Trains.com

Putting Smoke Unit In Old Diesel's

2003 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Putting Smoke Unit In Old Diesel's
Posted by Anonymous on Monday, January 16, 2006 2:02 PM
I have a Lionel 2322 not the best condition but runs like a top along with my 2348 and 2338 but would like to put a smoke unit in them. My old steamers have the piston type that forces the smoke out . My question is there a unit out there for my diesels that would force out the smoke thru my roof hole.I repair my own , soldering etc. Also where could i buy the part and any idea of cost. Thanks for any info.
Martin
  • Member since
    January 2006
  • From: upstate NY
  • 110 posts
Posted by Locomotive681 on Monday, January 16, 2006 2:12 PM
You could get a new old stock=nos pistion unit from a steam locomotive on ebay or lionel even who knows with lionel in this new age of railsounds and such.[;)]
The route of the NYSW
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Monday, January 16, 2006 2:15 PM
I've had pretty good luck with installing Seuthe smoke units in diesels.

What I did was buy a small seuthe unit intended for use in an HO engine. I then drilled a hole of the aproximate diameter of the unit in a small square of brass sheet, and soldered the brass body of the smoke unit to the sheet of brass. I soldered a wire to the brass sheet to act as a ground wire, and then hot glued the whole assembly under the smoke hole.

Seuthe units have no moving parts; the heating element is wound around a glass tube that draws in the smoke fluid by capillary action and then blows it out with some force.

Seuthe units are around $20 each, and should be available at most well-stocked hobby shops. I think that I used the #8.
Ben TCA 09-63474
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, January 16, 2006 6:56 PM
TAS (Train America Studios) has one called turbo smoke, just for this purpose.

http://www.tastudios.com/index2.htm
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Monday, January 16, 2006 9:37 PM
You cn use any fan driven smoke unit if there is room. I am doing it to dummies. For cummies, I get the pickups from the manufacturer. Those already powered, it easier. Make a bracket [from L corner brackets so you can adjust height] and use track power. If you are running in command like I do, I use bridge rectifiers to reduce voltage to keep from burning up the unit. I use ACE wide closed foam insulation [one side sticky] for gasket between top of unit and shell.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    January 2014
  • 6 posts
Posted by WestCelt on Saturday, July 19, 2014 6:45 PM

Could you add a smoke to one of the newer Legacy Lionel Diesels that have everything except smoke?

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month