nbrodar wrote:My favorite haunt is Lin's Junction http://www.linsjunction.com/ in Lansdale, PA. Great customer service. DCC experts. A large selection of scratchbuilding supplies, and craftsman kits. Most prices discounted 10% off list, plus an extra 5% if you're a NMRA member. And if they can find it, they will order it for you. Nick
My favorite haunt is Lin's Junction http://www.linsjunction.com/ in Lansdale, PA. Great customer service. DCC experts. A large selection of scratchbuilding supplies, and craftsman kits. Most prices discounted 10% off list, plus an extra 5% if you're a NMRA member. And if they can find it, they will order it for you.
Nick
cwclark wrote: I'm very fortunate to have a lot of hobby shops within a 50 mile radius of where i live. Larry's Hobby Shop is a good hobby shop...lots of stuff. The Houston Roundhouse has everything and the prices are lower than the competiton. Papa Ben's Train Place has everything and stuff you wouldn't think they would have. It's the best stocked LHS but a lot of the stuff is pricey. Spring Hobby Shop has a lot of stuff but it's unorganized. You'll have to dig thru boxes and boxes to find what you're looking for. There are a few more in the area but they deal with all sorts of hobbies like cars, boats, and airplanes and their train stuff inventory isn't the best. I don't bother with these sorts of hobby shops unless I need something generic like CA glue or rail joiners, stuff like that.
I'm very fortunate to have a lot of hobby shops within a 50 mile radius of where i live.
Larry's Hobby Shop is a good hobby shop...lots of stuff.
The Houston Roundhouse has everything and the prices are lower than the competiton.
Papa Ben's Train Place has everything and stuff you wouldn't think they would have. It's the best stocked LHS but a lot of the stuff is pricey.
Spring Hobby Shop has a lot of stuff but it's unorganized. You'll have to dig thru boxes and boxes to find what you're looking for.
There are a few more in the area but they deal with all sorts of hobbies like cars, boats, and airplanes and their train stuff inventory isn't the best. I don't bother with these sorts of hobby shops unless I need something generic like CA glue or rail joiners, stuff like that.
Same here. However. The guy at Spring Crossing can keep his crap!. He insulted a friend and I by telling us the last time that we were in there that because we purchased so little from him that it wasn't worth the trip... I replied that we had spent all day at all the other train shops in town and that he was the last on our list. I also told him that we had spent hundreds of dollars at the other places and were just about broke. You could see his face turn bright red with anger. Papa Ben's is a great place, and it is indeed way too pricey, but then so is everything else in that part of town... Larry's Hobbies is a good place, though not as much stuff as it use to have, and/but, old Todd is a nice and very helpful guy. My all time favorite is the Round House. I've found a number of rare items and gotten a couple of good deals there. The truth is, most of my stuff comes from ebay and web stores anymore. The older I get the less I like to travel the freeways of Houston.
Tracklayer
My LHS would be considered Caboose Hobbies but I don't go there much(about a hour's drive). I'm starting to go to Hobby Lobby alot more, especially now that thye have N scale firgures,engines,cars,buildings, and a better selection of ground foam(they also have HO scale stuff). Plus with the 40% off coupon they put out every other week the wallet stays thicker longer. The clearance section always has a good deal or two.
-dekruif
George's is the closest to me but thier selection of N scale is pitiful, under lock and key, and the boxes are misplaced half the time I've asked for something out of the cabinet. There are maybe 10 N scale structures and very little scenic details. They may be friendly but for service with N scale, not helpful. Last time I tried to bring a malfunctioning engine in for service, thier repair guy refused to look at it, he doesn't service N scale engines because he bends the frames too often.
I use Credit Valley in Mississaugua. Excellent N selection, fair prices (for a Canadian LHS), and very friendly. btw I think they have some HO too.
Local hobby shop in the Columbus, Ohio area here is Train Station. Pretty big selection in HO, which is what I'll be modelling. Hobbylands in town, one of the guys at my club works for them, though haven't been to the one's he works at on the east side of town which supposedly have a better selection of MRR stuff than the one near where I live. Problem with the Train Station is as most of you would guess: price, though they are a little below MSRP. I bought my first loco recently on sale from MB Klein (Stewart Baldwin switcher) for 1/2 off, and two loco purchases in the near future will be about the same, one from an internet store, the other on ebay. There's just no way the LHS can compete with that pricing; turns out it becomes a little irrelevant since they don't carry my line (Frisco) anyway. I have too many items to purchase in the future (rolling stock, flextrack, turnouts, etc.) not to make price the priority, and as discussed on other threads, there are enough choices in internet retailers with established reputations that I can't ignore.
Jim
grayfox1119 wrote:RAY: Now that town of Webster brought back fond memories!! My wife and I stopped at a resturant in Webster, NY on our honeymoon when I was in the Army. It was an Italian resturant as I remember, and it was right on the main highway, on the left side of the road heading East. Is it still there Ray? The CFO has been asking to go back to the Falls, so I might just stop by that place again, and of course stop at that nice LHS you recommended.
Ray Seneca Lake, Ontario, and Western R.R. (S.L.O.&W.) in HO
We'll get there sooner or later!
selector wrote:Both Vancouver and Victoria have good shops, but both are 4 hours away (including a 95 minute ferry ride to Vanc). Happily, the closest is a reasonably good one just 45 mins away, north of us, in Campbell River, called Adventure Hobby Craft.. Next closest is Liesure Time in Nanaimo, and he gets most of my business...in fact, I owe him Cdn $150 for some scenic material he shipped up to me a couple of weeks ago. I won't purchase any more locos from these guys as they want too much. But, they sure are handy for supplies.
Both Vancouver and Victoria have good shops, but both are 4 hours away (including a 95 minute ferry ride to Vanc). Happily, the closest is a reasonably good one just 45 mins away, north of us, in Campbell River, called Adventure Hobby Craft.. Next closest is Liesure Time in Nanaimo, and he gets most of my business...in fact, I owe him Cdn $150 for some scenic material he shipped up to me a couple of weeks ago.
I won't purchase any more locos from these guys as they want too much. But, they sure are handy for supplies.
I am fortunate to have Custom Railway Supply here in Colorado Springs. It is a couple of blocks from where I work (which makes every other Friday "dangerous" days). Mike and crew are very knowledgeable and always willing to help and answer questions. He has an excellent inventory, but if he doesn't have it, he will get it for you in quick order. I have been to some shops where the staff won't even lift their head to give a simple "hello", but you get just the opposite here. It doesn't matter whether you are a seasoned modeller, or just starting out, you will get the same excellent service!!
Modeling the fictional B&M Dowe, NH branch in the early 50's.
nbrodar wrote: My favorite haunt is Lin's Junction http://www.linsjunction.com/ in Lansdale, PA. Great customer service. DCC experts. A large selection of scratchbuilding supplies, and craftsman kits. Most prices discounted 10% off list, plus an extra 5% if you're a NMRA member. And if they can find it, they will order it for you. Nick
My Dad hits that place on his way home from work, haven't been but he says its good. I live in Philly and have access to a shop downtown (3rd and Market) that sells SEPTA (local commuter) decals and has a good selection of equipment though they are pricey. As is the Septa Transit museum store which carries a few sets and other models. The other LHS in Feasterville, (lower bucks county) is more in the lionel, G and S gauge business but carries some BLI and Marklin and lots of Bachmann stuff. They do consignment but even then the prices are still stiff for used.
IHC and Bachmann also have their factory HQs in NE Philly about 15 minutes from my house so getting their parts and warranty services are easy. I have a handful of Spectrum stuff plus the junky stuff from my childhood and can get parts easily. This came in handy on my Shay which was flat out replaced due to a driveline bind. It's cheaper to go to the mfg. then to send it back to the seller.
Boscov's gets some nice sets in before Christmas and carries some equipment but not much. The other shop in Bensalem looked like it closed last time I went by (Dave's Trains) mostly G and O-scale there at the time. Aside from that there are other craft stores in the vicinity for paints and scenery things.
NeO6874,Another GOOD shop is the Corner Store in Lorain..Last time I was there(3 years ago?) I stocked up on hard to find detail parts.
http://www.thecornerstore.cc/
Larry
Conductor.
Summerset Ry.
"Stay Alert, Don't get hurt Safety First!"
Rob wrote: I know this has been brought up before but what is your nearest LHS like. Mine in west Michigan is called the "Pet Palace" (if that gives you any idea of their train selection) They do have trains and scenery supplies, but it is like one of each item on the hook and it is limited. No engines, all ready to roll stock, etc... The paint they sell is all Testors enamel, not even the model master paints, it is the square glass bottle stuff. The people are so great there and they do their best for what they have. They often tell me stuff can be ordered, but unfortunately it is quicker and cheaper on line. I may buy a cheap car to detail or ballast from time to time just to support business, but not much else. There is a dedicated train shop about 45 minutes away...in the town the railroad still runs through, our line was converted to a bike trail years ago. I guess this makes us as modelers more creative and willing to try new scratchbuilding/inventing...saves some money, too. where I lived before I could go to a full blown train center at lunch from work..on payday. Dangerous combination!!! ----Rob
I know this has been brought up before but what is your nearest LHS like. Mine in west Michigan is called the "Pet Palace" (if that gives you any idea of their train selection) They do have trains and scenery supplies, but it is like one of each item on the hook and it is limited. No engines, all ready to roll stock, etc... The paint they sell is all Testors enamel, not even the model master paints, it is the square glass bottle stuff. The people are so great there and they do their best for what they have. They often tell me stuff can be ordered, but unfortunately it is quicker and cheaper on line. I may buy a cheap car to detail or ballast from time to time just to support business, but not much else. There is a dedicated train shop about 45 minutes away...in the town the railroad still runs through, our line was converted to a bike trail years ago. I guess this makes us as modelers more creative and willing to try new scratchbuilding/inventing...saves some money, too. where I lived before I could go to a full blown train center at lunch from work..on payday. Dangerous combination!!! ----Rob
DO YOU KNOW HOW DESPARATE I AM FOR EVEN THAT RIGHT NOW!!!!????
I have to travel 95 miles to casper to Hobby Lobby for the same general arrangment. I consider my LHS the Walthers Catalog.
James
My LHS is The Model Railroad Shop only a few miles away in Piscataway, NJ, and may be the oldest one in the country. My Dad's oldest brother, who died before I was born, shopped there in the 30's & 40's. It's 99% trains, and mostly HO, but they have the other scales as well. They're crammed to the rafters with just about anything you're looking for. Good NWSL parts selection.
http://www.themodelrailroadshop.com/
I usually buy something when I'm there, but a lot of us just hang around and shoot the breeze. There's another store a little further away in Somerville, which I'll have to scope out one of these days. Several smaller stores in local towns have gone out of business in recent years.
Nelson
Ex-Southern 385 Being Hoisted
tstage wrote:I have four (4) in my area and they are all about equal distance from me (30 min.), in opposite directions:Depot Train & Hobby (Cleveland) - Decent selection, Forte: Knowledge-baseWings Hobby (Lakewood) - Good selection, Forte: Scratch-building supplies, huge selection of reference booksStewart's Hobby (Willoughby) - Good selection: Forte: Tons of Branchline kitsHobbytown USA (Mentor) - Huge, Forte: Scratch-building suppliesWe also have a Michael's about 20 min. away and I'm learning just how beneficial they are to supplies and ideas.Tom
-Dan
Builder of Bowser steam! Railimages Site
Take a Ride on the Reading with the: Reading Company Technical & Historical Society http://www.readingrailroad.org/
Here is mine, P & D Hobby Shop: http://www.pdhobbyshop.com/ They are the best in the area and will special order anything. I have been going there for close to 20yrs. Great selection of BB kits.
The LHSs near me:
Slot & Wing Hobbies (Champaign) : They specialize in RC Cars & Airplanes. Most of the stuff is used, and dent-scratch. They do carry Atlas, Bachman, and Proto 2000.
Joes Hobby Barn (Terre Haute, IN) : RC car central here. Though the have a good selection of blue box kits.
Thats it for around here, except for a few shows.
MisterBeasley wrote: I'm lucky to have a first-class LHS within bicycling distance, although I seldom ride there. (It's hard to put a piece of flex track in the pocket of those Lycra pants, after all.) The shop is all trains now, but under the previous owners, it was half trains, half dog-grooming supplies, so I feel your pain. Now, though, the shop is mostly HO, with a small amount of N and even a bit of O here and there. Gerry will order anything, which is great when I need some small item from the Walthers catalog, and don't want to pay the shipping charges. He does decoder installations for the techno-challenged, and there's an 8x8 foot in-store layout for demos, testing and just plain playing with trains.
I'm lucky to have a first-class LHS within bicycling distance, although I seldom ride there. (It's hard to put a piece of flex track in the pocket of those Lycra pants, after all.) The shop is all trains now, but under the previous owners, it was half trains, half dog-grooming supplies, so I feel your pain. Now, though, the shop is mostly HO, with a small amount of N and even a bit of O here and there. Gerry will order anything, which is great when I need some small item from the Walthers catalog, and don't want to pay the shipping charges. He does decoder installations for the techno-challenged, and there's an 8x8 foot in-store layout for demos, testing and just plain playing with trains.
Bicycling from Bedford? It must be a rather treacherous ride up Route 4, with a couple of killer hills along both ways! No wonder you seldom ride there.
I’ll second Maine Trains, and include Hobby Emporium in Tyngsboro (both HO and a lot of N) and Kens Trains in Sudbury (Exclusively N-scale).