anybody know of any videos or instructions on how to install DCC onto a Broadway Limited HO DC engine?
As I said before, “exactly which engine”? Steam or diesel? There will be differences. Sound or non sound? Many times this question will pop up after.
TCS has a few installs for some non sound BLI. Only one for sound.
http://www.tcsdcc.com/
Question that begs asking. How much DCC experince do you have? Can make a difference.
SoundTraxx has some for BLI but all sound. They do sell a good non sound decoder.
Rich
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.
Which engine? It must be an early run Precision Craft Models "DCC Ready" engine unless you are referring to a "Blue-Line" series which has sound but no motor decoder?
Again, which engine (do you have the PCM or BLI model number?) and what decoder do you want to use? Sound?
Nearly (all?) of the Broadway/PCM engines were designed for sound.
Need... More... Input...
Ed
Sorry, I am very new to DCC so I do not know what info is essential. All I know is that its a LS&I RSD-15 diesel. It did not come with a box so I don't have anymore info
I did a PCM made by BLI some years ago. Needed hard wiring using a SoundTraxx lightboard type decoder for a F7 A/B set.
Steamers get the decoder and speaker in the tender though a few put sugar cube speakers in the smoke box where the sound really comes from, out the stack.
Some point the speaker up though the fan housings on diesels instead of firing down though the trucks like my F3 and F7.
Some like marker lights.
A basic non sound decoder will only need seven wires. More wires for other options.
Is yours DCC ready? If needed, get a Photo Bucket accound and post pictures here. It can make things much clearer.
I heard of some people having issues with TSC burning out or melting some plastic on their engines. I will probably stay clear of them. I have a Digitrax Zephyr controller that I just picked up, prob stick with that brand.
UPNorth906 Sorry, I am very new to DCC so I do not know what info is essential. All I know is that its a LS&I RSD-15 diesel. It did not come with a box so I don't have anymore info
Please take time to look through the TCS link I provided a short time ago. Your loco is there and it looks like plug and play. Store the TCS link in Favorites. When someone post ;links for you, look through them and store the links.
Open up your model and see it it looks the same. You are going to have to open it up anyway.
What is the number on the loco?
Alton Junction
This one?
http://www.broadway-limited.com/bli-2430alcorsd-15lsandi2404maroonschemelownoseparagon2sounddcdccho-1.aspx
Is there something wrong with the decoder/sound already installed in it?
You may only need to reset the decoder if it is not functioning. Although there could be other problems.
Have you tried to run the engine on DC power?
Good Luck, Ed
This is you loco. I suspect from a private sale if no box. This is suppose to be the easiest
http://www.tcsdcc.com/Customer_Content/Installation_Pictures/HO_Scale/Broadway_Limited/RSD_15/RSD%2015.html
If new to DCC, DCC ready seems to be the motor contacts isolated from the pickups. DC locos the contacts connect right to the two motor leads.
For connections, could be a 8 pin NMRA socket, a JST 9 pin socket or a PC board with contacts to solder the decoder wires like a couple small HO Bachmann diesels I have.
Decoders come in many different styles.
its 2402, red paint sheme
UPNorth906 its 2402, red paint sheme
The color scheme and number should make no difference. Open it up and compare to the link I provided. As I said, you are going to have to open it up anyway.
I have yet to see any links in DCC forums about the TCS decoders running too hot. A decoder running to hot would be because a motor that requires more current than the decoder is made for, i.e. incorrect install.
Ed was close. It is a Paragon.
We have to assume you have run this loco with a DC power pack as you said it is DC loco. How does it run?
UPNorth906 I heard of some people having issues with TSC burning out or melting some plastic on their engines.
I heard of some people having issues with TSC burning out or melting some plastic on their engines.
Some people???...or one guy on this forum???
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
UPNorth906 I heard of some people having issues with TSC burning out or melting some plastic on their engines. I will probably stay clear of them. I have a Digitrax Zephyr controller that I just picked up, prob stick with that brand.
http://cs.trains.com/mrr/f/88/p/116841/1336673.aspx
richhotrain UPNorth906 I heard of some people having issues with TSC burning out or melting some plastic on their engines. I will probably stay clear of them. I have a Digitrax Zephyr controller that I just picked up, prob stick with that brand. In this old thread, David Bedard recommended the Digitrax DZ123PS decoder for the BLI RSD-15. http://cs.trains.com/mrr/f/88/p/116841/1336673.aspx Rich
In this old thread, David Bedard recommended the Digitrax DZ123PS decoder for the BLI RSD-15.
Here the link is active.
I have used the DZ125PS and is quite small and works very well also. Cheap enough. I believe it has been superseded.
Too Rich in here for my blood...