Login
or
Register
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Home
»
Model Railroader
»
Forums
»
General Discussion (Model Railroader)
»
Wiring capacitors to power turnouts
Wiring capacitors to power turnouts
2031 views
6 replies
Order Ascending
Order Descending
wacowally
Member since
October 2002
From: US
8 posts
Posted by
wacowally
on Monday, April 21, 2003 8:54 PM
Thanks for the help. Removed some resistance from the circuit and it works fine now. Started new layout after 20 years and had 35 snap switches packed away in boxes, so will stay with them for a while. Wally
Reply
Sperandeo
Member since
January 2001
From: US
1,300 posts
Posted by
Sperandeo
on Monday, April 21, 2003 9:57 AM
David Brampton is right, you don't want to use a capacitor-discharge power supply with motor-drive switch motors. If you're still using solenoid switch machine, though, the C-D supply remains a good method. Circuitron and Miniatronics both sell assembled C-D circuits at reasonable prices.
So long,
Andy
Andy Sperandeo
MODEL RAILROADER Magazine
Andy Sperandeo MODEL RAILROADER Magazine
Reply
wacowally
Member since
October 2002
From: US
8 posts
Posted by
wacowally
on Monday, April 21, 2003 7:40 AM
I'll give it a try. I had about 40 snap switches when I unpacked everything this year so that's what I am using. Thanks, Wally
Reply
wacowally
Member since
October 2002
From: US
8 posts
Posted by
wacowally
on Monday, April 21, 2003 7:37 AM
No. When I restarted I had boxes of equipment, so I am still using snap switches. Thanks, Wally
Reply
BR60103
Member since
January 2001
From: Guelph, Ont.
1,476 posts
Posted by
BR60103
on Sunday, April 20, 2003 10:44 PM
I don't think capacitor units can be used with motor drives.
Have you checked polarity? Capacitor discharges are directional and the diode matrix is also directional; if you wire one backwards, nothing will happen.
Try wiring up a single switch machine and run the two control wires out. Hook the common to the common from the CD unit. Take the other wire from the CD unit and wrap it around one end of a diode. Touch the other end to the wires on the switch machine to see if it flips. If it doesn't, turn the diode around. This will tell you which way to hook up the diode matrix. Oh, test it without the diode first!
--David
--David
Reply
Anonymous
Member since
April 2003
305,205 posts
Posted by
Anonymous
on Sunday, April 20, 2003 10:35 PM
When we used snappers or solenoid operated switches, the capacitor dumped a sharp current spike and the swiches could move together. I suspect that you are now using motor drives and the capacitor sees more reactance when you throw trhe switch. As the motors move, the capacitor recharges and you do not see it "shorted."
Reply
Edit
wacowally
Member since
October 2002
From: US
8 posts
Wiring capacitors to power turnouts
Posted by
wacowally
on Sunday, April 20, 2003 5:39 PM
In the early 80's I used capacitors to power my switches when controlling multiple switches with one button. (MATRIX) I have recently finished wiring a new layout and can't remember how to wire the circuit. I used directions from PRACTICAL ELECTRONIC PROJECTS FOR MODEL RAILROADERS, Switch Machine Contols, but I find that the capacitor is not discharging when I push button. If I disconnect all wires from the capacitor and short both leads it does discharge. This system worked for me 20 years ago but can not make it work today. Any help out there?
Reply
Subscriber & Member Login
Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!
Login
Register
Users Online
There are no community member online
Search the Community
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter
See all
Sign up for our FREE e-newsletter
and get model railroad news in your inbox!
Sign up