Login
or
Register
Home
»
Trains Magazine
»
Forums
»
General Discussion
»
What is "Select-A-Power"?
What is "Select-A-Power"?
3926 views
6 replies
Order Ascending
Order Descending
Anonymous
Member since
April 2003
305,205 posts
What is "Select-A-Power"?
Posted by
Anonymous
on Saturday, May 18, 2002 2:39 AM
I recall seeing Conrail engines with this lettering just below the engine number on the side of the cab. I am curious as to what the "Select-A-Power" is. Is it some type of fuel saving device? I have seen this on everything from GP-15s to SD-40s. Anyone know?
Todd C.
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Sunday, May 19, 2002 3:42 AM
SP had some units that had a little control box that could take some of the trailing units off line or kill them (I cannot remember which) for fuel conservation. I think it was called "Select-A-Power". Was not real popular.
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Sunday, May 19, 2002 9:57 PM
its not for shuting down units... i have seen it...i have run locomotives with it..but i didnt use it... it dose have something to do with the amout of amperage the traction motors use..or something like that...ill have to take a look at the train handleing rules and see if i can find anything about it...ill get back to you on this....
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Tuesday, May 21, 2002 1:55 AM
Thanks, Gary, I'd be interested if you can find anything on this.
Todd C.
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Tuesday, May 21, 2002 10:44 AM
Conrail cyclopedia calls it Harmon Select-A-Power which, when used, put a trailing locomotive into notch one. Enough power to not be a drain on the remaining power yet low enough to save on fuel.
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Tuesday, May 21, 2002 8:57 PM
Select a power was a system we used before we were split up between CSX and NS. Basically the engineer could put some of the trailing units in notch one from the leaders cab which saved fuel without the crew having to walk back and isolate the engines not needed, and he could also disengage it from the leader if they needed the power to get rolling again after a stop or to pull a grade all the engines had to have it installed for it to work properly but it is not used to my knowledge any more because of the mixed consists we pull with now since the split up. The electricians know more about this system than us machinist's do as they were the ones who maintained them. MrCNJ
Reply
Edit
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Monday, May 27, 2002 2:36 AM
Thanks so much for the info. This truly is a great "chat-room". If anyone needs info on Grand Trunk Western, that's my speciality. E-mail me at Buford6126@aol.com
Thanks again, Todd C.
Reply
Edit
Join our Community!
Our community is
FREE
to join. To participate you must either login or register for an account.
Login »
Register »
Search the Community
Newsletter Sign-Up
By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our
privacy policy
More great sites from Kalmbach Media
Terms Of Use
|
Privacy Policy
|
Copyright Policy