Trains.com

basement layout

814 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2002
  • From: US
  • 15 posts
basement layout
Posted by Reddahc on Sunday, March 26, 2006 12:49 PM
Any thoughts regarding the distance a layout should be from the foundation wall? I'm using multiple 4x8' tables bolted together in an L shape. I don't want to go against the walls tight so I can move about the layout. Doing it this way for future house move.
Thanks to all.
Charlie
Wenham, Mass.
  • Member since
    December 2004
  • 3,176 posts
Posted by csxt30 on Sunday, March 26, 2006 1:08 PM
[#welcome] Charlie to the forum !! I would think if you don't want your layout tight against the wall, then you may want to leave a comfortable amount of space to walk back there & to get up & out from underneath the layout when working under it back there. I would think at least 2 feet would be enough, & maybe less. Hope this helps !
Thanks,
  • Member since
    March 2004
  • 1,774 posts
Posted by Dr. John on Sunday, March 26, 2006 1:38 PM
Absolute minimum for access only - 18 inches.
Minimum for observation and operation - 24 inches
Better - 30 inches plus.
  • Member since
    December 2005
  • From: Long Island, NY
  • 456 posts
Posted by darianj on Sunday, March 26, 2006 2:37 PM
[#welcome]

I would go with at leat 2 feet also. If you have folding table or something similar, you might want to just test it out and see what's comfortable for you.
There's light at the end of the tunnel.... It's a Train! http://www.tmbmodeltrainclub.com
  • Member since
    July 2003
  • From: Watkinsville, GA
  • 2,214 posts
Posted by Roger Bielen on Sunday, March 26, 2006 5:27 PM
Welcome to the forum Charlie. The distance depends on how much girth the largest person expected to get back there has. Witha previous layout I had 22" but could barely move or slip down below the board.
Roger B.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, March 26, 2006 7:09 PM
You could use castors or wheels on the legs and move it out when needed.
  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Posted by Jumijo on Monday, March 27, 2006 6:55 AM
Welcome to the forum, Charlie. I'm also in Massachusetts.

My layout is roughly 15-18" from the wall. That lets me slide in back to clean track, vaccum, etc.

Jim

Modeling the Baltimore waterfront in HO scale

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, March 27, 2006 10:46 AM
The size of the distance from the wall to your layout is optional. I would say you make it 1 inch wider than your belly.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month