Also, found this, and what is interesting is that it includes 4 straight tracks and 9 curves, just like mine. Doesn't 8 curves make a traditional oval?
https://marketplace.trainzauctions.com/offer/details/5130971
This one also looks close, but has a raised spoke pilot, which mine doesn't have, so mine would be newer than this particular one?
https://ogrforum.ogaugerr.com/topic/marx-25000-12-boxed-set-999-with-raised-spoke-pilot
And this transformer has 4 taps as you said...mine has 2
https://www.ebay.com/itm/Marx-25000-12-Stream-Line-Steam-Type-Electrical-Train-Set-Box-/392173582383?nma=true&si=DdTjCMt%252FxYPEtuhgf7yBQ1cArwc%253D&orig_cvip=true&nordt=true&rt=nc&_trksid=p2047675.l2557
Almost exactly my set except for a different gondola
https://www.worthpoint.com/worthopedia/marx-25000-12-stream-line-electrical-1865375775
Not sure I beleive some of these car prices (3/4 of the way down the thread), considering what the entire set sells for.
http://cs.trains.com/ctt/f/95/t/44531.aspx
Thanks for your your GREAT information!
Papa-D:
Thanks! This is great info.!
I also found this online searching for that set # (see link below).
Its funny (and sad) that the Guide book is selling for more than the train itself.
https://www.liveauctioneers.com/item/29865671_marx-streamline-electric-train-set-2500012
After searching Greenberg’s Guide to Marx Trains- Sets, Vol 3, your set is most likely 25000-12.
Your transformer looks to be a 709 from ’50. You can confirm the transformer model number by the stamping on the bottom.
While not your set, a Sears set advertised in ’48 is similar. The transformer (729) that came with this set appears to have 4 taps. This transformer was first produced in ’40.
A best guess then is your set dates most likely from ’49 or ‘50. Enjoy!
Papa D
Thanks. Yes, getting the loco moving was a huge step forward and a relief. The cars and power supply seem to be a set based on the Sear catalogs. It also has an uncouple track but has no vertical piece to actually make it work and a power tap piece which isn't attached to a track, plus I believe some joiners (pins and black rectangles). There is some Lionel track in the box and also what I believe to be Marx track; 4 straights (including the uncouple piece) and 9 curves (strange number), so my guess it was an oval. Were 4 straights in a set common? Thx
All your pictures and posts are coming through now. Great set ! Really like the Marx tinplate cars that are about 3/16" scale. Got a few myself.
Glad your engine is running !
Paul
Papa_D:
Does this help? I think you can see the pic now.
For some reason, I can't post anything anymore (not even text), so I'm using a different browser and new session.
black 999 loco
black new york central tender
black gondola 71499 NKP NYC & Stl Nickel Plate Road
silver tanker Niacet Chemicals Corp NIAX 256? Niagara Falls, NY for glacial acetic acid
box yellow Pacific Fruit Express 35461
caboose red Reading 92812
It should turn fairly easily by hand, otherwise it may be binding, or gummed up.
I don't know how to quantify the free turning other than this :
when I put mine on the track and roll it by hand , the drivers turn with only very minimal sliding down the track. So, it should be relatively free rolling. Otherwise, the motor may not be able to overcome the binding.
tanker, silver , NIAX 256? Niagara Falls, for Glacial Acetic Acid
box car, silver, Pacific Fruit Express
caboose, red, Reading 92812
gondola, black, NYC & Stl Nickel Plate Road
tender, black, New Work Central
loco, black, 999 (no Marx logo)
Being able to find a free server to post the photos was one challenge, now the other is it seems nothing I post, gets posted at least in a timely manner (I understand there is moderator review timeframe).
I send the base url links to the pics.
http://i64.tinypic.com/r90ta8.jpg
http://i67.tinypic.com/2598hmb.jpg
http://i66.tinypic.com/2j47e3c.jpg
You’re having the same problem posting photos that many others also have. It might be easier for you to just give a verbal description of the cars that came with this engine, ie road name & number, number of wheels, and colors.
From the Sears catalogs, possibly a '46 or '47?
Thank you! The front shot you provided is the pilot I have (solid, no slots, rivets, no horizontal bars). Please see photo attached of the other cars.
Thank yhou in advance.
Thank you for the great information.--Last evening I tried to get the loco moving, but unfortunately, it would not move under its own power. All I got was some buzzing/humming from inside and some sparks at the rails. I can rotate the assembly by hand, although it seems harder than I would think it should be...like there is way too much mass to get moving (probably why the old tired motor can't do it). Maybe its binding internally or something although it doesn't 'grind' or anything.--Could this be an indication of bad brushes or seized bearings (if applicable)? or something?...or maybe just 60 years of 'gunk' and some rust?--I haven't had any time to do anything more to the loco, but am going to get some Goo-Gone and some 3-in-1 lightweight oil tonight.--Any other suggestions?
Despite her appearance, this one can still hold her own with the best of them
aboard!
Further to Papa D's post, check out this site that has Sears and other Christmas Wishbooks: http://www.wishbookweb.com/the-catalogs/
Trains, trains, wonderful trains. The more you get, the more you toot!
Papa
Neat information!!!!!
Jim
Relative to what year this set was produced, the below is background on the Marx 999 engine from a different thread. If you describe the cars (road name, number, color) that came with this set it might be possible to come up with a closer guess than late 40's or early 50's. While sets with a 999 engine generally don't command a lot of money (there are exceptions yours is not one of them), its real value is in its history.
The 999 was Marx’s first die-cast shell. It was produced in limited quantities in ’41 & ’42 and again after the war from ’46 to ‘54. The only pre-war 999 ad I’ve been able to find is from the Spiegel ’42 Christmas catalog. Note that shows an open cowcatcher.
After the war, the Sears ’46 Christmas catalog shows a 999 also with an open spoke cowcatcher.
The open spoke cowcatcher was reportedly easily broken. Since Marx’s philosophy was to made low cost but rugged toys, this design was quickly changed to a solid spoke cowcatcher and then probably to save a few pennies to a solid cowcatcher as shown in this Sears ’47 Christmas catalog ad.
The 999 last appeared in the Sears Christmas catalog in ’50.
Montgomery Ward’s last Christmas catalog ad for a 999 set appeared in ’54.
The Marx ’54 dealer catalog in GMTC also lists a 999 engine.
Recently on eBay there were 33 electric 999 being offered with the following cowcatcher types: 1 cut-off (aka broken), no open spoke, 1 closed spoke, and 31 plain (see photo). Marx sure sold a lot of 999 electric steam engines for them to be so plentiful over 60 years later.
TY!I'm curious if there is any way to narrow down the year of production. Using these pages as guides and understanding production started in '50 or '51, but I have a post-war, flush rivet, no logo version, maybe the closest I'll ever get is '46-'53?http://marxtinplatetrains.com/marx_guide_locos.htmhttps://www.modeltrainforum.com/showthread.php?t=25843
Either one will work. The red handle is a 50 watts Marx, the other a 35 watts Lionel.
Rob
I actually found 2 transformers in a box with HO stuff. One might be a Marx (its labelled 7-15 volts, but only seems to put out 12.5 max) and the other is a Lionel which puts out about the same. The engine seems to be postwar based on the center pickup.
Marx trains like the 999 are very robust. Many of the Marx I've repaired only needed cleaning and a lube. Good luck with your repair.
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month