Trains.com

Multiple Engine Question

626 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Multiple Engine Question
Posted by Anonymous on Friday, March 5, 2004 12:20 AM
Why do trains with multiple engines usually have the engines set up in a tail to tiail and nose to nose order when pulling freight?
  • Member since
    December 2001
  • From: Upper Left Coast
  • 1,796 posts
Posted by kenneo on Friday, March 5, 2004 12:47 AM
The general reason is so that the locomotive can be operated in either direction "front end first". That is the easiest and safest method. Since there is only three choices, and you have named two of them, the other is "elephant style" - all units facing forward.

Other than the rear unit be facing backward and the lead unit facing frontwards, the remaining units of the locomotive can face any direction.
Eric
  • Member since
    October 2002
  • From: US
  • 2,358 posts
Posted by csxengineer98 on Friday, March 5, 2004 3:36 AM
thats how the power buro wanted them
"I AM the higher source" Keep the wheels on steel
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, March 5, 2004 9:42 AM
Sounds good. I figured that since the wheels are driven by an electric motor, the direction wouldn't matter, but was wondering why this was the norm.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, March 5, 2004 1:15 PM
A lot of the time it also just happeneds to be whatever direction the loco is pointed in is the way it ends up traveling.

Main concern is that the front loco is facing forward, then after that it doesn't really matter.

Ideally (but not always the case) if you have loco's in groups of two it's always better that they be facing fronts away from one another; when they are asses together they can simply be detached from the train on the end of the line and they are ready to run the other direction, all you have to do is switch from one cab to the other.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, March 5, 2004 3:36 PM
Norfolk Southern is good for using the engine in whichever direction it's facing. Of course most of the older engine NS has from Southern and N&W where ment to run long hood forward (I was told it was a safety driven concept).
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, March 5, 2004 5:41 PM
QUOTE: Originally posted by kenneo

The general reason is so that the locomotive can be operated in either direction "front end first". That is the easiest and safest method. Since there is only three choices, and you have named two of them, the other is "elephant style" - all units facing forward.

Other than the rear unit be facing backward and the lead unit facing frontwards, the remaining units of the locomotive can face any direction.

Yeah baby,
I couldn't have said it better myself !!!!!!!!!!!![:D]

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

Newsletter Sign-Up

By signing up you may also receive occasional reader surveys and special offers from Trains magazine.Please view our privacy policy