Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Peco Electrofrog turnouts - HO vs N contact

1309 views
1 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Peco Electrofrog turnouts - HO vs N contact
Posted by Anonymous on Thursday, August 28, 2003 9:53 AM
I use N scale Peco electrofrog turnouts, the points are notoriously poor for electrical contact to the stock rails once dirt sets in and need an auxiliary set of linked contacts to power the frog reliably, such as a microswitch or turnout motor contacts under the table.

In the LHS the other day I was looking at some Peco HO scale electrofrog turnouts and noticed there were additional contacts mounted on the underside of the points that slide under the stock rails. These contacts are not present on the N scale turnouts.

Can anyone comment on how well these HO contacts work? Does the frog need additional contacts for power switching or are the built-in contacts reliable enough even when they accumulate dirt?
  • Member since
    April 2003
  • 305,205 posts
Peco Electrofrog turnouts - HO vs N contact
Posted by Anonymous on Thursday, August 28, 2003 9:53 AM
I use N scale Peco electrofrog turnouts, the points are notoriously poor for electrical contact to the stock rails once dirt sets in and need an auxiliary set of linked contacts to power the frog reliably, such as a microswitch or turnout motor contacts under the table.

In the LHS the other day I was looking at some Peco HO scale electrofrog turnouts and noticed there were additional contacts mounted on the underside of the points that slide under the stock rails. These contacts are not present on the N scale turnouts.

Can anyone comment on how well these HO contacts work? Does the frog need additional contacts for power switching or are the built-in contacts reliable enough even when they accumulate dirt?
  • Member since
    September 2002
  • From: NZ
  • 242 posts
Posted by Gunneral on Thursday, August 28, 2003 5:05 PM
The original N electrofrog turnouts used to have these extra contacts, circa early 70`s. Try a thin coat of Peco Electrolube on the inner surface of the rails` where they contact each other, this seems to keep good electrical contact over a long period of time!
  • Member since
    September 2002
  • From: NZ
  • 242 posts
Posted by Gunneral on Thursday, August 28, 2003 5:05 PM
The original N electrofrog turnouts used to have these extra contacts, circa early 70`s. Try a thin coat of Peco Electrolube on the inner surface of the rails` where they contact each other, this seems to keep good electrical contact over a long period of time!

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!