Does anyone know if the B&O ever owned any six axle PA locomotives? They had four axle FAs but I can't find any mention of PAs on any of the diesel rosters, or archives.
Never did.
The only northeast PA's were on the Pennsy, New Haven, Erie (And subsequently, the Erie Lackawanna), Lehigh Valley, New York Central (And subsidiary Pittsburgh & Lake Erie), Wabash, and the Nickel Plate.
If you have a collection of back issues or one of the DVD collections, Trains ran an excellent overview about their career in the November 1966 issue, just as the PA era was winding down. Only were left on the Santa Fe, Rio Grande, and the Southern Pacific at this time.
And none of those were long for this world other than the lucky quartet on the Santa Fe that went on to enjoy a second career, surviving to this day as museum pieces in two countries.
Yeah, they bought a decent sized fleet of E7's, E8's, and E9's during the PA era.
Among their other passenger purchases during the postwar years, they also ordered GP7's and F3's with steam generators. And we can't forget their 10 FA2's and 5 FB2's in their FA fleet which were equipped with steam generators and saw some passenger use, especially for extras like troop trains. And I bet there were others like some of their large GP9 fleet.
I believe that they also inherited some FP7's from the C&O, but I've only ever seen pictures of them leading freight trains. Whether or not they ever handled passenger runs or even still had their steam generators by then, I don't know.
Edit: And here's a GP9.
http://www.borail.org/6607.aspx
I'm no expert on the B&O, but they had a sizeable passenger business and I suspect a good portion of it was handled not by streamlined diesels or RDC's, but by EMD Geeps.
I always liked their blue/grey passenger geeps, very nice looking. They usually headed up school patrol trips from Wheeling, WV. to Washington DC. in the 60's. All gone now, kinda sad, the beautiful station is still there and being used by a community college, it has a small museum inside.
B&O started with EA's in AB combinatiions, then bought E6 AB combinations. These were followed by E7 AA sets and later E8 A's and B's and E9 A's and B's. Some of these latter units were rebuilt from old EA's.
F units in passenger service were a mere seven AB F3 sets. These didn't pan out as planned and eventiually ended up on secondary trains, finally being renumbered and reassigned to freight service. I believe those units kept their steam generators and high speed gearing for quite a while after the reassignment.
Twenty F3AA freight sets were delivered with steam generator in one unit and extra water capacity in the other for operation on lines in Ohio, Indiana, and Illinois. Then ten more F3AA (phase IV) sets followed for operation in the general territory around Wheeling-Pittsburgh-Bulffalo with the same setup. These were freight engines, but could be pressed into passenger service if needed. These latter ten sets were later spliced with F7B units to eliminate helpers. After that, additional freight F7 and FA units were also delivered with steam generators.
Passenger GP's were mostly used on commuter trains out of Washington and Pittsburgh, and a few selected secondary/branch runs. Around 1960, the three cars of B&O train 17 & 18 were handled behind E units east of Akron as part of trains 9 & 10. From Akron to Cleveland, a torpedo tube passenger GP was used. GP's were also used on many specials, especially on weekends when they weren't needed for commuter service. I once saw a passenger GP in service behind an E7A on the westbound Shenandoah (no. 7) in Akron, but this was probably due to the failure of the assigned second unit, and was a rare occurrence.
Many of these passenger and freight sets were delivered with the intention that they would regularly operate with their assigned companion unit(s), and they usually operated that way until some time around the 1950's. Then sets were broken up, and units might operate with any other available unit. Geographical limits were also eventually relaxed.
FP7's from C&O came much later, and were probably never used in passenger service by B&O.
As to the original question, B&O never owned a PA unit. The only ones I ever saw in that livery were in HO scale, by Athearn, and they were bogus.
I would add Southern to the list of roads that operated PA's in the East. Maybe Virginia is more properly thought of as the South, but any engine that made its way into DC probably ought to be included, IMO.
Tom
I came across a Con-Cor N scale PA1/PB B&O unit in the blue/grey paint scheme, which prompted my search. Obviously some model manufactures don't vet their designs.
They will produce what sells. I had forgotten about N scale. Now that you mention it, I think Con Cor (or somebody) also made an equally bogus B&O DL-109.
For modeling purposes, any EMD E unit would be OK for B&O except for some of the unusual uniques (E1; E2). B&O never had an E7B, but even that would be OK since E6B's were visually identical.
Thanks for the info, Tom. I've been modeling in N scale for some time now and volunteered for the Hocking Valley Scenic Railway for several years. I'm not licensed but worked my way up to driving their C&O GP-7 and a GP-10 they have. Lot of fun!
Southern's PA's were bought to replace the DL-109's on the Tenneseean between Bristol and Memphis, with spares handling the Chattanooga-Memphis local.
So I think it's fair to exclude them from a list of Northeastern PA's. Southern's service into the Northeast was the domain of FP7's and E units, although it's impossible to definitively state that one never wandered into D.C. at least once.
Leo, I doubt that any Southern PA ever went north and east of Bristol. I did not see either the Tennessean or the Chattanooga-Memphis local often when the PA's were the power, but, considering their schedules, I have the impression that this service kept the Alco's busy, with no opportunity for sight-seeing.
It is my understanding that as soon the Southern's E's began running through, the PA's were sent to Atlanta and stayed there until they were disposed of.
Johnny
Thank You.
I checked Curt Tillotson's book on Southern Diesels and it said that Southern bought six PA's in 53 and traded them in 65. It also said that they were used mostly in service west of the Appalachians and were assigned to the NO&NE.
vbeach I checked Curt Tillotson's book on Southern Diesels and it said that Southern bought six PA's in 53 and traded them in 65. It also said that they were used mostly in service west of the Appalachians and were assigned to the NO&NE.
Occasionaly, they (PA's) would find their way to Memphis, on The Tennessean.
Since they lived in Tennessee, I'd say that it was far more than occasionally. They'd of enjoyed thousands of visits to Memphis during their career.
Excluding pictures of them sitting in a deadline in Georgia never to run again, I think i've seen one picture in total of a Southern PA outside of that state to date. So I see no reason to doubt what J. David Ingles has said about them in the pages of this magazine in his popular article that I already referenced earlier.
Didn't the Delaware and Hudson have some ex santa Fe PA's?
Indeed they did...
I barely remember the NKP "Bluebird" PA's, but Erie/EL PA's are more firmly etched in my mind. I only saw them in freight service so it was a surprise to me when I read JDI's article in TRAINS and found out that PA's were passenger power.
Erie PA - the locomotive, not the City...
Nickel Plate Bluebird...
I did not see the Tennesean often when I was in Bristol from 1954 on (its timing interfered with college)--but every time I saw it, it had PA's until the Southern engines began running through from Washington to Memphis, Birmingham, and New Orleans--and I saw only EMD products on the Pelican and Birmingham Special.
Here you go, Mr. Deggesty! They are quite the grand conveyance!
CSSHEGEWISCH I barely remember the NKP "Bluebird" PA's, but Erie/EL PA's are more firmly etched in my mind. I only saw them in freight service so it was a surprise to me when I read JDI's article in TRAINS and found out that PA's were passenger power.
The EL PAs would often arrive in Chicago in the AM after handling an overnight passenger, then would run a transfer job over to Clearing before returning to handle the passenger train going east. They could fairly reliably be seen at Hayford heading into Clearing around 10A in the early 60s.
Our community is FREE to join. To participate you must either login or register for an account.