steve24944I wanted to post a picture, but photobucket doesnt work anymore
It appear to me Photobucket has slit their own throat.
Norm
There is a dwarf signal at the exit of the center passing track on the UP Line over Soldier Summit Utah. This location is about 8 miles East of Soldier Summit. Called Kyune on the USGS quad. This signal is a new signal, ( last 6-8 years ? )
The old Denver Rio Grande used dwarf signals as exit signals out of passing sidings, but UP is replacing these with tall mast signals.
I wanted to post a picture, but photobucket doesnt work anymore
Steve
CShaveRR The "semaphore" dwarf signals (blade on a metal disc) were also at the CNW Chicago Passenger Terminal (I think it may have become Ogilvie before those things disappeared). They were supplanted by the LED lights in the photograph we commented on earlier. Those signals, in either incarnation, are merely switch position indicators, and convey no movement authority.
The "semaphore" dwarf signals (blade on a metal disc) were also at the CNW Chicago Passenger Terminal (I think it may have become Ogilvie before those things disappeared). They were supplanted by the LED lights in the photograph we commented on earlier. Those signals, in either incarnation, are merely switch position indicators, and convey no movement authority.
Back in my day (before the fancy LED's), those little rotating signals between Bridge "A" and the depot (all controlled by the Lake Street tower) were authorization but not switch position indicators.
One place where "pot" signals were often found was in double-track territory (or other directional track running), where they governed any movement against the current of traffic. Our little stretch of railroad here had them until CTC was installed in the late 1980s or early 1990s. I'm surprised they didn't get buried in the ballast from time to time.The "semaphore" dwarf signals (blade on a metal disc) were also at the CNW Chicago Passenger Terminal (I think it may have become Ogilvie before those things disappeared). They were supplanted by the LED lights in the photograph we commented on earlier. Those signals, in either incarnation, are merely switch position indicators, and convey no movement authority.
Carl
Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)
CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)
Here's the NORAC signals:
This particular chart doesn't show the B&O CPLs with their modifying lamps above and below. There are still a few in service.
Larry Resident Microferroequinologist (at least at my house) Everyone goes home; Safety begins with you My Opinion. Standard Disclaimers Apply. No Expiration Date Come ride the rails with me! There's one thing about humility - the moment you think you've got it, you've lost it...
In the PRR signal chart a few posts back the rectangular dwarfs that look like dominoes are Chicago Union Terminal signals. I don't know for sure whether Amtrak has retained them.
NKP guy {Snip} Yes, Semper Vaporo, the approach to CUT did look similar to the fine photo you included and asked about. Thank you for the illustration of my point. When it comes to capturing the beauty and romance of railroad signals at night, I suggest that no one did this better than the late, great artist of railroading, Ted Rose. But I like photos such as yours, too. {Snip}
{Snip}
Yes, Semper Vaporo, the approach to CUT did look similar to the fine photo you included and asked about. Thank you for the illustration of my point. When it comes to capturing the beauty and romance of railroad signals at night, I suggest that no one did this better than the late, great artist of railroading, Ted Rose. But I like photos such as yours, too.
I should point out that the photo is not mine... I just did a web search for "Railroad Dwarf Signals at night" and found that photo (along with lots of silly unrelated images), and just linked to it in my post.
I like the image too. I am sure I have seen others (that I was thinking of when I did the search) but didn't find. But, I like the trackwork more. I enjoy the tracks in the snow I make when I turn my car around in my driveway (so I don't have to back down the narrows between my neighbor's gas meter and a window-well of my house). The tire tracks in the snow remind me of the tracks in the throat of a terminal like the one shown. Always makes me smile when I see them.
Semper Vaporo
Pkgs.
NKP guy I've enjoyed and learned a lot from reading the posts on dwarf signals. Yes, Semper Vaporo, the approach to CUT did look similar to the fine photo you included and asked about. Thank you for the illustration of my point. When it comes to capturing the beauty and romance of railroad signals at night, I suggest that no one did this better than the late, great artist of railroading, Ted Rose. But I like photos such as yours, too. BaltACD: Thanks for the photos of the differernt types. I'd sure like to buy one on Ebay and position it by my driveway where one lane goes to two. But then again, I'd like to have been able to install streetcar tracks in the concrete of my new driveway when I had it installed a few years ago, too. Firelock76: Thanks for seeing what I saw (see?) in those colored lights. I think many of us here have long appreciated what I might call industrial beauty.
I've enjoyed and learned a lot from reading the posts on dwarf signals.
BaltACD: Thanks for the photos of the differernt types. I'd sure like to buy one on Ebay and position it by my driveway where one lane goes to two. But then again, I'd like to have been able to install streetcar tracks in the concrete of my new driveway when I had it installed a few years ago, too.
Firelock76: Thanks for seeing what I saw (see?) in those colored lights. I think many of us here have long appreciated what I might call industrial beauty.
Here's some items for sale, including a few dwarf signals.
https://www.discoverlivesteam.com/discoverforsale/forsale/fullscale/index.htm
Jeff
There are low signals and dwarfs. Not quite the same thing.
-Don (Random stuff, mostly about trains - what else? http://blerfblog.blogspot.com/)
BaltACD: Thanks for the photos of the differernt types. I'd sure like to buy one on Ebay and position it by my driveway where one lane goes to two. But then again, I'd like to have been able to install streetcar tracks in the concrete of my new driveway when I had it rebuilt a few years ago, too.
Semper Vaporo I don't know where this is, but is this similar to what you used to see?
I don't know where this is, but is this similar to what you used to see?
I can see what NKP guy means. Those signals were meant to be pragmatic of course, and esthetics didn't enter into the equation, but they ARE beautiful!
Observed Sun Rail's end of track under construction at Poincianna. They installled a dwarf signal for the storage track exiting onto the main line track 1. What was unique was it is a full size hooded signal such as are installed on overhead bridges. It had 4 positions all with LED bulbs. Red, yellow, green, & lunar.
Imagine that signal is for restricting (W) to go into station track 2 that dead ends, Regular R/Y/G for station track 1 that continues onto Lakeland and W if another train is on CSX track just west of station. CSX does have freight spur just west of station. Of course there is also Amtrak trains that come thru the station on track 1.
tree68 Overmod PRR and some others used position-light dwarfs; I believe B&O had CPL versions but I can't check from here. Seems like I've seen pictures of semaphore versions as well, usually as a disk with a stripe on it.
Overmod PRR and some others used position-light dwarfs; I believe B&O had CPL versions but I can't check from here.
Seems like I've seen pictures of semaphore versions as well, usually as a disk with a stripe on it.
PRR Style dwarf
B&O CPL dwarf
Never too old to have a happy childhood!
mvlandsw Semper Vaporo I don't know where this is, but is this similar to what you used to see? I believe this is the C&NW terminal in Chicago. Does anyone know what the stars mean?
I believe this is the C&NW terminal in Chicago. Does anyone know what the stars mean?
Yes, this is the end of the platforms at Ogilvie Transportation Center, looking out.
They aren't really stars: they're small lunar-shite lights, simply indicating that this is the first signal encountered when leaving the station (each of the 16 tracks has this). There is also a single light on the rear of the signal, in case the locomotive is beynd the signal: if it's lit, the signal is green and you're lined up to the next signal.
UP still has a couple of control points in Omaha that has them on main tracks where clearances are tight. Used to be more, including some on the Council Bluffs yard throat, but signal upgrades and track changes (some former power switches are now hand throw) eliminated them. We call them "pot" signals and a few were a PITA in the day time because they couldn't be seen until you were real close.
I have seen many a dwarf at the end of a pass track. I do not recall, though I know that they are necessary, seeing a tall dwarf in single track territory where heavy snowfall is expected.
Johnny
Dwarf signals serve the same purpose as the typical high signals. A very common place to find them is in terminals where there is insufficient room between the tracks to fit a signal mast clear of passing trains. The dwarf is short enough to be in the notch at the bottom of the normal clearance envelope. But because the low position limits distant visibility they are normally used only in places where speeds are relatively slow. Where clearance is a problem but speeds are higher you wil normally see high signals mounted above the tracks on a signal bridge or cantilever but that is a more expensive solution.
Some railroads on single track lines would have signal masts for the main track signals and a dwarf signal for leaving the siding. That made it clear which track the signal was controlling from a considerable distance.
I somehow have a memory of seeing pictures of dwarves with semaphore blades.
The approaches to the station in Denver have dwarves, as do the approaches from the north to the station in Salt Lake City. When the westboundCZ comes in here after crossing Wyoming (it comes in at night unless it is horribly late), the UP conductor simply tells the UP engineer what each dwarf signal indicates as the train backs in--the conductor's visibilty is very limited, as there is little, if any, outside lighting along the way.
BaltACDI might add, dwarfs are signifigantly larger than they appear from a train.
So you won't be displaying one on your mantle, eh?
OvermodOne major use is they show routing through the switch down low, reliably next to the switch involved, without the restriction of the older 'switch lamp' on top of the stand. They involve much less confusion with block signals if they show route continuity and not track occupancy. They are MUCH less expensive than equivalent capacity on gantries, and less confusing than the doll-post system, at least to me. PRR and some others used position-light dwarfs; I believe B&O had CPL versions but I can't check from here. See some of the signal-Rule charts, as in NORAC, for more on how dwarf signals are used.
PRR and some others used position-light dwarfs; I believe B&O had CPL versions but I can't check from here.
See some of the signal-Rule charts, as in NORAC, for more on how dwarf signals are used.
B&O did in fact have dwarf CPL's. Have wanted to get my hands on one ever since CSX began replacing all the B&O CPL's - without success! B&O CPL dwarfs were capable of displaying virtually all the indications their full sized cousins were able to.
I might add, dwarfs are signifigantly larger than they appear from a train.
OvermodPRR and some others used position-light dwarfs; I believe B&O had CPL versions but I can't check from here.
One major use is they show routing through the switch down low, reliably next to the switch involved, without the restriction of the older 'switch lamp' on top of the stand. They involve much less confusion with block signals if they show route continuity and not track occupancy. They are MUCH less expensive than equivalent capacity on gantries, and less confusing than the doll-post system, at least to me.
One of the rewards of riding the Shaker Heights Rapid Transit Lines before 1975 was approaching the Cleveland Union Terminal at night and seeing and passing through what looked like a forest of dwarf signals on the tracks of the neighboring railroads. Those dwarf signals looked to me rather like tall, standing cats, of a distinctly art-noveau style. Seeing them at night, with their variously colored lenses, always struck me as very beautiful and memorable.
Who can tell me about dwarf signals? Over the years I've learned that they came in a variety of sizes and types. But what was their function? One saw (sees?) them in heavily trafficked areas, but not on the open road where signals of a larger type were employed.
So, what did dwarf signals do that standard size signals could not? When did they first appear? Were they always electrified? Does anyone have any favorites?
Our community is FREE to join. To participate you must either login or register for an account.