looking for the correct red paint

[Anonymous]

I've got gray primer. That would cover nicely.

[loathar]

I had the same problem trying to match some CP Rail red on some old Athearn GP's.
Wasted a bunch of money on hobby. paints. You may want to try an autoparts store. They usually have a good selection of Duplicolor or similar paint in spray cans.(just a thought) I found some $1 a can red primer that was a really good match for my GP.
I've also gone to Home Depot with a car or loco and had them put it in their paint matching thingy and mix me a quart of enamel, but I used that in my airbrush.

[Anonymous]

Yep, that's the sequence.

As far as priming goes, as long as the primer is plastic-friendly and the right color, you should be OK.

When I prime a loco shell for painting, I usually use a neutral color like light grey, which most colors can cover easily without having to use a thick coat. I don't like using orange-colored primers like Zinc Chromate because some colors have a hard time covering that. I also don't like using primers with fillers in it, which goes on thick and can obscure molded details.

Hope this helps.

[Anonymous]

so- prime, paint, gloss, decals, dullcote? Please let me know so I can order my paint in a week or 2. Can i use regular primer? (the stuff for metal, ect- stuff you get at the hardware store) i've got a bunch of that I'd like to use.

[Anonymous]

QUOTE: Can't convince you to get an airbrush hm?

I want an airbrush. Bad. But I don't have the money right now. Structures and rolling stock are high on my priority list now.

Russell, thanks for that link.

[Trainnut484]

Dingoix,
hope this link helps. It leads to some CGW topics:

http://index.mrmag.com/tm.exe?opt=S&sort=D&output=3&cmdtext=%22CGW%22


Russell

[Anonymous]

QUOTE: Originally posted by dingoix

is this what I need for gloss? http://www.testors.com/catalog_item.asp?itemNbr=820

so I'd prime, paint , gloss ,and then decals? Sounds easy enough.

Yup yup...

Just add one more step at the very end: After the decals have dried, seal it up with either another coat of gloss or flat finish (such as Testor's Dullcote).

Can't convince you to get an airbrush hm? [|)] Personally I think it's a lot easier to lay down a thin, even coat with an airbrush, and you can actually mix and adjust your shade of paint before you spray.

Good luck!

[Anonymous]

is this what I need for gloss? http://www.testors.com/catalog_item.asp?itemNbr=820

so I'd prime, paint , gloss ,and then decals? Sounds easy enough.



Thanks

[Anonymous]

QUOTE: Originally posted by dingoix

Why would i need "gloss"?

Decals will NOT blend in well if the surface you are applying it onto is matte/rough. It has to be enamel-smooth and glossy for decals to blend in properly.

If you apply a decal onto a rough/matte surface, it will dry out with a silverish appearance.

[Anonymous]

I'm going to primer it to hide where I *ruined* it. I actually tried to scrape off some paint when it was wet and I determined it wouldn't work. The shell looks like crap now. Santa Fe warbonnet w/ some red covering various areas. I can order the paint, get this primed and by the time i get my paint it'll be dry.

[Anonymous]

Why would i need "gloss"?

[modelmaker51]

I would imagine that caboose red is probably a pretty close match. Floquil paints are laquer paints, so you will have to be careful if you're painting a plastic body. I would recommend a light grey or white primer as red does not cover very well. Make sure the primer is thoroughly dry, (several days), before spraying the red. Then spray on the red in several thin coats. Floquil is flat/matte so you will need a couple of coats of gloss before decalling.

Isn't model railroading fun!

[Anonymous]

thanks, I'm sorry I didn't look hard enough- would this work? http://www.testors.com/catalog_item.asp?itemNbr=150 I'm curious what color it actually is.

dingoix

[Anonymous]

I found this, but I don't think it's what I'm looking for http://www.testors.com/catalog_item.asp?itemNbr=1552

[Anonymous]

Thanks- what type of paint do I want- acrylic ,enamel or lacquer- but I can't find spray paint on their site.

[Anonymous]

Dingoix you might try Testors.com on their website they have several railroad colors in spray and bottles this might help, good luck. you might look at the model car colors in spray cans testors has some new colors several reds.

[Anonymous]

What manufacturer has any kind of red spray paint for models? Please post a link.

[GN-Rick]

Very hard to match color from a photo. The problems are, what filters may have
been used? (alters perceived shade), age or deterioration of photographic materials,
Lighting, exposure all play roles in what is seen in a photo. I've been burned on
this issue many times trying to match oranges and greens. Is there any way you can obtain a paint chip? That's your best option, if possible. Of course, even paint
changes with age. Good luck.

[Texas Zepher]

Red is the hardest color to match. There are so many variations. Which red did you use. I thought Chicago Great Western was a standard red (like red #25), but the picture you pointed to looks a little like tomato red (orange hint).

[Anonymous]

I *ruined* a FP7 w/ some red that wasn't CGW. I need the correct red. Here's the color Chicago Great Western GP30 It has to be spray paint- I don't have an airbrush. I got my CGW decals today and it doesn't list what the red color is. If I can't get the exact what's a close match?

Thanks a bunch[;)][;)]



dingoix