Conrail Truck with a Jet Engine Mounted on it?

[UPTRAIN]

na na na na na na na na JET TRUCK!!! [:D]

[Train Guy 3]

QUOTE: Originally posted by jhhtrainsplanes

QUOTE: Originally posted by Train Guy 3

Nothing like guys with a few free hours on their hands hahaha.

More

Power

Arrrr Arrrr Arrrr. [:D]

Adrian [8D]

APUs are much smaller and would still do the trick. Might be able to sneak one out a piece at a time. [;)] Yeah Right [;)] NOT [}:)]

More power.... hmmmm...... Better yet another jet engine.

[tree68]

Slightly off topic - GM had a similar rig to clear snow off some of the tracks (roads, not rails) at their Michigan proving grounds. As far as I know, the key word here is HAD.

[Anonymous]

QUOTE: Originally posted by Train Guy 3

Nothing like guys with a few free hours on their hands hahaha.

More

Power

Arrrr Arrrr Arrrr. [:D]

Adrian [8D]

APUs are much smaller and would still do the trick. Might be able to sneak one out a piece at a time. [;)] Yeah Right [;)] NOT [}:)]

[Train Guy 3]

Nothing like guys with a few free hours on their hands hahaha.

[Anonymous]

At one time KCS had one in Kansas City. Don't know if they still have it or use it. It was pretty cool to see it in action. I called it a giant Tinker Toy.

Larry

[adrianspeeder]

There was one more stupid thing we did, but i'll save that one till the statute of limitations runs out.

Jim, you got any old jet engines sitting around in the back of the shop? I got a project in mind...

Adrianspeeder

[Grinandbearit]

CN has one at Mac yard with the jet mounted on Gradall excavator . They removed the boom and put the engine in its place. It has the capability of swivelling in almost any direction, but I don't think they use it anymore. It's more of a hazard than an efficient snow and ice remover. When the machine is used, if the moisture is not completely blown away after melting, it just freezes solid again. And of course there is the problem of flying debris.

[Modelcar]

....Experimenting with propane tanks and including garden hose...!!! I would think it might be a way to take a quick trip...especially an uncontrolled one.

[Anonymous]

I found some pics of simmilar machines when I searched for snow jet on railpictures.net. Should look great on my layout, I'm just affraid it will melt my ties.

[mudchicken]

Along with being a snowblower, these rascals get used periodically to blow loess (fine dirt), grain, engine sand (for when the guy looking in the mirror does not turn the sanders off while sitting still [X-)]), grain, powdered lading, etc. out of the track structure. Air quality management people don't like it (dust), but it is effective in helping ballast be effective for a while longer and stave off the undercutter.

[TrainFreak409]

That would make on heck of a service truck. I can see it now...

CONRAIL, Quick Service is Our Business

Traveling at such velocity might cause the truck to wreck if it hit any imperfection in the track. That would point out where faulty rails are, so another jet powered rail service vehicle can ru***o the scene. [:D]

[8]TrainFreak409[8]

[Anonymous]

QUOTE: Originally posted by adrianspeeder

Yes, I have seen one of these way cool beasts. It has been talked about on the diesel truck forum i also belong to (for everything you wanted to know about ford diesels visit www.thedieselstop.com). It has been determined that the jet could be an assistance to beat any sports car. Keep in mind these trucks are heavy. Heck, mine is just a 3/4 ton pickup and it weighs over 7000 lbs. And thats a 'little' truck. It might go fast, but not airborne.

Ok, I wasn't going to share this because if you try it and kill yourself, I would feel bad. Buddy and me wanted to build something that would melt ice and snow quickly. Electric would be too slow, so fire was the answer. Ripped the blower out of an old dryer, along with the pilot light thingie from an old water heater. These were attached to a piece of steel pipe at opposite ends. Three or four coleman propane bottles were attached to the pilot light via garden hose and placed in a bookbag. A battery and a grill igniter were installed at the pilot light end to get things fired up.
Really, all we did was make a flame thrower. Worked really good till the blower shut down. (should of had a longer cord) and more fire came out next to my head then next to the ice. It was decommissioned and scrapped on the spot. We named it the 'doohickey from hell' but i think you can come up with a better name.

Adrianspeeder

OMG, you're crazy.

It sounds like something Homer Simpson would do! [:0]

[Anonymous]

LOL LOL LOL

Adrian [:)]

Experimenting with "new" ways to cut your hair huh?

Glad you are here to tell about it. Next time, just go to the barber. [;)] [8D]

[adrianspeeder]

Yes, I have seen one of these way cool beasts. It has been talked about on the diesel truck forum i also belong to (for everything you wanted to know about ford diesels visit www.thedieselstop.com). It has been determined that the jet could be an assistance to beat any sports car. Keep in mind these trucks are heavy. Heck, mine is just a 3/4 ton pickup and it weighs over 7000 lbs. And thats a 'little' truck. It might go fast, but not airborne.

Ok, I wasn't going to share this because if you try it and kill yourself, I would feel bad. Buddy and me wanted to build something that would melt ice and snow quickly. Electric would be too slow, so fire was the answer. Ripped the blower out of an old dryer, along with the pilot light thingie from an old water heater. These were attached to a piece of steel pipe at opposite ends. Three or four coleman propane bottles were attached to the pilot light via garden hose and placed in a bookbag. A battery and a grill igniter were installed at the pilot light end to get things fired up.
Really, all we did was make a flame thrower. Worked really good till the blower shut down. (should of had a longer cord) and more fire came out next to my head then next to the ice. It was decommissioned and scrapped on the spot. We named it the 'doohickey from hell' but i think you can come up with a better name.

Adrianspeeder

[edblysard]

Your assuming that they would run one of these things full throttle...
I doubt they ever need to,
In fact, it would surprise me to find them not having some type of governing device on them to prevent the engine from hitting its top rpm.

Ed

[Anonymous]

Good sceince lesson jim. I think what he meant was how do they keep the jet from lifting the truck off the tracks. ie. is it weighted or the angle of the thrust is so that the pressure is stopped by brakes. the nature of the truck, flat bottom curve top, in theory might make it possible to lift it off the ground if it was fast enough. Not enough for any real flight but it might lift of the rails a little. Maybe even go "back to the future" he he. I'm a philosophy major so this is just an educated guess from what I know about the Bernoulli principle.
Andrew

[Anonymous]

LOL LOL LOL [:D]

Yeah, but remember I almost have my A & P so I just couldn't resist. [;)] [:D]

[Anonymous]

QUOTE: Originally posted by jhhtrainsplanes

QUOTE: Originally posted by macguy

How do they keep it from taking off?

Awwww Grasshopper. [;)]

Your assignment is to look up the following words and therein find your answer.


Venturi

Bernoulli (Daniel)

Airfoil (wing)

Lift

Hint -- It is not necessary for air to pass through an enclosed tube for Bernoulli's Principle to apply. A surface that alters airflow causes a venturi effect. A majority of "lift" is created by the result of the decreased pressure above the wing rather than the increased pressure below it. The remaining "lift" is provided by the wing's lower surface as air striking the underside is deflected downward. The air that is deflected downward produces an upward "lifting" reaction (Newton's Third Law Of Motion).


To put it all in very simple terms, no airfoil, no lift, no flight. [;)] [8D] [:)]

It might fly "down" the track, but it won't fly "over" them. [:p] [:D]

(Sorry, just couldn't resist this one. [:D] )

Must you take me so literally!

When I said "take off" I was refering to it "flying" down the tracks[;)]
Not up into space.... [:)]

[Anonymous]

QUOTE: Originally posted by macguy

How do they keep it from taking off?

Awwww Grasshopper. [;)]

Your assignment is to look up the following words and therein find your answer.


Venturi

Bernoulli (Daniel)

Airfoil (wing)

Lift

Hint -- It is not necessary for air to pass through an enclosed tube for Bernoulli's Principle to apply. A surface that alters airflow causes a venturi effect. A majority of "lift" is created by the result of the decreased pressure above the wing rather than the increased pressure below it. The remaining "lift" is provided by the wing's lower surface as air striking the underside is deflected downward. The air that is deflected downward produces an upward "lifting" reaction (Newton's Third Law Of Motion).


To put it all in very simple terms, no airfoil, no lift, no flight. [;)] [8D] [:)]

It might fly "down" the track, but it won't fly "over" them. [:p] [:D]

(Sorry, just couldn't resist this one. [:D] )

[Anonymous]

This thread reminded me of the picture of the new York Central jet train. There's a pick of it in the march 2004 issue of Model Railroader on page 95. I would love to see a jet truck flying down the mainline.
Andrew Miller

[Anonymous]

How do they keep it from taking off?

Are regular truck brakes enough?

[Anonymous]

They are referred to as Sno-jets.

They do pack quite a wallop. Good at melting snow, or anything else in its way. ONce in a while one gets away and there is all sorts of scrmbling to shut it off... Nothing like having a jet without wings zipping around your yard...

LC

[cherokee woman]

Now that was a "Fluke" [:)]

(locomutt helped with this post).

[Anonymous]

QUOTE: Originally posted by edblysard

Its Snow Dragon, the jet swivles down, turns into a super snow blower and
de-icer.

Adrian, ever think about a super John Deere?[:D]

Ed

Before I came into this thread I was reading the title. I was thinking about Adrian and what a "speeder" this would make. [;)]

If he got a hold of it I guess we could call him "Adrian Super Speeder" Not sure if he would want to ride that one to the mall though. [:D] Now about that multimeter. [;)]

[locomutt]

QUOTE: Originally posted by edblysard

Its Snow Dragon, the jet swivles down, turns into a super snow blower and
de-icer.
If you ever see one running, stay away, they can throw large pieces of ballast quite a long way.

Adrian, ever think about a super John Deere?[:D]

Ed

Now THAT would be one HECK OF A LAWN TRACTOR![:)][:p]

[edblysard]

Its Snow Dragon, the jet swivles down, turns into a super snow blower and
de-icer.
If you ever see one running, stay away, they can throw large pieces of ballast quite a long way.

Adrian, ever think about a super John Deere?[:D]

Ed

[locomutt]

I'm not exactually sure,but my best guess would be
it is for melting snow from switch points
in winter.

[Anonymous]

In Linden, NJ there is a small yard operated by what remians of Conrail. It services the GM assembly plant there, along with a number of various industries.

For the past few weeks, there has been a yellow Conrail work truck parked there that has, what appears to me, an actual jet engine mounted on the rear of the truck. The truck has railroad wheels so it can hop up onto the tracks and cruise down the rails.

The rear nozzle of the engine is pointing approx 45 degrees up from horizontal. I couldn't really see if the mounting of the engine allowed it to move (up and down / back and forth) at all. There were "Warning - Jet Blast" warning stickers applied to the truck.

Can someone clue me in?

Thanks
Jim