As mentioned above, McMaster-Carr is an EXCELLENT supply place for all kinds of industrial items.
In fact, you'd be amazed at how many things you could find for MRR'ing there - sheet styrene, etc. For the work I do, I order from there all the time.
www.mcmaster.com
tstage wrote: Most hardware stores will likely not have #52 drill bits. Drill bits used for cutting wood usually come in factional gauges - e.g. 1/16", 5/64", 3/32", etc. Drill bits for cutting non-wood materials usually come in fractional, letter (i.e. A, B, C, etc.) and number (#1, #2, #3, etc.) gauges. Your hobby shop might have a #52. A store that sells machining supplies will definitely have them. For online stores, check with Micro-Mark, McMaster-Carr, and/or Production Tool. Tom
Most hardware stores will likely not have #52 drill bits. Drill bits used for cutting wood usually come in factional gauges - e.g. 1/16", 5/64", 3/32", etc. Drill bits for cutting non-wood materials usually come in fractional, letter (i.e. A, B, C, etc.) and number (#1, #2, #3, etc.) gauges. Your hobby shop might have a #52. A store that sells machining supplies will definitely have them.
For online stores, check with Micro-Mark, McMaster-Carr, and/or Production Tool.
Tom
They are not at places like Home Depot and Lowes (that I have seen), but our local Ace does have them. They are locked up in a case, so you need an employee to get at them, look in the section with the other drill bits (at least here).
Jeff But it's a dry heat!
Your local machine and supply shop should also carry them. That's where I buy mine for generally a buck apiece or less.
Life is simple - eat, drink, play with trains!
Go Big Red!
PA&ERR "If you think you are doing something stupid, you're probably right!"
Harbor Freight is a good source for a lot of hobby tools.
http://www.harborfreight.com/
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
Size is 0.0635"
http://www.woodcentral.com/bparticles/DrillChart.shtml
A tiny bit over a 1/16" collett.
Do a google search, many places sell mini drill bits. (The same of riffler for jewelers files) The catch is you might be better off buying a set or an index. Individual bits are a bit tough to buy economically particularly if a site charges fixed shipping.
Karl
The mind is like a parachute. It works better when it's open. www.stremy.net
usher40351 wrote:Where can i find #52 drill bit
what size drill collet does it take.
where can i file for using hobby models.
You can find #52 drill bits at my hardware store and perhaps yours. Maybe also at your local hobby shop. Walthers will sell them to you by mail order/on line.
Collets come in different sizes depending on who manufactures them and what they're for. If you're talking about Dremel, just get the full set (of four, I believe). One of those will certainly work. These also are available from Walthers, etc.
Ed