Trains.com

Best way to Clean and Shine Marx tinplate

9712 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2009
  • 114 posts
Best way to Clean and Shine Marx tinplate
Posted by hectorgonzales on Saturday, August 27, 2011 7:47 AM

I purchased a set of Marx passenger cars that need a cleaning and some spit and polish.What do you  use to clean the car and then shine it up so the dull red color will stand out?

Does anyone know exactly what year this particular model/design was made? I always see a range from 1934 to 1954, but that's a wide swing.

 

  • Member since
    March 2009
  • 492 posts
Posted by arkady on Saturday, August 27, 2011 2:35 PM

I'm not a Marx collector, but I have cleaned up several lithographed Lionel freight cars.  I used a good automotive liquid wax, applying it with Q-tips, a small area at a time.  It removed the grime and did not damage the paint.

 

 

  • Member since
    March 2009
  • 114 posts
Posted by hectorgonzales on Saturday, August 27, 2011 5:42 PM

Wouldn't wax cover the grime?

  • Member since
    September 2010
  • From: Parma Heights Ohio
  • 3,442 posts
Posted by Penny Trains on Saturday, August 27, 2011 5:59 PM

I use Ivory liquid hand soap, not dishwashing liquid, diluted with water in a spray bottle.  The spray action helps loosen the grime and makes it possible to use less abrasive scrubers.  Most often a soft cloth, sponge or soft toothbrush is all I need to clean most grime from both lithographed and painted tin or plastic parts.  But unless I'm trying to remove the paint that's as far as I go.  I like scratches and other defects.  They tell stories!  Smile, Wink & Grin

Becky

Trains, trains, wonderful trains.  The more you get, the more you toot!  Big Smile

  • Member since
    March 2009
  • 114 posts
Posted by hectorgonzales on Saturday, August 27, 2011 7:35 PM

Penny Trains

I use Ivory liquid hand soap, not dishwashing liquid, diluted with water in a spray bottle.  The spray action helps loosen the grime and makes it possible to use less abrasive scrubers.  Most often a soft cloth, sponge or soft toothbrush is all I need to clean most grime from both lithographed and painted tin or plastic parts.  But unless I'm trying to remove the paint that's as far as I go.  I like scratches and other defects.  They tell stories!  Smile, Wink & Grin

Becky

I agree. I'll just use some mild soap and then top it off with some automotive wax.

  • Member since
    March 2009
  • 492 posts
Posted by arkady on Saturday, August 27, 2011 9:34 PM

Wouldn't wax cover the grime?

If it were just wax, as in the kind of thing you put on linoleum, yes.  But notice that I said automotive wax, which contains cleaners.  That's how it gets the grime off your car as it polishes.

 


  • Member since
    September 2010
  • From: Parma Heights Ohio
  • 3,442 posts
Posted by Penny Trains on Saturday, August 27, 2011 9:53 PM

arkady

Wouldn't wax cover the grime?

If it were just wax, as in the kind of thing you put on linoleum, yes.  But notice that I said automotive wax, which contains cleaners.  That's how it gets the grime off your car as it polishes.

 


Good to know.  I'll give that a try too!

Becky

Trains, trains, wonderful trains.  The more you get, the more you toot!  Big Smile

  • Member since
    March 2009
  • 114 posts
Posted by hectorgonzales on Saturday, August 27, 2011 10:13 PM

Marx Commodore Vanderbilt cleaned and waxed with mothers polish.

Loco purchased at antique store $18

Tender purchased on ebay $20

5 passenger cars purchased on ebay $41

Total cost for Marx Vanderbilt trainset  $79   fun factor....priceless 

 

 

 

  • Member since
    February 2011
  • From: Warrington, Pa. 18976
  • 269 posts
Posted by Gray Cat on Sunday, October 2, 2011 8:23 PM

Mother's Mag Wheel polish when used gently can improve the look of many a painted item. I've used it to clean and polish all kinds of antique painted metal items I've restored including some trains. The nice thing about the Mother's Mag Wheel Polish is it's a light polish with some wax in it. After cleaning and polishing a lite buffing with a soft cloth will bring out the shine and leave a protective wax coating.

Always try it in a test area first to see how it reacts with your particular item.

Lover of all things Gilbert, truly a man ahead of his time.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month