Trains.com

Diesel MPG

85479 views
33 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2003
  • From: US
  • 24,981 posts
Posted by BaltACD on Saturday, May 30, 2009 2:42 PM

One carrier that I am aware of, for locomotive management purposes, rates  the GE AC's for 1100 miles for a full 5000 gallon tank in unit train service.  Other, less stressed, services have longer mileage intervals.

Never too old to have a happy childhood!

              

  • Member since
    November 2007
  • 2,989 posts
Posted by Railway Man on Saturday, May 30, 2009 10:33 AM

As others said above, everything depends on the route, speed, and weight of train!  But I think what you're looking for is averages.

Here's an example that may help.  A particular coal train I have worked with runs 1,670 miles round-trip between the mine and the power plant.  The route is mountainous throughout, with numerous long ascending grades.  The train is 135-cars long with gross weight of  18,500 tons (including locomotives).  Each locomotive carries 5,000 gallons of fuel.  In that round trip, the train will refill twice, each time each locomotive taking on about 4,000 gallons.  So:

Total fuel consumed round trip = 20,000 gallons

Total mileage 1,670

Miles per gallon per locomotive = 0.41. 

But again, this is only a specific case.  Other cases are much much different. 

Another way of obtaining an average is to use the US Energy Information Administration's averages for the U.S. as a whole.  EIA found that in 2006, the BTUs per ton/mile average for freight transportation modes were:

  1.  337 - Rail
  2.  514 - Water
  3. 2,801 - Truck
  4. 21.976 - Air

So in rough equivalent numbers, if the average 80,000 lb. semi-trailer combination is getting 8 mpg to move 26 tons of freight, the average train is getting 66 mpg to move 26 tons of freight.

RWM

 

  • Member since
    February 2005
  • 2,350 posts
Posted by timz on Friday, May 29, 2009 4:08 PM
In Idle, a large diesel locomotive burns maybe 5? gallons per hour. At full power it burns something over 200 gallons per hour. So you need to make some guesses about how much time it's spending idling and how much at full power, and how fast it's covering the miles.
  • Member since
    December 2001
  • From: Denver / La Junta
  • 10,789 posts
Posted by mudchicken on Friday, May 29, 2009 3:58 PM

Tonnage? grade & curvature? MU'd/DPU'd with? Engineer qualification?, wind? axle count? 

I think you get the point....

Mudchicken Nothing is worth taking the risk of losing a life over. Come home tonight in the same condition that you left home this morning in. Safety begins with ME.... cinscocom-west
  • Member since
    November 2008
  • From: North Jersey
  • 1,781 posts
Diesel MPG
Posted by ns3010 on Friday, May 29, 2009 3:12 PM

How far does the average diesel locomotive go between refuels, and how many MPG does it get? Are they all in the same range, or does it vary?

For example, say that a train with a 3000 gal. fuel tank travels 100 miles each day, every day. On day 1, it starts its work with a full tank. How many days later would it need a refuel?

Thanks in advance.

My Model Railroad: Tri State Rail
My Photos on Flickr: Flickr
My Videos on Youtube: Youtube
My Photos on RRPA: RR Picture Archives

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy