Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

slow speed

1403 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2013
  • 8 posts
slow speed
Posted by john d on Wednesday, July 15, 2015 11:43 PM

Intermountain ES44DC/ Soundtraxx Decoder with Digitrax Super Chief

Any good numbers to set CV 10 , CV 209 , CV 210 , and CV 212 at for slow speed 

  • Member since
    January 2010
  • 2,616 posts
Posted by peahrens on Thursday, July 16, 2015 8:44 AM

This procedure for Tsunami may be applicable:

http://www.trainweb.org/gnw/BEMF%20Tuning.htm

Found it with google search "site: cs.trains adjust bemf". the resulting list:

https://www.google.com/search?sourceid=chrome-psyapi2&ion=1&espv=2&ie=UTF-8&q=site%3A%20cs.trains%20adjust%20bemf&oq=site%3A%20cs.trains%20adjust%20bemf&aqs=chrome..69i57j69i58.15740j0j7

EDIT: here's another on Tsunami adjustment (added "how to" to search:

http://www.modelrailroadforums.com/forum/archive/index.php/t-21678.html

 

 

 

Paul

Modeling HO with a transition era UP bent

  • Member since
    September 2003
  • 10,582 posts
Posted by mlehman on Thursday, July 16, 2015 10:44 AM

peahrens
EDIT: here's another on Tsunami adjustment (added "how to" to search: http://www.modelrailroadforums.com/forum/archive/index.php/t-21678.html

This last one is one that I think is oriented toward steam users. I don't have any diesel Tsunamis, so can't say whether it works the same or not with them.

The first two links to diesel Tsunami adjustments are likely a better choice for them. There are several ways to do this with steam ones, so if one doesn't work for you with diesel Tsunamis, try another.

Mike Lehman

Urbana, IL

  • Member since
    January 2010
  • 2,616 posts
Posted by peahrens on Thursday, July 16, 2015 3:39 PM

I remembered that I have some printouts in a file so looked there for more info related to Tsunami BEMF adjustment.  I haven't digested it all but suggest you look through these also, for background as well as different procedures.  Then maybe try a preferred method, then maybe an alternate that sounds interesting.  I've not fooled with my Tsunamis lately, as I've mostly been converting new DC acquisitions to ESU LokSound DCC.  I need to look into those myself.  Anyway, i hope these additions are helpful.  We'd love to hear about what results you observe. 

Here's where to get the Tsunami Diesel Sound Users Guide.  Check out what they say (pg 48) about Advanced Programming / "Hyperdrive" adjustments.

http://www.soundtraxx.com/manuals.php

Here's a page on Mark Gurries site specific to Soundtraxx adjustment:

https://sites.google.com/site/markgurries/home/decoders/decoder-motor-tuning/soundtraxx

And here's Mr DCCs University page on Tsunamis, including a paragraph on Getting My Loco to Run Well Slowly:

http://mrdccu.com/curriculum/soundtraxx/tsunami.html

Maybe more than you ever wanted to know...hope it all helps...good luck.

Paul

Modeling HO with a transition era UP bent

  • Member since
    January 2013
  • 8 posts
Posted by john d on Friday, July 17, 2015 1:38 AM

Thank you for the prompt reply.

All the links that you sent to me i've seen befor.I guess what i'm trying to get help with is i've followed all of the instructions to the letter.did a reset to default and turned off all cv that were not at zero after reset as per instructions , and started with cv209 and set it in increments all the way to 255 with no movement ,  with throttle set at ss1 ,  then by mistake I used cv210 and when i entered 10 into cv210 I got movement with cv209 at zero , after it was moving i fiddled with cv210 and cv209 but it wasn't any slower than default settings all the instruction that i've read say start with cv 209 but this didn't work .What gives ? Right now I've got all the default numbers back except fo cv10 which is at 126 , don't ask I don't know.all i'm wanting is some numbers that will slow the loco down at ss1.it works well , sounds good all i want is slower speed in ss1 with a smoth start and stop.

Thank you.

John Dorrell.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!