Trains.com

Upside Down Railcam AT MP-235

910 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2002
  • From: Muncie, Indiana...Orig. from Pennsylvania
  • 13,456 posts
Posted by Modelcar on Sunday, June 23, 2002 10:26 PM
Just tried the 235 Webcam...and indication is it's not available now...I don't know if it's been available recently as I haven't watched it for some weeks now....Has anyone caught the "Swing Bridge" in the rotated open position...?

QM

Quentin

  • Member since
    June 2001
  • From: Evergreen Park, IL
  • 93 posts
Posted by alangj on Tuesday, June 18, 2002 9:56 PM
Maybe the answer to your #3 is to take some of the "hot air" that's been generated in this discussion thread and use it to buoy up the car.

AGJ
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, June 16, 2002 7:00 PM
I've been told that Indy and Formula 1 race cars develop enough negative lift that they could run around on the ceiling if you can figure out how to hold it up there until it gets up to speed, so:

1. Get an Indy car or a Formula 1 car, your choice
2. Mount your monitor over the dash (they already have computers in them)
3. Solve the "hold it up there until it gets up to speed" problem
4. Drive around on your living room ceiling watching the webcam

Glad to have been some help,
Bob Netzlof
  • Member since
    March 2002
  • From: Milwaukee WI (Fox Point)
  • 11,439 posts
Posted by dknelson on Wednesday, June 12, 2002 8:14 AM
I'm told the webcam looks right side up in Australia so maybe we all need to move there
  • Member since
    June 2001
  • From: US
  • 13,488 posts
Posted by Mookie on Wednesday, June 12, 2002 6:46 AM
I have gotten a lot of early morning laughs out of this. Between the "wet window @ Rochelle" and the poor monitor, it has been very entertaining!

She who has no signature! cinscocom-tmw

  • Member since
    June 2001
  • From: Evergreen Park, IL
  • 93 posts
Posted by alangj on Tuesday, June 11, 2002 11:47 PM
If the "anti-gravity" concept isn't working for you, I suppose someone could also opt for a bit of yoga and practice doing a headstand in front of the monitor with the inverted image.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, June 4, 2002 2:28 PM
You know, it worked OK along as I could keep my chair on the ceiling!
  • Member since
    June 2001
  • From: US
  • 13,488 posts
Posted by Mookie on Tuesday, June 4, 2002 1:33 PM
Tom: with all the "heavy" dialogue going back and forth, it was a nice change of pace. Sorry about the equipment, but you must admit the 180 degree was kind of funny!

She who has no signature! cinscocom-tmw

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, June 4, 2002 1:21 PM
Sorry for the upside down image, that problem is now fixed. We are still having problems with the controls, we have now ordered a new VISCA cable between the camera and the server, since all of these components were "fried" a couple of weeks ago...lightning we suspect. The control cable should be installed within a week. Sorry for this inconvenience.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, June 3, 2002 1:58 PM
Probably a little weight training with our monitors would be helpful to all our computer bound readers (and Trains.com staff). It wasn't our intent, however. The MP-235 cam is supplied by a private contractor. He had to take the camera down for repairs, and when he put it back up some glitches showed up. He is working on the problem and tells me it will be fixed soon.

Tom Chmielewski
Editor, Trains.com
  • Member since
    June 2001
  • From: US
  • 13,488 posts
Posted by Mookie on Monday, June 3, 2002 9:31 AM
a little railroad humor... :)

She who has no signature! cinscocom-tmw

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, June 3, 2002 9:03 AM
Try turning your monitor 180 degrees.
  • Member since
    April 2003
  • 305,205 posts
Upside Down Railcam AT MP-235
Posted by Anonymous on Saturday, June 1, 2002 7:36 PM
Yes I clicked the Low view of the MP=235 Railcam and its Upside Down how do I fix it Upright. thanks

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy