ken
I have bought alot of stuff of ebay and enjoy it very much. I have got the od piece of junk, but I have learned to repaire then and make them work. Alot of my cars are tyco and bachmann and they stay on the track just fine. I have bought some athern ready to roll cars and have hade a couple that would not stay on the track because the wheels were to far apart and the couplers where not the proper height.
Anothe thing you said you where looking for was an old dutch car. post a picture of it If it is the one I'm thinking I have a freind who hade one and Ill see if he still has it.
Ill post a few pictures of my colection
Now I just need to design something to hold them all.
I am sure you know I was kidding. New spur is in places, right around 13 feet that should hold some cars. It is on the B line, but a turn out will let me take cars to the A line.
Ken
I hate Rust
cudaken wrote: "Nice videos by the way"? Milwhiawatha are you making fun of me Man they blow chunks. Having a ball, getting ready to add a big spur so I can start parking some of the stuff. Have around 87 rolling stock up and running. http://s83.photobucket.com/albums/j284/cudaken/?action=view¤t=good-1.flv That is a old video I made for my self. Hump that is in the video is gone. Still have a few to go, but board did start as a slot car board. They did not care I was not Bob Villa. Hum, This Old Train Bench, I bet someone would watch it! Cuda Ken
"Nice videos by the way"? Milwhiawatha are you making fun of me Man they blow chunks.
Having a ball, getting ready to add a big spur so I can start parking some of the stuff. Have around 87 rolling stock up and running.
http://s83.photobucket.com/albums/j284/cudaken/?action=view¤t=good-1.flv
That is a old video I made for my self. Hump that is in the video is gone. Still have a few to go, but board did start as a slot car board. They did not care I was not Bob Villa. Hum, This Old Train Bench, I bet someone would watch it!
Cuda Ken
Cuda Ken, I would never make fun of anybody thats not who I, am. They prove the people who say you buy junk wrong and to me that smakes your videos Nice lol.
Adding a spur thats great I havent done much on the layout been reworking a building I screwed up on in other words painted badly cleaned them (acrylic paints thank the model gods). I primed it grey and repainted it white. if you guess White Castle by Walthers your right. Now I hope I can find the roof, then cut the glass out of clear plastic.
Cudaken, you know what I dotn think your doing bad at all. These locomotives run great andpull nicely and will run as long as they can if you keep them mantained. I think its great to see someone in the hobby to keep it going and I personally dont care what you can and cant afford cause that is what this great hobby is about. Does buying lifelike and bachmann standard make you less of a modeler?
What seperates you from the modelers who buy expensive locomotives, but buys Model power and Bachmann buildsings nothing should we say aha your cheap or something on that line? No so I wish people woulfd stop saying you buy junk and that cause atleast your supporting the hobby and dang it you enjoy it.
I see keep buying the stuff off of ebay atleast if it accidently hits the floor or does fry out like many of mine have done you dont say a few curse words and be out of 100 or so dollars for one locomotive.
Welcome To The Hobby, hope you stay awhile, keep up the good work.
Nice videos by the way.
Darth Santa Fe wrote:I did. It's definately not a great runner, but it was only $5. If you know me, I can't pass up an offer like that. And the guy threw in 2 free boxcars to go with it! I've since painted a better UP gray over the old light gray, added grab irons, added weight, strengthened the motor a little, changed it to front wheel drive, added a front pilot, put in a new rear light bulb, cleaned and oiled it, cut the fuel tank off the shell and put it on the frame, and added knuckle couplers.
I've since painted a better UP gray over the old light gray, added grab irons, added weight, strengthened the motor a little, changed it to front wheel drive, added a front pilot, put in a new rear light bulb, cleaned and oiled it, cut the fuel tank off the shell and put it on the frame, and added knuckle couplers.
Why didn't you just rebuild it while you were at it!
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
cudaken,
Whoops! Sorry, I forgot all about sending you my address again. I'll try and get to that soon.
Agamemnon wrote: Hey, and at least you didn't buy a Bachmann DD-40X...
Hey, and at least you didn't buy a Bachmann DD-40X...
I did. It's definately not a great runner, but it was only $5. If you know me, I can't pass up an offer like that. And the guy threw in 2 free boxcars to go with it!
_________________________________________________________________
As I read this thread and others on the forum, I keep in mind some words of wisdom from an old wise man.
The fool chatters while the wise man listens.
After all that drama, I'm afraid to comment, but here's my two cents.
There's something to be said for quantity, especially in cars. Personally, if I had my druthers, I'd have 50 Lima boxcars than 15 Fleischmann. That's what weathering is for, after all, and since I also build model tanks and wargaming stuff, I have all the paints, knives, sheet styrene and gubbinz required.
As for "questionable" purchases, we all make a few on occasion. I just placed a bid for a Fleischmann set with a dodgy loco that the seller estimates is around 20 years old. If I can get it to run reliably, great, if not, no big loss.
Darth, I have not messed with it yet, will be in a few days. Main thing I have been working on is beefing up the POS board I have as now. It is much better now but still will be repalced.
Mr Gibson, I am about ready to sell my Less Paul and buy a Stratacaster. You seem to have a slective memory. My first posting was not "Wasn't your first post expressing disappointment in the hobby" No was where newbies weclomed on this site? Guess you did not answer that posting.
" (Oct 01) stated you couln't get 4 loops out of 45 cars your RR without derailing. True? Yes it was, that was found and fixed. Tonight around 100, or what ever thay made in 4 hours.
" In between: you had (1) some engine combinations pulling 2 amps? 4 amps?, (2)burning out one power pack, (3) use of inadequate wiring, (4) buying - then sending a messed-up purchase to someone else (Darth Santa Fe) to fix?"
MRC 6200 was bad NIB (selective menory again) K-10 train where it came from had it shut down while runing a Kato and a 40 car load. He tested it before he sent it back. MRC 9500 with no changes to the board working great and no over loads.
2 amp load was with 4 Blue Box and a 60 car train.
Wiring, well I am new got to start some where. That is past but seems you like to dewell on the past.
As far as the Dash 8, in some regaurd it was a great buy. Club that listed it gave me 100 % of the money back. With it being over my head Darth took it on and said "he injoyed working on it", plus from what he found wrong and told me about I was able tofixed yet another engine. Darth has yet to send me his address again so I can pay the shipping back to me but total will be less than $12.00. A good dummy engine is more than that.
Don, you have helped me a lot, I will give you that. All so thank you for not taking the cheap shoots at my spelling, it blows. I should have never listed your name as well, but the last posting you answered got me p-ssed off so I started this one.
I know your skills are way better than mine, that is a given. Plus at this point pockets are deeper as well. But you should be able to admit for what I have spent and short time in this hobby I am not doing that bad.
More than likely you and I will never see eye to eye. That is fine, I do it my way and you do it your way. If you happen to see a posting I have made and you know the answer feel free to answer. More than likely next big question will be in the up coming bench.
I will not get in a fight on this board, if I want to fight I will tell my wife what I have spent today on the train's. Bottom line I am having fun, no brass and not that much class but having fun, that is the bottom line.
Cuda Ken, your friend but you don't know it.
"A smart man knows what he can do and what he cannot do".
Sounds to me like you're doing pretty well. I think you had more cars running in those videos then I even own, and they're all staying on the track! Some of my cars will derail just from pulling too many more behind them (probably the ones with talgo couplers).
By the way, have you got the DASH running yet? If so, is it much better than when you bought it?
IF I steal , why not steal from the best?
Don Gibson wrote:quote user="cudaken" Never have so many, spent so much time, on so many posts, advising any single person, in my 2 years on this forum. Maybe you have set a new record? Maybe not. (Not important) - still you are Derailing and Complaining. Perhaps you should consider a name change to 'D&C-Ken', or at least 'Circular'-Ken. Forget I said that - (I want to keep it nice).
Never have so many, spent so much time, on so many posts, advising any single person, in my 2 years on this forum. Maybe you have set a new record? Maybe not. (Not important) - still you are Derailing and Complaining. Perhaps you should consider a name change to 'D&C-Ken', or at least 'Circular'-Ken. Forget I said that - (I want to keep it nice).
LOL...You guys are killing me .....stop it
"Never in the field of model railroading was so much owed by so many to so few" Winston Churchill
(or something like that)
Cudaken,
Might I make a suggestion? Now that you have enough trains to keep you busy playing, you might want to take a break from buying. Take a break until you have a better idea of what you're trying to do. Most satisfying model railroads have a theme. I don't mean you have to do what I do (I model a specific month, year, division, railroad - i.e., July 1956 Middle Division, Pennsylvania Railroad), but some sort of theme will help you focus your purchases and efforts.
Think about an era (present day, 1960s, whatever) and/or and area (desert southwest, northeast, your hometown, etc.) you want to represent. Then, using the Internet or books, you can do a little research (trust me, this is WAY MORE FUN than it sounds) to get an idea of what railroads and their surroundings look(ed) like when and/or where you're thinking of modeling.
I know that sounds limiting, but quite the opposite is true. You'll find you're looking for specific cars and locomotives rather than waiting for some random engine that shows up an eBay. That way you can control your hobby dollar a bit better and focus your efforts. That's really where you make the breakout from "newbie" to old hat.
Just a kind suggestion!
Modeling the Rio Grande Southern First District circa 1938-1946 in HOn3.
"Someone here keeps blowing me caboose about the cheap stuff I bought of E-bay. I will not mention Mr Gibson name so he will not get nasty with me.- C-Ken":
Kenny: Well lets see now:
Wasn't your first post expressing disappointment in the hobby - something to the effect "I'm done" (quit), 'derailments', 'cars coming apart', even "throwing things against the wall'. That was 'how many months ago'??
A more recent post (Oct 01) stated you couln't get 4 loops out of 45 cars your RR without derailing. True?
In between: you had (1) some engine combinations pulling 2 amps? 4 amps?, (2)burning out one power pack, (3) use of inadequate wiring, (4) buying - then sending a messed-up purchase to someone else (Darth Santa Fe) to fix?
You recived help and guidance on all of them. Some said you had bought junk. You used the word "cheap"if I remember correctly'. My word was "drek", so you are not quoting me.
Anyone curious enough to pull up my Oct 04 post to you is welcome, and to repost same.
Never have so many, spent so much time, on so many posts, advising any single person, in my 2 years on this forum. Maybe you have set a new record? Maybe not. (Not important) - still you are Derailing and Complaining. Perhaps you should consider a name change to 'D&C-Ken', or at least 'Circular'-Ken. Forget I said that - I want to keep it nice.
It seems to me when people keep making the same mistakes. and making the same complaints, something is very wrong (Opinion). However I too have learned & shall not repeat the error of my ways.
"Yes, I made mistaked buying ... But yet I still have someone that blows me caboose about the cheap stuff I run? ... So folks, have I learend and got better or just wasted my money?? - Cuda Ken
Or all 3. Might make an interesting POLL?
So 'Sayonara'!
Colvinbackshop, did not see the PM so I sent one to you.
On my current board, yep it is big and bad, badly made that is. But that will be changing a little at a time. K-10 train is going to be helping me with my lack of wood working tools. He will make the cuts and plane the wood for me so it will be straight and squear.
Larry that does not post to much sent me a link of a bench that I starting to like more and more.
Left side will use the U shaped board I have in places as of now. Center and right side will be all new bench. It will be made in between 36" X 48" and 24" X 48" sections. Left side will be around 19 feet long and center will be 12 to 14 feet long. Have around 154 feet of lumber so far, as soon as K-10 trains has his wood working shop cleared out I will be hauling it down so I can start the sections.
On the cheap old used Athearns, with the MRC 9500 I have now they are a blast to run. Last night was the first time I ran the Protos in 2 weeks. I seem to like the old Athearns a little better for now. Soft hum of the motor's seem to added a little to the ambience.
cuda thats some setup looks awsome your fillin that garage up
great work looks like a mad friday at the rail yard
setup more photo ops
cudaken wrote: If you don't mind when I am done with it I like to PM you a guide to proof read on mistakes I have made and how to fix them before I post it. It should help people that are new to this hobby like me. Cuda Ken
If you don't mind when I am done with it I like to PM you a guide to proof read on mistakes I have made and how to fix them before I post it. It should help people that are new to this hobby like me.
Ken, I would be happy to do it. Just send it when you are ready. I'll send you a PM with my email address so you can attach it.
-Crandell
BXCARMIKE, yep the only thing going on E-bay is the stuff (ckeap Like Like engines) that I will never use again.
Selector, you have been very helpful through this jourany. All wise a kind word and help me keep my chin up. Guess the reason I have taken the time to learn how to fix them is the trash can's where alwise full! Well, there where just so many, seemed a waste to throw them away. Tuning the trucks on the targo (couplers on the truck) is the hard part. Bosters behinde the couplers are tight as heck. I have learned a trick about cleaning them up to take either Walters or Proto wheels. I have runied around 12 sets, working on a way to fix them as well.
Guess it is the Hot Rodder in many that keeps me from giving up on junk, or making some that is broken and work well.
Excpet for the TYCO Old Dutch Hoppers I won and stilling looking for more of I am going to stick with Athearns BB kits for now on. Have a pair of Round House 40 Box cars that I have yet to bulid, if I like them maybe some round house stuff.
Thanks for all the support folks, still wondering when I am going to get the nasty gram?
Ken, congratulations, you've passed the gonna sell this stuff mood from this past summer, and you seem to be enjoying yourself. That's why we take up this hobby, but remember when you post on the forum you're going to get both kudos and criticism. It's part of how and why there's a forum.
As for you get what you paid for, not always, you have to know what you want and a given price, found some decent deals at trainshows at rock bottom prices.
jfugate wrote:The main thing with ebay is to watch the price while bidding. I was thinking of bidding on some etched brass pieces that had gotten up to $15 (and I would have to bid more to win) but before I bid, I googled the item.Once I found out you could get this same item for $14 at some of the better online hobby shops, I was no longer interested in bidding! It finally sold on ebay for $15.75 or so -- heck of a deal. Moral of the story, do your homework before bidding on an ebay item!
Joe,Absolutely! I found the BETTER DEALS of late comes from on line hobby shops..
One has to watch his/her prices and bids least they end up buying more then the item sells for even at full MSRP..
Larry
Conductor.
Summerset Ry.
"Stay Alert, Don't get hurt Safety First!"