Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

changing dh164 to diesel sound ?

1021 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2008
  • From: high desert so cal
  • 997 posts
changing dh164 to diesel sound ?
Posted by BIG JERR on Thursday, July 14, 2011 8:41 AM

installed a DH164 in a p2k gp7 and for the life of me cant figure out how to change the sound to diesel ? CV60 is the cv but cant find the value I need . PLEASE I read the manual (pamphlet) but I'm not finding it (the value) ?

first impressions is OK for cheap price and in a helper next to a better sound unit (qsi or tsunami). for a speaker incloser I used the bottom of a HD cut off disk container (dremil) ,perfect fit for the stock speaker . but had to do some milling on the weight(not fun) and I lost my engineer and conductor . a different speaker may work better ,but I'm trying to keep cost down.

also any advise for fine tuning on the pr-3 would be great . thanks Jerry

PS; what to do with all the extra wires coming out of this decoder?,thinking of cutting them back to there plug fo neatness ,if youv not seen th DH164 you mite not under stand this but its got wires hanging out both ends

  • Member since
    February 2008
  • 8,849 posts
Posted by maxman on Thursday, July 14, 2011 9:00 AM

BIG JERR

installed a DH164 in a p2k gp7 and for the life of me cant figure out how to change the sound to diesel ? CV60 is the cv but cant find the value I need . PLEASE I read the manual (pamphlet) but I'm not finding it (the value) ?

I believe that CV 60 = 1 gives you the default diesel sound.  See page 4 (paragraph 9) of: http://www.digitrax.com/ftp/SDH164D.pdf 

  • Member since
    October 2008
  • From: high desert so cal
  • 997 posts
Posted by BIG JERR on Thursday, July 14, 2011 9:19 AM

Thank you maxman,how could I have missed that Tongue Tied Im going out to the train room and check my manual ,thanks again...Jerry

  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Thursday, July 14, 2011 12:08 PM

0=steam, 1 = diesel, but be careful if you replace the default sound swith any of the others you can download. You may have to reset CV60 to make it work.

              --Randy


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    October 2008
  • From: high desert so cal
  • 997 posts
Posted by BIG JERR on Thursday, July 14, 2011 9:44 PM

thanks Randy;good info and I was thinkin of a download but after getting it dialed in with the defalt diesel(gp38 I think)      I AM IMPRESSED nice clear sound ,and thats with the shell off.gosh for the money it way better than I expected ,and theres a cv to raise the vollume but its plenty load @a tad over half...

oh I did set the cv57 to0 so it stop slow down thing when horn blew.just need to speed match to my qsi p2k gp fleet and put the shell on .if it holds up I may be getting quite a few more of these....Jerry

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!