WOW!!! Very nice work Jeff! I'd like to see somemore pics as you complete more work. Thanks for sharing with us.
Paulie
bob the platforms are on the layout the thread is below i have a few things left to do on that corner and it should be done the layout is about 30'x30'
jeff
http://www.trains.com/trccs/forums/1132848/ShowPost.aspx
jpmorrison wrote: their are 2 tracks for loading and unloading they deadend. on one of the pictures you can see on the right side is the main line jeff
their are 2 tracks for loading and unloading they deadend. on one of the pictures you can see on the right side is the main line
Jeff,
Went thruogh all the pics again, both tracks are sidings. Once the racks are in this should be quite a great facility. Must be a fairly large layout, most couldn't affort that much real estate for an industry. Great work so far.
Modeling B&O- Chessie Bob K. www.ssmrc.org
canazar wrote: bogp40 wrote:One thing I don't see anywhere in the pics is a siding. Are you planning to load/ unload from the main? A siding would allow to spot some tank cars and give an industry for operations.I thnk he mentioned in one his other posts in the thread, he is waiting for his unloading platforms to arrive. Something I am waiting to see too. I will be surfin' the Walther's catelog today!
bogp40 wrote:One thing I don't see anywhere in the pics is a siding. Are you planning to load/ unload from the main? A siding would allow to spot some tank cars and give an industry for operations.
I thnk he mentioned in one his other posts in the thread, he is waiting for his unloading platforms to arrive. Something I am waiting to see too. I will be surfin' the Walther's catelog today!
I saw that and the reason for the space between the tracks for the platforms. But isn't those tracks the double track main. That was the reason for asking about the siding.
If you don't mind stopping on the main to service the facility, I guess it will work. My only recemmendation for a siding is to spot cars to do just that. This keeps the main clear.
i found the thread that i updated
john it is 6" pipe but it it not pvc it's just some plastic tubing we get at work that we throw away
Best Regards, Big John
Kiva Valley Railway- Freelanced road in central Arizona. Visit the link to see my MR forum thread on The Building of the Whitton Branch on the Kiva Valley Railway
jpmorrison wrote: paris i used a table saw.i just eyeballed the height at 4 1/2" jeff
paris i used a table saw.i just eyeballed the height at 4 1/2"
A chop saw is great for cutting PVC pipe. Although a table saw will work, the pipe needs to be rotated against the fence on any 10" or smaller saw. The chop saw is a bit safer than the table saw. The pipe could kickback easily if it jambs against the fence. Even though a tripple chip/ laminate blade will give the smoothest cut, you can go slow w/ a decent carbide crosscut or use a plywood blade.
jpmorrison wrote: thanks bob, the only reason there close is i ran out room LOL jeff
thanks bob, the only reason there close is i ran out room LOL
Isnt that called "selective compression?
Jeff, you did a great job. In fact, so great, you have inspired me to add my own at the back end my yard. I have been kicking the idea for along time about adding a "tank farm" but couldnt pull the trigger as to where to put it.
But seeing yours, caused me to look at my layout a bit different and gave the me the final big push.. After seeing yoru pics and thinking about all weekend I got a great spot.
I had to search for this thread. I had a question for you though, what size pipe did you use? I want to have 2 tracks like yours to add more operation options, but, like you, I have some size constraints. Yours is compressed, but is gives a "big yard " feel to it.
I saw that they are 4.5" tall... those big tanks, is that 6" pipe?
Thanks Jeff
They are exceptional. You have done a great modeling job. The only negative I would point out, having grown up in oil country, is the tanks and dikes are too close to the mainline tracks, which would not be permitted in the real world for fear a derailment would take them out, but we have to take the space we have in modeling and use it. Except for the closness, about as perfect as anyone can get.
Bob
Good looking tank farm. If you haven't already installed them, lines coming from the tanks would look realistic. Above ground or just going underground with a valve at the tank. You also could use a pump and motor somewhere (hidden?) to move product from place to place.
I am inpressed by the dikework and stairways. Looks very professional.
Keep up the Good Work!! Doc
LOST & CONFUSED, SOMEWHERE IN ONEIDA, WI.
tanks for all your comments
Looking good......... I'd like to see the final result when you get there,too.
GARRY
HEARTLAND DIVISION, CB&Q RR
EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU
Looks pretty good to me, hope to see it when it's complete.
catwalks were a pain. they were fire escapes from tichy train group
Lionel collector, stuck in an N scaler's modelling space.
A Couple things....
When I did some reno work around the house here I used a reciprocating saw to cut the plastic pipe.
What are you using to keep it square and neat ? And what scale height did you ultimately decide upon?
Looks great. I'm thinking of using a similar technique to make storage silos at a plastics plant.
Nick
Take a Ride on the Reading with the: Reading Company Technical & Historical Society http://www.readingrailroad.org/
thanks guys. yoshi the space between the tracks are for the loading platforms as soon as they come in.
i took a sheet of styrene and used model glue, trimed it flush,sanded it primed it with about 4 coats,sanding in between coats then 2 to 3 coats of flat white
how do you cap off the tops and make it look so seemless?
no there are not cast. it's 4' pipe we throw away at work