You are right XJQCF, the "D" is an "O". Viewing the RR from Route US-30 is not the best viewing angel. Will leave the answer at that.Thank you for the reply.
Most New England roads had flanger signs on both sides of an obstruction - One blade means lift the flanger blade, two mean OK to drop blade. Sign on right side of track in direction of train movement. Flangers remain in use, though not all lines have flanger signals.
xjqcf loco6625 I have another question on RR signage. On the BNSF line in Big Rock,IL is a rectangual white with black letters sign that reads "MDRED" this is at a long passing siding in the town limits, I believe this alignment is still in the Chicago district or maybe the Aurora sub. Are you sure that "D" isn't an "O"? There is a siding station "Mored" located not too far from the railroad's "Big Rock" siding (MP 58.0 for Mored, MP 50.2 for Big Rock).
loco6625 I have another question on RR signage. On the BNSF line in Big Rock,IL is a rectangual white with black letters sign that reads "MDRED" this is at a long passing siding in the town limits, I believe this alignment is still in the Chicago district or maybe the Aurora sub.
I have another question on RR signage. On the BNSF line in Big Rock,IL is a rectangual white with black letters sign that reads "MDRED" this is at a long passing siding in the town limits, I believe this alignment is still in the Chicago district or maybe the Aurora sub.
Are you sure that "D" isn't an "O"? There is a siding station "Mored" located not too far from the railroad's "Big Rock" siding (MP 58.0 for Mored, MP 50.2 for Big Rock).
Maybe they made the sign on a Monday.
Jeff
The "W" on the sign requires the engineer to sound the horn for the upcoming RR crossing, if not restricted by a "Quiet zone". The yellow triangle would have speed limits for passanger trains and freight trains posted starting at the sign. Or for other warnings depending on the individual RR operating rules.
Lot of Pennsylvania RR signs of various types and applications scattered through this list:
http://prr.railfan.net/standards/standards.cgi
- Paul North.
Paul_D_North_Jr Check out this collection of whistle signs: https://www.google.com/search?q=railroad+whistle+post&tbm=isch&tbo=u&source=univ&sa=X&ei=DwNOVbe6JpKXygS63IGYDw&ved=0CCsQsAQ&biw=1067&bih=494 From this "Classic Toy Trains" thread: http://cs.trains.com/ctt/f/95/p/247117/2755271.aspx#2755271 - Paul North.
Check out this collection of whistle signs:
https://www.google.com/search?q=railroad+whistle+post&tbm=isch&tbo=u&source=univ&sa=X&ei=DwNOVbe6JpKXygS63IGYDw&ved=0CCsQsAQ&biw=1067&bih=494
From this "Classic Toy Trains" thread:
http://cs.trains.com/ctt/f/95/p/247117/2755271.aspx#2755271
I di not like the IC whistleposts: they were the same size and shape as the mileposts--and I could not tell the difference between them as the sun went down, so I had to give the cord back to the engineer lest I blow for a milepost.
Johnny
tree68 Can you give us a region/railroad? Of course, it often happens that a given line changes owners via mergers/spin-offs but the signage remains from the old railroad...
Can you give us a region/railroad?
Of course, it often happens that a given line changes owners via mergers/spin-offs but the signage remains from the old railroad...
I've seen that situation in several places, along with the appropriate special instructions in the employee timetable.
One sign that I found to be interesting was the little stop sign (not 8-sided) that was posted at Brighton Park before the interlocking was installed.
For years, the Southern Railway System used a tall sign with two broad black stripes, a large black dot, and a third broad black stripe to indicate that a public crossing was ahead. However, these have been replaced on some divisions with a sign that shows the letter "W"--and the shape of the sign reminds me of the whistle posts the N&W used.
It's evidently not Union Pacific, as UP whistle-boards have an "X".So, since it's not on UP, I won't tell you that UP speed-restriction boards are downward-pointing yellow arrows with one or two speed limits on them, and that resume-speed boards are upward-pointing green arrows.
Carl
Railroader Emeritus (practiced railroading for 46 years--and in 2010 I finally got it right!)
CAACSCOCOM--I don't want to behave improperly, so I just won't behave at all. (SM)
Larry Resident Microferroequinologist (at least at my house) Everyone goes home; Safety begins with you My Opinion. Standard Disclaimers Apply. No Expiration Date Come ride the rails with me! There's one thing about humility - the moment you think you've got it, you've lost it...
Flanger sign is the most likely sign for what's being called a pennant. (Might also be a speed zone sign if the pennant is somewhat larger with a number (speed in MPH) on it.) Flanger sign means raise the plow blade, before you hit a crossing or switch with the plow skimming allong the top of tie)
No two railroads have quite the same sign standard, so it helps to know which railroad. If that diamond shaped sign has an "S" on it, you're looking at a facing point switch in about a mile.
The "whistle board" will be about a quarter mile out from the crossing. The actual appearance varies from railroad to railroad - some have a full post, some just a plate with a W, and at least one showed the appropriate signal graphically.
I've also seen a plate with "MX" meaning multiple crossings.
The pennant shaped sign may be the modern version of flanger signs. If so, they will be just a short distance from the crossing.
The W sign is a whistle post where the engineer is expected to start sounding for the approacing road crossing at grade.
I am not familiar with the yellow pennant on my carrier.
Never too old to have a happy childhood!
Our community is FREE to join. To participate you must either login or register for an account.