Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Peco switches using Tortoises

2053 views
3 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Peco switches using Tortoises
Posted by Anonymous on Friday, November 21, 2003 8:54 PM
Has any one used a tortoise switch machine to control a HO Peco switch. I used a stronger control rod then comes packaged with the tortioise machine, but it still didn't work. I did some testing and found that using a tortoise with a modified Rix under the table switch control worked well, but you have to lenghten the pivot arm of the Rix to match the tortoise's throw. I'll do this to all 11 if I have to, but is there a easier way.

George
  • Member since
    January 2001
  • From: Guelph, Ont.
  • 1,476 posts
Posted by BR60103 on Friday, November 21, 2003 10:44 PM
I have two Peco switches using Tortoise machines and a number using Rix mounts.
The trick is to remove the spring that holds the points over.
Just beyond the points there is a little plastic dohickey that holds one end of the spring -- the other is in the tiebar, just by the operating hole. The dohickey is held down by two metal tabs. Use a fine screwdriver to pry up the tabs slightly and slide the dohickey away from the tiebar a bit. This will lighten the spring pressure. You can also remove the spring entirely -- watch out as it's small.
This operation may be required on any Peco turnouts that are operated by a springy wire; just make sure that the switch machine is the type that holds the points over.

--David

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, November 22, 2003 6:37 AM
Thanks so much David. I'll give it a try.

George
  • Member since
    March 2002
  • 17 posts
removing the spring woks great
Posted by buckeyestation on Saturday, November 22, 2003 11:16 AM
QUOTE: Originally posted by swal46

Thanks so much David. I'll give it a try.

George
Dry Ridge, Ky.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!