Mark,
Thank you!
Now I'll have something to do when the temp in the layout room goes over 40 (Celsius) - which it will, for about the next three months.
Chuck (modeling Central Japan in September, 1964 - in the Mojave Desert in 2007)
jeffrey,Um, not for nothing, but the New Haven disappeared as an operating entity at 12:01AM, January 1st, 1969 into the Penn Central. The History Channel & the Discovery Channel were but distant dreams at that time.
There is only one NH produced film, "A Great Railroad at Work". This film was made in b&w in 1941 and released in 1942 as a war time film.
There were several advertisements made in the 1950's by the NH for view on TV, but as for films featuring the FL9? Sorry, but I don't think they were made by the NH.
There are, of course, many NH videos for sale. Some are even produced by the New Haven Railroad Historical & Technical Assocation. But even they aren't perfect.
G Paine,The Maine Eastern is a good ride (I've done it twice), and the FL9's look good up there. But FYI, they aren't B-C's, they are B-A1A's.
Paul A. Cutler III************Weather Or No Go New Haven************
marknewton - for some reason it never occured to me that sites about Japanese engines & rolling stock just might be in...Japanese - Thanks.So far (with the help of BabelFish) some of those sites are very interesting and informative. I was warned that the most modern Japanese rail freight is tanker trains, cement, steel & scrap, and containers, and looks like the 'roster shots' bear that out.
BTW, speaking of Japanese private railway EMUs triggered a very old memory of computer game time wasting in the early 1990s - namely A-Train.Idea was to build stations and transport passengers and building materials, buy land in the city, build resorts and so on. One thing that bugged me was the game presented a whole list of EMU/DMUs to chose and upgrade from, but offered no explanation of what the pros & cons were of each class - you ended up choosing blindly...Also I remember that eventually if your city got big enough the game AI would build (piece by piece) a Shinkansen line throught the city, and if you owned land next to where the AI built the station you gained a fortune (and a line of railroad conductors would appear on screen to bow to you and to each other).Finally, the reason I can't play it now is because I think they programmed the game speed by the computer system clock rate - when I played it on my 386 it worked great, but when I tried to run it on a Pentium I (yes kids, these once were cutting edge), the game went into quadrple time, running 4 or 5 times as fast - so fast you couldn't select trains or run things (and no way to slow things down either - Oops. I shudder to think what a Duo Core would do to that poor game nowadays)
Anyone wanting to get a good look at a B-C locomotive, the Maine Eastern Railroad has a pair of FL-9s that they use on their passenger runs between Brunswick and Rockland. There is a good picture on their home page:
http://www.maineeasternrailroad.com/
George In Midcoast Maine, 'bout halfway up the Rockland branch
Paul3 wrote: jeffrey,FYI, I wouldn't trust any video source for factual information that I couldn't see on the video. Most videos are filmed by railfans (not local ones at that) and not employees of either the RR or the loco manufacturer. There are several cases of mistaken ID's of locos, locations, and trains in the RR vids that I have. One of my favorites is a mispronounced city in a Pentrex video on U-Boat Survivors. They featured the Providence & Worcester RR...except they kept calling it the "Providence & War-cess-ter RR." (It's called "Woos-ter"...or, as the natives call it, "Wis-tah"). Sigh. BTW, if you want to argue about the 2450 gal., talk to EMD 50 years ago, not me. It's straight from the source. Paul A. Cutler III************Weather Or No Go New Haven************
jeffrey,FYI, I wouldn't trust any video source for factual information that I couldn't see on the video. Most videos are filmed by railfans (not local ones at that) and not employees of either the RR or the loco manufacturer. There are several cases of mistaken ID's of locos, locations, and trains in the RR vids that I have. One of my favorites is a mispronounced city in a Pentrex video on U-Boat Survivors. They featured the Providence & Worcester RR...except they kept calling it the "Providence & War-cess-ter RR." (It's called "Woos-ter"...or, as the natives call it, "Wis-tah"). Sigh.
BTW, if you want to argue about the 2450 gal., talk to EMD 50 years ago, not me. It's straight from the source.
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
Just wondering if you know of any good aggregate sites listing Japanese post WWII locomotives & rolling stock...Perhaps you have some favorite sites to share?
marknewton wrote:Speaking of JNR electrics, I picked up something a bit different the other day, an Otaki plastic kit for an EF58, in HOj! Have you ever seen these? It's obviously intended for kids, but the body moulding is rather nice. I'm thinking of using it as kitbash fodder for a Sangi Tetsudo EL.Cheers,Mark,
Thanks for the info, Mark,
My present roster includes EF58167 (brown body), plus an un-numbered, unassembled EF18 (box body 2-Co+Co-2, mechanically identical to the streamlined EF58.) Both are 1960-era TMS brass kits, powered by vertical shaft open frame motors. Eventually I'll assemble the one and modernize both, but right now layout construction on my 2-car garage filler is eating up most of my time.
Chuck (modeling Central Japan in September, 1964)
chutton01 wrote: tomikawaTT:Just wondering if you know of any good aggregate sites listing Japanese post WWII locomotives & rolling stock - Wiki does have articles on individual classes, but unlike the (rather well laid out UK loco articles) there seems to be no one 'master' listing.Also unlike UK or US railroads there seems to be rather a lack of fans sites coming up in google for Japanese Locomotives (half of which seem to refer to growth of the economy, as in 'locomotive driving GDP') and I don't have to say what 'Japanese Engines' brings up. Anyway most sites seem to be history of building the Japanese railroads, not loco or rolling stock sites.Perhaps you have some favorite sites to share?
tomikawaTT:Just wondering if you know of any good aggregate sites listing Japanese post WWII locomotives & rolling stock - Wiki does have articles on individual classes, but unlike the (rather well laid out UK loco articles) there seems to be no one 'master' listing.
Also unlike UK or US railroads there seems to be rather a lack of fans sites coming up in google for Japanese Locomotives (half of which seem to refer to growth of the economy, as in 'locomotive driving GDP') and I don't have to say what 'Japanese Engines' brings up. Anyway most sites seem to be history of building the Japanese railroads, not loco or rolling stock sites.Perhaps you have some favorite sites to share?
I, too, have noted the same problem! My very personal solution (not universally practical) is a bunch of reference books (Japanese language) collected during the 1960's, plus an ongoing subscription to Tetsudo Mokei Shumi (Japanese language, and $$$!)
There is one bright spot in an otherwise bleak landscape:
http://www.kurogane-rail.jp/eindex.html
The listing of JNR steam types includes all the standard classes in service after WWII, and there are links to photos of all but one.
9jeffrey-wimberly,While I'm not dismissing the argument about weight restrictions on the NH (the Park Avenue Viaduct was the issue) and the decision to use a 5-axle design, the original idea of the FL9 was as above (for extra water). And, looking at my actual EMD F9 Operating Manual No. 2315, 2nd edition, July 1957 "F9-0-657" (with supplement "FL9-E-1157"), it states that water capacity (for units with dynamics) for the FP9A as 1350 gal., the F9B as 1400 gal., and the FL9 as a whopping 2450 gal. I have talked to an FL9 engineers when this came up on the NH Forum, and he have told me there's no way that the FL9 as built for the NH had 2450 gal. capacity. This leads me to conclude that the EMD Manual is referring to the "as planned" FL9 water capacity.
Was the removal of over 4.5 tons of water capacity from the original FL9 design enough to drop the weight down to where it would pass over the Park Ave. Viaduct on only 4 axles? I dunno. There's still that extra 4 feet in length over an FP9, so that adds up, too. Hmm... I'm thinking they kept the 5th axle because of the room, rather than the weight of the 3rd rail gear, but I could be wrong.
Mark,Thanks for the kind words. Good point about that "L", BTW. I never thought of that. Most people just assume it's for "Long" (tho' most crews on the NH called them "effing Lousy Nines" as they could not hold a candle in performance to any loco they replaced, but especially the electrics).
marknewton wrote: coborn35 wrote:Yes, the US DID have a Bo-Co diesel. Its called an NW3.No, NW3s were B-B - they had Blomberg B trucks under both ends.
coborn35 wrote:Yes, the US DID have a Bo-Co diesel. Its called an NW3.
Im almost positive I saw a pictue of them with a B-C arrangement, becasue I remember going "Wow! Thats neat!"
Mechanical Department "No no that's fine shove that 20 pound set all around the yard... those shoes aren't hell and a half to change..."
The Missabe Road: Safety First
The PRR had a B-B-B electric. GM made and experimental C-C-C electric. UP had D-D, B-B+B-B diesels. Baldwin made several variations of 2-D+D-2 diesels. I think the TM had some 1-D diesels, possibly boxcabs IIRC. The MP had a A-1-A+3 diesel (an E6 with only one end powered, the other end was a baggage compartment).
Dave H.
Dave H. Painted side goes up. My website : wnbranch.com
What's so unusual about a B-C (Not Bo-Co, the axles are linked by gearing) DE10 class diesel-hydraulic? Or a B-2-B, DD51 class. Or any of the numerous classes of Bo-Bo-Bo electrics? It's all those other people from outside the Land of the Rising Sun who build strange stuff!!
Actually, the FL9 was not built originally for 3rd rail service...(snip)
I called it a Co-Bo (or Bo-Co) using UK/European practice in which we add the "o" for absolutely no apparent reason...
The Swiss had some weird and wacky electrics with a large "fly wheel"high above the carrying and drive wheels with a connecting rod to one (at least) of the drivers...
Which is more fun? A string of bog-standard locos or the weird odd one?
I have two of 5 axle C-Liners by TrueLine Trains in CN colours 6700 and 6701. As stated above they were used for passenger service and the reason was to support the weight of a steam generator.
Fergie
http://www.trainboard.com/railimages/showgallery.php?cat=500&ppuser=5959
If one could roll back the hands of time... They would be waiting for the next train into the future. A. H. Francey 1921-2007
I thought that an NW3 was a switcher?
Any pics of any of these weird locos?
I called it a Co-Bo (or Bo-Co) using UK/European practice in which we add the "o" for absolutely no apparent reason. I think the Europeans mainly stopped doing this.
Diesel Mechanicals [shunters at least - I vaguely recall that there were a few mainline mechanicals... LMS??? I think that these were written up as for steam as well] (almost all 0-6-0) are designated by steam practice (the others being 0-4-0). It occurs to me, diesel hydraulics (the Westerns and battleships) were designated the same as Diesel Electrics. They were seriously noisy.
We had one Class (The Peaks IIRC) that had a smaller leading unpowered single axle on each 3 (Powered) axle truck (total 4 axles). IIRC these were 1-Co-Co-1. The idea was that they took curves better at high speed. The Class was quite numerous (for the UK) but the practice wasn't adopted for any other locos.
The Swiss had some weird and wacky electrics with a large "fly wheel" high above the carrying and drive wheels with a connecting rod to one (at least) of the drivers... these seemed to last a long time.
emdgp92 wrote:The New Haven's (and later Penn Central/Conrail/Amtrak/Metro-North/et al) EMD FL9s had 5 axles--a B-B truck in the front, and an A1A truck in the rear. These could run from their diesel powerplant, but could also run as an electric via a third-rail shoe. I *think* the reason for the odd axle arrangement was to help support the additional mechanical gear.
Dave-the-Train,I don't recall any B-C diesels in the US, but, as mentioned, B-A1A's were made by both F-M (CPA24-5's) and EMD (FL9's & FL18's...well, that's what they should be called...they are after all a GP18 internally).
You also have some wacky electric wheel arrangements (like 1-B-B-1 or 1-C-1+1-C-1).
As for other odd diesels, you had Budd RDC's with their 1A-A1 wheel arrangement, or wierder yet, the "Roger Williams" New Haven RDC train set with it's AA-AA wheel arrangement. And then there's the big Alco with it's B-B-B-B arrangement, and the Baldwin Centipede (which was 2-D+D-2...I think).
Mark,Actually, the FL9 was not built originally for 3rd rail service. It was originally a "water buffalo" design made for long distance passenger trains out west, as the problem out there was not the range of the loco's fuel supply, but that they would run out of water for steam heat. According to an ex-EMD employee named Preston Cook (who gives public speeches about EMD, Alco, etc.), he discovered this fact while going through old EMD documents, and he even found and shows a technical drawing (an EMD catalog entry) showing what is described as an FL9, but with large internal water tanks both fore and aft of the prime mover and no 3rd rail gear.
It's his conclusion that EMD created the FL9 design, but had no customers for it. The New Haven came knocking in 1955 for an Electric/Diesel-Electric design, and EMD dusted off their FL9 plans, pulled the water tanks, added 3rd rail gear, and viola! A NH EDER-5 (NH's class code).
There's some debate on whether the 5th axle was really needed for Park Avenue's notoriously weak viaduct, as the 3rd rail gear isn't nearly as heavy as the large quantity of water that wasn't being carried. But it was probably just as easy to keep it than to design a while new frame. They certainly needed the room in the car body for the extra 3rd rail gear, but a 5th axle?
BTW, they also mounted 3rd rail shoes on the "B" truck, but only after they swapped out the Blomberg for a 2-axle Flexicoil.
emdgp92,I'm sure you meant that the FL9's had a "B" truck on the front, as a "B-B" truck under the front of an FL9 would be rather interesting.
Smoke,I don't think Walthers makes a 5-axle diesel. Only True Line Trains out of Canada (formally, Hobbycraft of Canada) makes CPA16-5's. They are supposed to come out with CPA24-5's later this year, but they have a long way to go judging by their pre-production shots.
loathar,About the "10 wheeler": Almost all the Whyte Classification types had a more familiar name associated with them. 4-2-0 = Bicycle, 4-4-0 = American, 2-6-0 = Mogul, etc. There is no other "name" for the 4-6-0 other than "10 Wheeler" that I know of. Not all classifications had names, like switchers for example. But for whatever reason, the 4-6-0 became the "10 Wheeler" and it's stuck.
tomikawaTT,What I've found interesting is the Euro / Japanese use of "o" to represent nose hung traction motors, while in the USA it's assumed that everything's a nose hung traction motor, so why mention it?
Loathar,
The reason a 4-6-0 is called a ten-wheeler is that a 4-4-0 was called an eight-wheeler and a 4-8-0 was called a twelve-wheeler. So, quick, what would you call a 2-8-8T? (HONK, HONK! as it blows you off the road.)
My own contribution to the world of strange is the TTT SeKi500 class 7-axle articulated coal hopper...
Chuck (modeling Central Japan in September, 1964 - with some of the locos mentioned above)
I know walthers makes a five axle diesel. Not sure of the name but has the looks of a shark.
-Smoke
A sudden crazy thought...
We had one "Co-Bo" (or Bo-Co) 5 axle diesel - that's a 3 axle truck under one end and a 2 axle the other (or the other way round depending on how you look at it) - (on the LMS IIRC). I just suddenly wondered whether there were any weird or whacky wheel arrangements in the US and (if so) why?
TIA