Trains.com

Window Question . . . why does Amtrak require split windows with a vertical mullion?

3322 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2006
  • 78 posts
Window Question . . . why does Amtrak require split windows with a vertical mullion?
Posted by BostonTrainGuy on Monday, September 20, 2010 10:57 AM

Checking out the specs for the new Amtrak cars at:

http://www.highspeed-rail.org/Pages/DocsSpecs.aspx

I have to ask why Amtrak requires two piece side windows instead of single panes?  The fastest trains in the world have one piece windows so it's not a strength issue.  Amtrak's old Turboliners and Talgos (foreign designs of course) both have single panes so it can't be an FRA requirement.   But the rest of Amtrak's existing fleet (excluding rarities like the high-levels and dome), and the proposed new designs above, all have the split design.  I think a one-piece window looks better, allows better viewing, and might be slightly less expensive to make and maintain.

Does anyone know the reason for this?

  • Member since
    June 2010
  • 275 posts
Posted by travelingengineer on Monday, September 20, 2010 12:40 PM

Could it be that split windows are more easily removed in case of an emergency exit (car on side, upside down, tilted)?  Perhaps an elderly passenger would not have the strength to pull on the current red handle, pull out the rubber gasket, then open the window if it was large and heavy.

  • Member since
    January 2001
  • From: Atlanta
  • 11,971 posts
Posted by oltmannd on Monday, September 20, 2010 12:51 PM

Gotta be cost.  Smaller windows are cheaper and easier to deal with.  As many as they change due to rocks......

-Don (Random stuff, mostly about trains - what else? http://blerfblog.blogspot.com/

  • Member since
    July 2006
  • 78 posts
Posted by BostonTrainGuy on Tuesday, September 21, 2010 8:25 AM

But no regional/commuter rail agency uses that design, and I would think they would experience much more "urban-related" vandalism such as rock throwing.

(Also, it might be quite a challenge to hit a window on a 150 mph Acela as it blows by.) 

  • Member since
    December 2001
  • 8,156 posts
Posted by henry6 on Tuesday, September 21, 2010 9:54 AM

Is it because of vandalism or because North American standards are heavier than Eurpoean standards thus the added post support?

RIDEWITHMEHENRY is the name for our almost monthly day of riding trains and transit in either the NYCity or Philadelphia areas including all commuter lines, Amtrak, subways, light rail and trolleys, bus and ferries when warranted. No fees, just let us know you want to join the ride and pay your fares. Ask to be on our email list or find us on FB as RIDEWITHMEHENRY (all caps) to get descriptions of each outing.

  • Member since
    January 2001
  • From: Atlanta
  • 11,971 posts
Posted by oltmannd on Tuesday, September 28, 2010 6:42 AM

BostonTrainGuy

(Also, it might be quite a challenge to hit a window on a 150 mph Acela as it blows by.) 

 SIx 85' passenger cars take 2.3 seconds to go past.  That's plenty of time.

There is more window than space between the windows, so you'd have a much better chance of nailing a window than missing if you had the right elevation.  If you stood 50 feet away and threw a rock at 35 mph and started your toss as the locomotive passed, you'd hit the train in the middle of the second coach.

Breaking the windows is a bit more difficult.  A 35 mph toss of a small rock wouldn't do it.

-Don (Random stuff, mostly about trains - what else? http://blerfblog.blogspot.com/

  • Member since
    January 2001
  • From: Atlanta
  • 11,971 posts
Posted by oltmannd on Tuesday, September 28, 2010 6:45 AM

BostonTrainGuy

But no regional/commuter rail agency uses that design, and I would think they would experience much more "urban-related" vandalism such as rock throwing.

 They also don't use the double glazing that Amtrak does.  Amtrak uses glass on the outside and polycarbonate on the inside.  I know the SEPTA Silverliners use (or at least, used)only single glazing of polycarbonate.

-Don (Random stuff, mostly about trains - what else? http://blerfblog.blogspot.com/

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy