UP's SD40 rebuild program will include the EMD 1033 part Also, from what I understand most if not all Railroads are adding the 1033 part on their Dash 9 Overhauls at this time.
I also haven't heard of anyone doing this to the Dash 8 line.
Incidentally, the recent CSX SD50 rebuilds also included the 1033 part. The person who told me about that wasn't sure the EMD 1033 part could even be applied to a 645F hense the swapout to E.
The main advantage of going to a 710ECO or GEVO swap is lower fuel consumption. They are cleaner as well, but they aren't required per EPA.
YoHo1975GE has released an upgrade to the 7FDL so that it will meet requirements for EPA rule 40 CFR Part 1033. So you don't need to do an engine swap to meet epa regulations. So the environment, in isolation is not a reason to get rid of these at all.
Interesting, although I have seen any evidence of any railroad rebuilding Dash-8 GEs yet. UP and NS have started limited rebuilding of their EMD 60 series locomotives. The UP with new ECO repowers, and NS in kind but add a new widenose cab. Price has always been the issue with parts for GE locomotives.
I took a couple pictures yesterday of some of these units
My train videos - http://www.youtube.com/user/karldotcom
Its BNSF are getting new locomotives?
Thanks, I wasn't aware of the recent developments with the remaining C&NW Dash 8's.
Leo_AmesThomas 9011Wow I haven't seen any C40-8's around in a long time.I used to track locomotives pretty close when I was working for the Union pacific through their computers and the C40-8 was all but gone way back in 2001.There was a some CNW C40-8's that were still in service and I was told that was only because there was still a old union agreement with them prior to the UP merger as a service contract for mechanic work. My information shows that Union Pacific still rosters 250 of it's original 257 Dash 8-40C locomotives. and 47 of the North Western's 77 examples. So nearly 300 remain on Union Pacific's roster and just 37 have been retired due to wreck damage or leases not being picked up in the case of many of the North Western units over the course of 2008 and 2009 that had a seperate lease agreement from the remainder. Furthermore, this class hasn't seen widespread periods of storage until this recession hit in late 2008 and was intact besides wreck retirements well past 2001.
Thomas 9011Wow I haven't seen any C40-8's around in a long time.I used to track locomotives pretty close when I was working for the Union pacific through their computers and the C40-8 was all but gone way back in 2001.There was a some CNW C40-8's that were still in service and I was told that was only because there was still a old union agreement with them prior to the UP merger as a service contract for mechanic work.
My information shows that Union Pacific still rosters 250 of it's original 257 Dash 8-40C locomotives. and 47 of the North Western's 77 examples.
So nearly 300 remain on Union Pacific's roster and just 37 have been retired due to wreck damage or leases not being picked up in the case of many of the North Western units over the course of 2008 and 2009 that had a seperate lease agreement from the remainder. Furthermore, this class hasn't seen widespread periods of storage until this recession hit in late 2008 and was intact besides wreck retirements well past 2001.
UP 9063 the last of the first two C&NW orders was retired on 2/3/10, while the third order, now UP 9065 - 9099 were all retired on 2/23/10 and all were returned to the lessor for disposition So all the former C&NW Dash-8s are now off the UP roster.
HERBYD HOW ARE THE GEVO250 ENGINES STANDING UP . ANY TROUBLES OTHER THEN THE TURBO FIASCO. HARD TO BEAT THE EMD ENGINES. DONT THROW THE BABY OUT WITH THE BATH WATER. IME HERE FROM THE GOVERNMENT TO HELP.
HOW ARE THE GEVO250 ENGINES STANDING UP . ANY TROUBLES OTHER THEN THE TURBO FIASCO. HARD TO BEAT THE EMD ENGINES. DONT THROW THE BABY OUT WITH THE BATH WATER. IME HERE FROM THE GOVERNMENT TO HELP.
I assume the last part of your post has something to do with the GM bailout which has nothing to do with EMD as General Motors sold the company a few years back... so there is no "baby" in that bathwater...
"I Often Dream of Trains"-From the Album of the Same Name by Robyn Hitchcock
What is involved with preparing a motor for deadline storage?
Wow I haven't seen any C40-8's around in a long time.I used to track locomotives pretty close when I was working for the Union pacific through their computers and the C40-8 was all but gone way back in 2001.There was a some CNW C40-8's that were still in service and I was told that was only because there was still a old union agreement with them prior to the UP merger as a service contract for mechanic work.The C40-8's were sure a pain in the butt to ride in.They were just bad as the C30-7's with the cramped cab.If you had to ride in the front conductors seat you had to sit sideways for the whole ride as there was not enough room for your legs as the door was almost to the seat itself.Switching on them was also a pain as the ladders were straight up and not staggered like on the SD40-2's which made standing on them difficult.I loved the sound though and they pulled just as good as any locomotive out there.Not sure about the BNSF C40-8's and what will become of them.
Those Union Pacific SD60's were a miserable piece of junk.I swear I must have boarded all of their SD60's at one time or another and every single one of them had the cab interior hanging down or it was removed.Either way the cab looked trashed.I don't know why but Union Pacific loved putting a lot of seats in those SD60'S.Most of them had 5 or 6 seats but it wasn't unusual to find 8 seats in them.There was also a small flip up toad stool seat on the back of the cab.When ever the SD60's came to town they were usually bad ordered.
The BNSF SD60's on the other hand seemed to have done a outstanding job both in holding up their paint and staying reliable.
There's an ongoing discussion about the former ATSF C40-8Ws on locophotos.
http://www.locophotos.com/Read.php?ThreadID=16343
One person says the 25 C40-8Ws BNSF is returning to the leaser will be shipped south of the border to a Mexican railroad. I know that in the last 10 years a lot of former Class 1 6-axle Dash7 C307/36-7s have been shipped to Mexico and South America for service on those countries' railroads. I guess the same will happen to the C40-8/8Ws as these are retired from Class 1s, though I guess some Dash 8s could end up on US or Canadian shortlines and regionals too, which I think is already case with some early Dash 8s. IMO, it's better than sending old GE's to the scrapper. If GE ever gets it's GEVO repowering program going, it may be possible to rebuild Dash 8 and 9s with 6, 8, or even 12-cylinder GEVOS, though GE hasn't had a major rebuild program since the Super7 in the early 90s.
BNSFwatcher When we bought our first batch of "Dash 9-44CWs", we numbered them from 961 to 1123, with the incipient merger in mind. Lovely rigs they be, in the faux Great Northern orange and green. The AT&SF units fell into the lower numbered rankings, as their birthright. All are still around, working hard, as only GEs can do! I'ma going to be looking out for unit #960, as that might have been a Dash 9-44CW. Dunno, me. Hays
When we bought our first batch of "Dash 9-44CWs", we numbered them from 961 to 1123, with the incipient merger in mind. Lovely rigs they be, in the faux Great Northern orange and green. The AT&SF units fell into the lower numbered rankings, as their birthright. All are still around, working hard, as only GEs can do! I'ma going to be looking out for unit #960, as that might have been a Dash 9-44CW. Dunno, me.
Hays
You are right about the numbering starting at 961. I missed those units but they are listed and are the first orange and green units without all of the stripes.
silicon212 http://www.railpictures.net/images/d1/5/5/0/5550.1170975600.jpg They do? I was under the impression that only the ATSF ones had that gullwing cab.
http://www.railpictures.net/images/d1/5/5/0/5550.1170975600.jpg
They do? I was under the impression that only the ATSF ones had that gullwing cab.
This picture is one of the new GEVO ES44AC unit and is a regular GE cab. All of the new GEVO units seem to be the regular GE cab for both AC or DC models on the BNSF. There might be exceptions but I have not seen them. It seems most if not all of the Dash9-44CW purchased by the SF and the BNSF have "Gull Wing" cabs, but not any of the new GEVO models.
CZ.
beaulieu edbenton Trucks are different and on the ATSF's C-40-8Ws the cab was shaped like a Gullwing to clear the York Canyon mine loader. They were the only ones with that shaped cab. Trucks are indeed different, but all BNSF GE's have the "Gull-wing Cab".
edbenton Trucks are different and on the ATSF's C-40-8Ws the cab was shaped like a Gullwing to clear the York Canyon mine loader. They were the only ones with that shaped cab.
Trucks are different and on the ATSF's C-40-8Ws the cab was shaped like a Gullwing to clear the York Canyon mine loader. They were the only ones with that shaped cab.
Trucks are indeed different, but all BNSF GE's have the "Gull-wing Cab".
I don't think so. Most of the Santa Fe units that became BNSF had the "Gull-wing Cab", but BNSF has gone back to regular cabs on many of the latest units. BNSF did continue to purchase Dash 9's with the Gull Wing Cab but that seems to be over now. The first group of Dash 8-40BW ( 500 - 559 ) did not have the Gull-wing-cabs but the last order of those units were the first Gull Wind Cab GE's. All of the SF 8-40CW's (800 to 951) and SF Dash 9-44CW's ( 600 to 699) had the Gull Wing Cab.
CZ
The 1000 and 1100 series Dash9-44CW were BNSF and had the Gull wing cab. I am not sure when they stopped the special cab orders, but the new GEVO units do not have it.
http://archive.trainpix.com/bnsf/GEORIG/C44-9W/1020.HTM
1100 series below
http://archive.trainpix.com/bnsf/GEORIG/C44-9W/1103B.HTM
4700 series new in BNSF Warbonnet with Gull Wing
http://archive.trainpix.com/bnsf/GEORIG/C44-9W/4711.HTM
4800 and 4900 series had Gull Wing Cabs
http://archive.trainpix.com/bnsf/GEORIG/C44-9W/4909.HTM
ES Models GEVO
http://archive.trainpix.com/bnsf/ROSTER.HTM
http://www.railpictures.net/viewphoto.php?id=226700&nseq=55
I see a huge differance in the cabs in the previous post and this one.
edbentonTrucks are different and on the ATSF's C-40-8Ws the cab was shaped like a Gullwing to clear the York Canyon mine loader. They were the only ones with that shaped cab.
We get some Dash 8-40CWs (Railway nomenclature) thru Shelby every day, on the 'High Line' and the branches. They all aren't in storage. Business is picking up, albiet slowly. One new coal train, from Signal Mountain Mine, almost daily, headed west with 2+2 4400s. No potash monsters lately, but it is "windmill season" again and that's always interesting. Thanks, San Diego!
UP's rebuilding their SD60M's BNSF havent ran for a long time Id like to see them out and bad im tired of seeing H2 and H3 i need some green.
Lyon_WonderAs some you probably already know, most if not all of BNSF’s #800-950 series C40-8Ws are in storage in CA. I guess they were deadlined due to the economy. Though this could be taken with a grain of salt, rumor has it that BNSF is going take some of these former ATSF-Dash-8s off lease, even though some of them have been repainted into the 2005+ BNSF swoosh. I wonder how many Dash 8s have been retired by Class 1s? I know UP retired their former CNW C40-8s. I wonder if the Dash 8s will fare the same or better than their Dash 7 and U-boat predecessors? And I wonder if EMD’s 60-series will outlast the same-vintage Dash 8s in class 1 service? BNSF has former BN SD60Ms and ATSF has GP60/60M/60Bs, and the other class 1s have 60-series locos too.
This issue is more than just reliability. The EPA has mandates for the Tier I, Tier II and lower levels of diesel exhaust the will force older units to be retired long before they serve out their time. Some of the SD60M's are now being rebuilt with 710 computer controller motors and lowered HP rating to utilize the older units for continued use in California and probably other places in the future.
At some point in time, all of the diesels will have to meet lower levels of exhause emissions.
Given that EMD's Dash 2 line have far outlasted GE's contemporary U-boats and Dash 7s I think the answer is yes...
Our community is FREE to join. To participate you must either login or register for an account.