LokSound Select - Prime Mover Start Up at Power Start Up

[maxman]

Rich:

 

See FAQ for LokSound select decoders, "how do I reverse F8":

http://www.esu.eu/en/support/faq/loksound/loksound-select/

 

 

[richhotrain]

Yesterday evening, I had it with sound. Too many locos sounding uo at power up.

So, I began my quest for silence by counting how many sound equipped locos are on my layout. Turns out, I have 28 sound equipped locos, but only 6 start up the sound of the prime mover immediately upon power up.

The 22 that remain silent are all QSI, BLI Paragon 2, and BLI Blueline.

Of the remaining 6, 5 are Tsunamis. The solution for the Tsunami is pretty simple - - - CV 113 =1.

But the remaining sound decoder, a LokSound Select is driving me nuts. I have read through the manual and tried different changes to CVs but to no avail. This LokSound Select decoder is in an Intermountain F3 for whatever difference that makes.

So, my question is, how do I program the LokSound Select decoder so that it remains silent at power up?

Thanks in advance.

Rich