truck in the same way. Rotate the paper towel so you aren't redepositing dirt on the other wheels. I think you'll find this works reasonably well. BUT ... if the problem persists then you really need to address the root cause which is dirty track, and that in turn might mean a bigger project of dirt-proofing your train room.
Dave Nelson
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, February 7, 2003 3:00 PM
Try this site for additional hints.
http://www.ttx-dcc/technews_machine.htm
That's an underscore line_between technews_machine
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, February 7, 2003 4:41 PM
Thanks for your help Dave
I'll give it a try and see how it works!!!
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Friday, February 7, 2003 4:42 PM
Thanks for the link!! I'll check it out!
Thanks again!!!
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Saturday, February 8, 2003 7:05 AM
Good method, Dave, I use this one too. I added one 'feature' as well, on the area I use for the paper towel, I cut about a dozen sharp edged shallow grooves right across the track, about every 1/16", which gives a little 'tooth' to the process.I use this without the towel first, to "machine off" the worst of the gunk, dry.
To cut these grooves, one could use a razor saw if they don't have a Dremel.
regards / Mike
Reply
Edit
Martin4
Member since
December 2001
From: Quebec City, CA
262 posts
Posted by
Martin4
on Sunday, February 9, 2003 7:30 AM
Hi
I tried to connect to the addres you gave (http://www.ttx-dcc/technews_machine.htm )
about wheel cleaning but it didn't work. Could there be something missing in the string of characters ?
Martin
Reply
dknelson
Member since
March 2002
From: Milwaukee WI (Fox Point)
11,439 posts
Posted by
dknelson
on Monday, February 10, 2003 8:06 AM
Good idea Mike
Some people use handi wipes (Fabric) rather than paper towel for the greater "tooth."
Of course cleaning loco wheels is just one part of the process -- what is making them dirty? That opens up bigger topics
Dave Nelson
Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up