Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

WS plaster cloth VS. SE plaster wrap

2244 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2012
  • 81 posts
WS plaster cloth VS. SE plaster wrap
Posted by cncsxbnsfrailway2 on Tuesday, November 27, 2012 5:25 PM

I've noticed that the scenic express plaster wrap is a bit cheaper than wooodland scenics plaster cloth.  I'm thinking I'll maybe buy a roll or 2 of SE plaster wrap.  I have a couple of questions on the SE stuff in compassion to WS.

A) How long does it take to dry?

B) Does it get as hard as the WS stuff?

C) Is there anything else I should know?

  • Member since
    January 2001
  • From: SE Minnesota
  • 6,847 posts
Posted by jrbernier on Tuesday, November 27, 2012 5:50 PM

  I have used both - Very similar.  The drying time is about 30 minutes for both.  Most of the plaster cloth I have used is from medical supply houses.  They have 'seconds' that did not wrap on the spindle correctly or have other imperfections.  Places like ASW Express or Ortho Tape can be found on the Internet.  
Also, Hobby Lobby has 3" and 6" wide rolls that you can purchase with their 40% off coupons.  IIRC, even eBay has deals on the stuff. 

Jim

Modeling BNSF  and Milwaukee Road in SW Wisconsin

  • Member since
    June 2012
  • 81 posts
Posted by cncsxbnsfrailway2 on Tuesday, November 27, 2012 6:04 PM

jrbernier
The drying time is about 30 minutes for both

I would beg to differ because I used WS plaster cloth once and it took 20 hours or so. 

  • Member since
    January 2001
  • From: SE Minnesota
  • 6,847 posts
Posted by jrbernier on Tuesday, November 27, 2012 7:12 PM

  20 Hours?  It should start setting up after 20 minutes.  It will get very warm as it cures, which can take a couple of hours at most.  I have seen plaster take several hours if one puts some vinegar in the mix - a pretty common way to get a 'delay'.  before it starts setting up.

  One other possibility is that the roll had been sitting around for some time and had soaked up the humidity in the house.  I have over 100 rolls of plaster wrap on my layout and our club layout - I have never run into what you are describing

Jim

Modeling BNSF  and Milwaukee Road in SW Wisconsin

  • Member since
    July 2004
  • From: Weymouth, Ma.
  • 5,199 posts
Posted by bogp40 on Wednesday, November 28, 2012 12:31 AM

I agree, there had to be some serious issues w/ the plaster formula or it had been exposed to moisture. Even a bad batch should still dry, old plaster may cure improperly and crumble, but not seen anything take 20 hours. Even Drywall mud will be dry in that time.

Modeling B&O- Chessie  Bob K.  www.ssmrc.org

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!