Cool Tools--What's in your Box

[SpaceMouse]

Okay, I'll bite.

What's a Phrepicator? I'm not going to get the crap beat out of me if I talk about it in West Texas am I?

[Anonymous]

I have a very old "Boot Jack Phrepicator" from the 1950s that my dad bought for me at a hobby shop on 78th and Portland in Bloomington, MN. A few years ago I found a brand new "Phrepicator" in a hardware store up here in Northern Minnesota. The new one was made by Tools, INC. My old one was made by Boot Jack Inc. of Champaign IL. I can tell you the new one does not measure up to the old. I can't believe the quality of the old one, it just keeps going and going! By the way it was not new, when my dad bought it for me, so I have no idea how old it really is. These items are very difficult to find now-a-days! However, if you need to phrepicate, you need one of these (and who doesn't need to phrepicate, if you are a model railroader)? I'm not sure if Micro-Mark still carries these or not. I would suggets tool flea markets as your best bet.

[Anonymous]

My favorite is the drill press attachment for my dremel motor tool. I can't tell you how many times I have used this pup. Works real good for drilling into metal coupler mount pads. Try getting them verticle by hand!

[jimrice4449]

I've got 2, one comercially available but modified and the other which is an original design and my favorite,
No 1 is a pin vise chuck with a base that fits into an electric screwdriver. Nice slow speed high torque tool but it drove me nuts when I'd fini***he hole and the chuck would stay in the work and have to be replaced in the screwdriver. Solution...drilled and tapped a #10 hole in the screwdriver bit holder and now have a thumb screw to keep the little bugger in place. Micr Mark has the pin vise chuck but you're on your own for the drilled and tapped hole.
No 2 is the world's greatest MRR painting tool. I paint multi-color jobs by doing the first coat in the striping color and masking the striping pattern, doing the fist color coat, masking it and so on pulling all the masking tape off when the final color is done, kind of like opening a long anticipated present. I used to use Chart Pack tape in various widrhs but figured out a better way. When I presented my idea to an amateur machinist friend he agreed to do it for free just to see if he could. I got a piece of 2"X1/2" steel bar stock and he machined a slot in each corner the thickness of two pieces of masking tape deep and 1 2 and 3 scale inches wide and the fourth corner the width of the space between the horizontal strips on Athearn's F-7. What I do now is lay 2 strips of masking tape on a sheet of glass, cut a reference line with a straight edge and razor blade, press my stripe jig against the tape and with a single swipe of the razor blade I have 18 inchs of 1'" (or 2" or 3") HO masking tape. Slicker 'n snot!

[TurboOne]

The most valuable tool, the second set of anything. That way when you've lost the first one, you can keep working. Then when the hogwarts magicians let you find that first tool, put the second one back. Ready for the next time.

Tim

[Anonymous]

MIG Welder, not really applicable in this hobby, but it is a cool tool to have.

Bob

[Anonymous]

I made my own grass planting tool by cutting a slot in a flat tip jewelers screwdriver.
3 seconds with a Dremel and your done, make several for different size grass "clumps".
I recently got a $15 sprue nipper and it works good, but my old standby fingernail clippers are just as good for $1.79...also I once borrowed/stole these little cuticle cutter things from my wife; they look like small diagonal pliers. If you feel brave give that a try.

[jwar]

For HO track the Xuron "xuro shear #2175", great cuts, seldom a bur. the channel lock #736 shot needle nose #337 dykes, for those that nail track and cork. Riffler files, they are the same as a jewlers file but have a nice curved end, usfull to touch up sodered track joints.

For reworking cars, a small book case tye shelf on the back of my bench, hold tool, medicine bottles of misc parts used often. The top of the shelf is at eye level to see the coupler height. A uncoupler under the top shelf rail to check actual coupler action, finger flicking dont get it and of cours a rerailer on each ent to set cars on it.

My latest is my dual action internal mix air brush, and now is my favorite of all

[Bikerdad]

Very handy tool courtesy of woodworking: a Veritas Scraper jig. It holds a full size flat file at exactly 90 degrees, exceptionally useful for squaring the ends of DPM walls...

[Anonymous]

I use numerouse types of tweezers on a regular basis, some with a fine smooth tip, some with a grip type tip and various angled and curved. I also have one that is great for holding small wire, has a circle shape in the center when closed and holds wire rails and grabhandles, etc. Some you can get from MicroMark and some others I collected over the years when I worked at a hospital supply co. They would throw out any that weren't "flawless", so lots went into the trash and into my toolbin.

[grayfox1119]

As I am getting back into a hobby that I left many years ago, I needed many things. Last week at the big train show in Springfield, I bought many items that both I, and what others on this forum, as well as MRR magazines, said we should have. Micro screw drivers, files, pin vise, larger multi hand vise,clamps, soldering iron, nnedle nose plyers, cutters, rail cutter,, just for starters. And, what we all seem to forget, what do we put all these into rather than all over the bench? A good toolbox. Sears had a great sale on tool boxes of every imaginable shape and size. I bought a rugged plastic tool box, because I have seen what can happen to tools in a metal tool box over time when moisture gets in.

[cnw1995]

long-nose needle-nose pliers. I use these for everything!

[SpaceMouse]

QUOTE: Xacto seemingly has spent years perfecting the useless pin vise.

[(-D][(-D][C):-)][(-D][(-D]

[Anonymous]

When I was gluing something recently I realized that the small "Chip Clip" clamps from the kitchen gadget drawer would work well for holding the piece I was gluing. It seems the longer I live, the more I realize that whoever said "necessity is the mother of invention" was right on!

[Anonymous]

I meant to add that you are fortunate, Spacemouse, to have been shown early on that using a pin vise is easy; many modellers spend years thinking it is beyond their skills. Next lesson: after using a pin vise, using a tap to cut threads is a piece of cake. WHen you buy a pin vise, do NOT buy the Xacto one. Any other brand will work fine, but Xacto seemingly has spent years perfecting the useless pin vise.

[Anonymous]

When I got back into model railroading in 1986 after a 16-year lay-off, I was delighted to discover Kadees; the notorious X2F was my biggest headache during my earlier modelling days. After a couple of exercises in contortion while back-fitting KDs to older equipment, I purchased a soft-foam cradle from MicroMark. It holds cars or locomotives safely and securely while I work on them. One of my most indispensable tools.

[tcf511]

I'm not sure if this qualifies as a tool but I thought of it myself rather than stealing it from someone else. I bought a box of plastic tubes to hold siliver dollars. The kind I have are called coin safes. I use them to sort all of my small parts; joiners, screws, couplers, wheelsets, etc. The ones I have are round on the inside but actually square on the outside so that you don't have to worry about them rolling away while working with them and the lids stay on securely. They are easy to label with the flat surfaces and I can just grab the one or two that I need and not mess with plastic bags or larger sets of drawers. Perfect for the tool box. You can buy them by the box of 100 and split them with one or two other people.

[egmurphy]

QUOTE: Simon:
1. The Micro Mark Field Grass planting tool.

2. A sprue nipper.

Wow, thanks for the tip on the field grass planting tool. I'm not quite there yet with the layout but I do have some packages of field grass and I was wondering what I was going to use to plant them!!


One other use for the sprue nipper is to help removing truck pins from bolsters when changing trucks. I tried with needle nose pliers but tend to cru***he plastic pin head. The sprue nipper is fine enough to slip under the head from both sides and pry it up.


Regards

Ed

[darkstar974]

I got a dremel moto-tool various tubes of glue, multimeter a small tack hammer and couple other things But i was wondering what the heck is a anticat device is it anything like a super soaker cause thats what i use !!!

Dark

P.S. no cats were harmed in the making of this reply

[Cox 47]

I have to keep a roll of masking tape on my work bench at all times, I use it in almost every thing I build, Holding thngs together when glueing. to hold things while painting, Roll roofing on buildings,window shades and on and on and its cheap too! Cox 47

[canazar]

Ah tools............

One I found for my tool box, I got a fishing tackle box. All the compartments work great for the tools I use for the trains. (Much smaller than the ones I use at work, it nice) Also, keep my common paints, extra railjoiners, files etc.

But my favortie tool, much to my fiancees concern, is my 9" long kitchen knife. I originally started useing to cut the foam when I first started building my layout and ust kept finding uses for it. here are some uses, but not limited too [:)] Cut cork, railties off the flex track, small hammer, screw driver, wire stripper, model tree pruner, removeing splinters from fiinger, sprue trimmer, wire cutter, and most recently, used to remove handrails on a deseil for painting, and anti-cat deivce for layout security.

(sorta kidding abou the last one)
Dont know what i do without.

Best Regards
john kanicsar

GO EAGLES!

[Anonymous]

A fine, flat file. Just the thing for squaring-off kit parts and also very handy when installing Kadees on more unusual models. I bought a set of five assorted files cheaply in a French supermarket while on holiday there a couple of years ago - cost me about £3 or so but seem to be pretty effective.

I agree about the pin vise and screw holder - I have both, the screw holder usually resides in my computing toolkit but it's occasionally used for tricky model RR jobs. One of my best investments of recent years has been a set of titanium-tipped tiny drills and a pin vise - very useful for drilling out solder from circuit board holes as well as adding handrails, etc!

[chutton01]

Pin Vise, huh? Micromark has a sprung one that you can use as a push drill - just push up and down, and it drills the hole (not sure if you really gain much, although it's a bit easier on the wrist when you have a lot of big holes to drill - oh yes, don't use small bits (<60) w/ this, as you'll likely get the ol' half-bit-stuck-in-the-work-piece deal).
On the same note, that pin-vise can hold a needle, and so help you press a tiny starter 'dimple' for the drill bit so it doesn't wander when you begin drilling and mess up your paint/finish (guess you could use this to all make a few quite ad-hoc rivet holes/impressions if need by)
Two X-acto knife tips (not mine originally of course, but perhaps useful):
Glue/tape a small square piece of styrene to the end (well, where-ever you DON'T normally place your fingers when cutting) - this prevents a rolling knife, which are NOT a good thing (I think Micromark used to sell triangluar sectioned plastic press-on pieces for the same purpose; then again, they used to sell a lot of things...)
You're supposed to carve away from your hand (and body), for obvious reasons. Unfortunately, it seems both control and strength are much better carving toward you (and your hand holding the piece), so most people carve toward themselves regardless of the potential for problems. Well, in that case, a small metal-foam finger splint (a few bucks brought 2) on the finger holding the piece can help prevent unwanted disaster if the knife slips.

[Anonymous]

Ive used jest two. A xacto knife and a screwdriver set. Now before you all laugh at me, my workbench is littered with hand tools that are used once or twice for a specific model problem like drills, cradles, 90 degree square etc etc

I can never have enough tools. One day I will have a complete workbench *...having visions of purchasing Home Depot complete with interior inventory.

Reality says I need to keep the ones I work regularly handy and the rest in a safe place until they are needed.

[CP5415]

Which tool box? [;)]

Gordon

[Anonymous]

Look under tools in "Search the Forums" as this subject has been raised before many times. Clamps are the thing I use the most, always looking for good, cheap clamps. When I built R/C airplanes, someone came up with using spring type clothes pins, both as made and modified. As made they have good clamping power but a short reach. Modified, they have slightly less clamping power, more parallel clamping faces and deeper reach. To modify, simply remove the wood clamping legs, reverse the clamping legs so the outside surfaces now becomes the inside surfaces and stick the legs into the clamping spring backwords, so what was the clamping handles become the clamping jaws. This sounds way more difficult than it is. Once you have 10-15 of these clamps around, you will wonder how you ever did without them! They are cheap and extremly useful.

[SpaceMouse]

QUOTE: Originally posted by jesionowski

Screw Holder / Starter - Holds screws so you can get them started in tight places. I prefer the Walther's one. I also have a different style that I got from my IBM repairman that I also use.

Rick

Thanks, I just went down and liberated the one I kept from my techie days.

[Anonymous]

Screw Holder / Starter - Holds screws so you can get them started in tight places. I prefer the Walther's one. I also have a different style that I got from my IBM repairman that I also use.

Rick

[simon1966]

I have 2 tools that I have been using all the time recently.

1. The Micro Mark Field Grass planting tool. Actually it looks like it is a paintbrush with the hairs removes and a large darning needle stuck in where the brush hairs would go. the top of the needle eye is cut off, leaving a V shape. Put some Woodland scenics grass in the V and push into the foam scenery base. Works great.

2. A sprue nipper. Obvious use, nipping small parts off the sprue, but I also use it to quickly nip off the detail from the top of removed railroad ties that I am going to slide back under the track where ties have been removed to join flex track.