Trains.com

Newton, KS Passenger Train Station on the former Santa Fe

5893 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2006
  • From: KS
  • 999 posts
Posted by SFbrkmn on Monday, November 19, 2018 1:30 PM

This is from an article I wrote in February 2016 edition of Great Plains Diapatcher

The Amtrak depot at Newton opened as the Santa Fe passenger depot in 1930. The eastern half of the building housed the Fred Harvey Company restaurant. for 50 years, an eating facility was maintained in the depot under three ownerships.

  The Harvey dining facility in Newton closed during 1957. At the time of closing, the only such other location operating along the Santa Fe was in the depot at Gallup, NM. Soon after Harvey closed the Newton diner, it reopened as Henning Coffee Shop.

  In 1963, Flint Hills cattle rancher and restaurant owner Zennie Leonida bought Henning out and rebranded the establishment as Leonida's Restaurant. Mr. Leonida also operated steakhouses at both Emporia and Hutchinson. The Newton location was known as Leonida's. This became the place to dine at in all of Newton. Opened 24 hours, a fine selection of meal choices were on hand including a Sunday lunch buffet.

During Newton High School years, this writer worked at Leonida's from June 1979 to August 1980. Dale Sump was manager. His faher, Roy, served as Missouri Pacific agent in town.

In 1980 the Santa Fe requested a rent lease payment increase. Mr.Leonida declined and closed his restaurant which ended a half century tradition of dining inside the Newton depot.

 

  • Member since
    December 2001
  • From: Denver / La Junta
  • 10,820 posts
Posted by mudchicken on Sunday, November 11, 2018 3:13 PM

It was the Division Headquarters for the Middle Division and for the "Kansas Division"  until 2004. Newton was a major hub on ATSF, every bit as inportant as Barstow still is. Until the early 1960's, there also was a General Manager's staff there until things got re-distributed.

Mudchicken Nothing is worth taking the risk of losing a life over. Come home tonight in the same condition that you left home this morning in. Safety begins with ME.... cinscocom-west
  • Member since
    September 2013
  • 6,199 posts
Posted by Miningman on Sunday, November 11, 2018 2:10 PM

Now that is impressive. What a beauty. 

  • Member since
    June 2009
  • From: Dallas, TX
  • 6,952 posts
Posted by CMStPnP on Sunday, November 11, 2018 1:50 PM

bedell
The Santa Fe depot in Colorado Springs looks very similar.  The building still stands but the tracks are gone.  It is office space now.

Yes that is English Manor style as well.   Well maybe they mixed it up on Depot design.    Looks like a nice balcony on the second floor.

https://upload.wikimedia.org/wikipedia/commons/thumb/1/17/Atchison%2C_Topeka_and_Santa_Fe_Passenger_Depot.jpg/2560px-Atchison%2C_Topeka_and_Santa_Fe_Passenger_Depot.jpg 

 

  • Member since
    June 2009
  • From: Dallas, TX
  • 6,952 posts
Posted by CMStPnP on Sunday, November 11, 2018 1:46 PM

PJS1
If you google "Santa Fe Station, Temple, Texas", you will see some architectural similarities in the properties.  The Temple Station was also the division headquarters for the Texas Division.  The division offices were located on the second floor.  

 
Newton, is decidedly English-Tudor inside and out (beamed cielings inside with English motif wainscotting and doors).    Temple, looks to be some type of Southwestern Pueblo hybrid with the red tile roof and stucco & brick.   So they are different architectures.   Some features might be the same.    
 
To me it seems out of place to suddenly decide on English Tudor and William Shakespear when most of the rail line was preferential to the Southwest - Indian motif.    It seems like kind of an outliar.   That's why I am curious if there is a story behind why they attempted that in Newton, KS.    There is probably a reason somewhere having to do with a railroad official that made the decision.
  • Member since
    January 2002
  • 229 posts
Posted by bedell on Sunday, November 11, 2018 12:28 PM

The Santa Fe depot in Colorado Springs looks very similar.  The building still stands but the tracks are gone.  It is office space now.

  • Member since
    September 2011
  • 6,449 posts
Posted by MidlandMike on Saturday, November 10, 2018 9:44 PM

CMStPnP
probably is a rail junction there. 

It's definatly an important junction.  It's historically where the southern (Transcon) line left the original main line (Raton Pass route).  There is a bypass line that leaves the mainline closer to Emporia, but the two lines to the south are predominantly directionally operated as a split double track segment of the Transcon. 

  • Member since
    February 2016
  • From: Texas
  • 1,552 posts
Posted by PJS1 on Saturday, November 10, 2018 4:20 PM

CMStPnP
 OK, so I kind of understand why this station in Kansas is so large as it is near Witchita, probably is a rail junction there.   Used to be a Hotel and Harvey Lunch Counter as well.     Where I get lost is why the Santa Fe built the station to look like William Shakesperes home..........what is the story behind that?

Amtrak picture of station in Newton, KS.

http://www.greatamericanstations.com/wp-content/uploads/2016/10/newtonKS.jpg

Other pictures of the station:

https://www.google.com/search?q=Newton,+Kansas+amtrak+station+pictures&tbm=isch&source=iu&ictx=1&fir=Vj88Is9cwPpkuM%253A%252CZMqzhPeeHvw_LM%252C_&usg=AI4_-kRvUhVAuD6eJfrUwyBLjKyuK0RkYw&sa=X&ved=2ahUKEwjf1I3ak8reAhXwRd8KHd9BDzIQ9QEwA3oECAUQCg#imgrc=Vj88Is9cwPpkuM: 

If you google "Santa Fe Station, Temple, Texas", you will see some architectural similarities in the properties.  The Temple Station was also the division headquarters for the Texas Division.  The division offices were located on the second floor.  

Rio Grande Valley, CFI,CFII

  • Member since
    June 2003
  • From: South Central,Ks
  • 7,170 posts
Posted by samfp1943 on Saturday, November 10, 2018 3:25 PM

CMStPnP

OK, so I kind of understand why this station in Kansas is so large as it is near Witchita, probably is a rail junction there.   Used to be a Hotel and Harvey Lunch Counter as well.     Where I get lost is why the Santa Fe built the station to look like William Shakesperes home..........what is the story behind that?

Amtrak picture of station in Newton, KS.

http://www.greatamericanstations.com/wp-content/uploads/2016/10/newtonKS.jpg

Other pictures of the station:

https://www.google.com/search?q=Newton,+Kansas+amtrak+station+pictures&tbm=isch&source=iu&ictx=1&fir=Vj88Is9cwPpkuM%253A%252CZMqzhPeeHvw_LM%252C_&usg=AI4_-kRvUhVAuD6eJfrUwyBLjKyuK0RkYw&sa=X&ved=2ahUKEwjf1I3ak8reAhXwRd8KHd9BDzIQ9QEwA3oECAUQCg#imgrc=Vj88Is9cwPpkuM:

 

 At the risk raising the ire of those folks who are Santa Fe Historians, or maybe. even former employees of the AT&SF. [Friends of Chico?]Wink

 I have been exposed to much of the railroad history around South East Kansas and specifically Neosho County, Ks. It is a crossroads of Kansas railroading history.

 The Santa Fe had a penchant for building imposing stations, and seemed to follow some similar blue prints for those stations, The Southwester attributes seemed to be present in each location, and at the larger terminal or junction points, they tended to build not only passenger facilities, but managerial and operational building that were fairly impressive, and many incorporated the facilities for the FRED HARVEY dining facilites.  

Chanute was in the early 20th Century, a Division Point for five lines of the Santa Fe.  The Eastern Div. was to the East, and connected with the KCSRR (nee KCP&G RR) at its Division Pt. Pittsburg,Ks.  The AT&SF arrived at Pittsburg, via trackage rights from the Frontenac, Kansas area, KCSRR

The North Div from Chanute to Topeka was done when the LL&GRR was laid down. It went from west of the Topeka area, via Ottawa to Chanute.

The South Div was merged from the original LL&GRR into the Santa Fe. It was taken to the Independence, Ks. area. and eventually into Indian Territory(Okla).

Then there was a line run to the ElDorado Ks. area from Chanute. The line was truncated(1960) with the building of Toronto Dam and Impoundment. Auth. in the Flood Control act of1941 and completed in 1960.  And severed the branchline from Chanute SW (towards Emporia?) and Howard and Wichita area.

Those larger structures (Passenger Facilities and the Fred Harvey restaurants/hotels and employee quarters) tended to be built of brick in the Richardson-Romanesque style)

Linked photo of the Chanute Kansas Station @ https://www.loc.gov/resource/cph.3c18086/

As a side note: The Eastern Div from Chanute to Frontenac was a source for locomotive coal, and had two early petroleum refineries on the line. Great Western Refining Co at Erie,Ks., and a kerosene refinery at Shaw,Ks.  At one time before it closed the GWR had around 150 railroad cars to haul its production.  It was also on the first route of the AT&SF's first McKeen Rail Car that ran from Chanute to Pittsburg. It (M-101(?))was delivered in 1910.  It was delivered in Pittsburg, Ks., and the Eastern Div was where it first ran.  Later McKeens 101 and 102 were used primarily north to Topeka and later to Emporia from the Chanute Div. Point. 

 

 


 

  • Member since
    June 2009
  • From: Dallas, TX
  • 6,952 posts
Newton, KS Passenger Train Station on the former Santa Fe
Posted by CMStPnP on Saturday, November 10, 2018 9:38 AM

OK, so I kind of understand why this station in Kansas is so large as it is near Witchita, probably is a rail junction there.   Used to be a Hotel and Harvey Lunch Counter as well.     Where I get lost is why the Santa Fe built the station to look like William Shakesperes home..........what is the story behind that?

Amtrak picture of station in Newton, KS.

http://www.greatamericanstations.com/wp-content/uploads/2016/10/newtonKS.jpg

Other pictures of the station:

https://www.google.com/search?q=Newton,+Kansas+amtrak+station+pictures&tbm=isch&source=iu&ictx=1&fir=Vj88Is9cwPpkuM%253A%252CZMqzhPeeHvw_LM%252C_&usg=AI4_-kRvUhVAuD6eJfrUwyBLjKyuK0RkYw&sa=X&ved=2ahUKEwjf1I3ak8reAhXwRd8KHd9BDzIQ9QEwA3oECAUQCg#imgrc=Vj88Is9cwPpkuM:

 

 

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy