YoHo1975 I think part of the issue is that the vast majority of modelers have little interest in this aspect of the hobby and those that do tend to be superdetailers. Perhaps what will make the most sense is for me to restate what I plan to update on the model. I mentioned it in an early post, but was perhaps not clear, 1: Fans to proper early prototype fans 2: Handrails and basic grabs (remove thick and molded on detail, replace with something of Athearn quality or better. 3: replace Air tank molding and possibly adjust the top of the fuel tank (the molded in bumps that represent the air tanks are bad.) 4: Fill in pilot and replace steps. It's item 4 that we're discussing here. The other 3 items are simple to address. As for cost, the Precision part is ~$13 give or take. I do not consider that expensive. The atlas frame and pilot is about the same. The issue is that using the atlas frame without cutting anything would require switching from the existing truck and gear tower to an Atlas/Kato compatible tower and that would introduce more cost. If I'm cutting the pilot and steps off, then the Atlas product doesn't offer any convenience. That's where the confusion lies I think. I agree the cheapest option is to fill in the pilot with styrene. Looking at assorted step options, I don't see the right products available, but steps for other diesels would set the price at around $5, but I'd have to rebuild the sides that hold the steps. That would certainly be possible. I'm going to have to search more for the proper parts.
I think part of the issue is that the vast majority of modelers have little interest in this aspect of the hobby and those that do tend to be superdetailers.
Perhaps what will make the most sense is for me to restate what I plan to update on the model. I mentioned it in an early post, but was perhaps not clear,
1: Fans to proper early prototype fans
2: Handrails and basic grabs (remove thick and molded on detail, replace with something of Athearn quality or better.
3: replace Air tank molding and possibly adjust the top of the fuel tank (the molded in bumps that represent the air tanks are bad.)
4: Fill in pilot and replace steps.
It's item 4 that we're discussing here. The other 3 items are simple to address. As for cost, the Precision part is ~$13 give or take. I do not consider that expensive. The atlas frame and pilot is about the same. The issue is that using the atlas frame without cutting anything would require switching from the existing truck and gear tower to an Atlas/Kato compatible tower and that would introduce more cost. If I'm cutting the pilot and steps off, then the Atlas product doesn't offer any convenience. That's where the confusion lies I think. I agree the cheapest option is to fill in the pilot with styrene. Looking at assorted step options, I don't see the right products available, but steps for other diesels would set the price at around $5, but I'd have to rebuild the sides that hold the steps.
That would certainly be possible. I'm going to have to search more for the proper parts.
I am aware of the AHM GP18 and had a GN version that I kept for a while specifically because I thought the details on the long and short hood were especially crisp and well done (The pic of the CNW unit in the above link shows the detail well), and that would be a good starting point for a project.
Sounds like a fun project.
Since you are going to remotor the loco for better performance, are you going to address the pizza cutter wheels and wiper electrical pickup system?
- Douglas
I think I understand what you are trying to accomplish... it sounds similar to my goals when I add a diesel to my roster.
I do not like the modern factory-uber-detailed locomotives. The parts are just too fragile, and since I have a freelanced railroad not based on any real railroad, road specific cost-increasers mean nothing to me.
I want my locomotives to have a rugged mechanism I am confortable maintaining and repairing, and I want them to be reliable and easy to work on.
I add detail to bring them to my personal preference of what I consider acceptable. I don't install anything that is just going to get broken or make maintenance into a headache.
Does that sound similar to what you do?
I would install the Prcecision Scale pilot and be done.
-Kevin
Living the dream.
YoHo1975"The joy is in the journey, the struggle is part of the joy and the final destination is not an end but another beginning of another journey." Again, My goal is to spend $20 and to experience the specific hobby activities involved in turning this into a functioning locomotive with details I find acceptable and that is sufficiently reliable in DC that I am willing to add DCC to it whether that means a $15 motor only or a $59 basic sound unit.
I'm reading this thread with some interest, and notice perhaps what might be confusing to some. This goal, to spend as little as possible to make something of nothing so to speak, may not have been understood by many readers considering that the options you previously considered would be fairly expensive. It seemed that achieving a higher level of fidelity was a big part of the goal.
Precision makes an early EMD pilot with steps that seems like a decent price and will work well, but wondering if I'm missing an obvious solution.
The Atlas Classic GP7/9 frame/Pilot could work and costs about the same as the Precision parts, but again, I'd have to move over to different trucks to make that work and I'm not sure I'm willing to spend that much.
IMO, the least expensive solution would be to use scrap styrene to fill in the pilot and to body mount the couplers, as has been suggested by others.
"The joy is in the journey, the struggle is part of the joy and the final destination is not an end but another beginning of another journey."
Again, My goal is to spend $20 and to experience the specific hobby activities involved in turning this into a functioning locomotive with details I find acceptable and that is sufficiently reliable in DC that I am willing to add DCC to it whether that means a $15 motor only or a $59 basic sound unit.
Purchasing a GP18, which, looking on EBAY is going to be at least $50 once shipping is included is not the same hobby activity. Examples of the work involved in a single truck drive unit are useful, but not an entirely fair comparison as this is again, an 8 wheel drive unit with a reasonable motor.
Again, and this seems to happen time and again on hobby forums, It may not be fathomable to everyone, but some people derive specific joy from doing this kind of thing.
I mean, I don't need a GP18, If I didn't have these units, I wouldn't be interested in this at all, but I do have the units and I want to work on the skills and so, I'm seeking advice on the methods.
Anyway, as I said some posts up, while the original motor could be used with DCC, it's not as good as a modern one, so I just paid $17 including shipping to get 8 new Iragashi 5 pole DC motors. Based on some advice I got from the RepowerAndRegear group. It's Aliexpress, so who knows when it arrives, but at about $2 each (including shipping), it's going to be a huge performance upgrade.
Thanks for the link to those photos. They explain some of your concerns, but after viewing those pictures, I would respectfully consider your proposed "upgrades" to be both a waste of time and waste of money, too, even if the cost of those parts is reasonable.
Many years ago, I bought a pair of LifeLike RS-11s via mail order (sight unseen), mainly because I liked the look of the real RS-11s. That was in the days before the release of the Proto-2000 locos, but when the latter appeared, I dubbed my mail-order locos as Proto-no-thousands.
They had similar open pilots, with truck-mounted couplers, one powered truck that ran like a dead snail, and handrails fat enough to be train rails.
I replaced them with a pair of RS-11s from Atlas, but rather than scrap the sow's ears, I decided to see if I could salvage something from them, not necessarily into a silk purse, but maybe a decent change wallet.
Here's one of the Atlas locos (with what now would be considered too-thick handrails)...
...and one of the de-motored and reworked Proto-no-thousand locos...
When I backdated my layout's era, most of the diesels had to go, but I had no trouble finding buyers, even for the two dummy units, each of which went with one of the Atlas units.
If you want a good-looking and decent running GP18, look for one on-line, as LifeLike's Proto2000 GP18s look great, and even if the one you buy has the split gear issue, it's easy enough to fix for not much money.
You can check 'em out HERE
As I mentioned earlier, I do "get" the concept of rescuing something deemed irredeemable by others, but do yourself a favour, and get even better results.
Wayne
ndbprr You have $6.00 invested and want to make a poor model into a good model for little cost. You are going to have to invest close to the cost of a good model in a poor model. Why not just put the money into a better model and save the time and effort for something else.
You have $6.00 invested and want to make a poor model into a good model for little cost. You are going to have to invest close to the cost of a good model in a poor model. Why not just put the money into a better model and save the time and effort for something else.
I don't think this is true at all. Though it does depend on your definition of a good model. I'm not planning to make this as accurate as the afformentioned Genesis. However, I do believe that I can make this into an extremely credible model and a great runner for around $20 in detail parts including the pilots should I go that route.
I can get the unit running again with the existing motor, Or drop in a nice modern motor for less than $5 and get a smooth quiet locomotive.
The only additional cost then would be DCC and that price is really up to whether I decide to add sound.
Jumijo "In my first post, I said the Pilot is open for truck mounted couplers and that was an easy fix, but that the steps are also not accurate and are sufficiently inaccurate that I want to put in the effort to address them. couplers and that was an easy fix, but that the steps are also not accurate and are sufficiently inaccurate that I want to put in the effort to address them." So you're willing to fill in the AMT pilot yourself? It seems to me from your quote that all you need or want to do is make the steps more accurate. You can cut them off and do one of three things. 1. You can scratch build the stairs. This is the cheapest option and the outcome relies on your modeling skill. If you do choose this option, consider using bread clips for the material. They are made from a thin, sturdy plastic and are in every home. I often use them for step repair. 2. You can have the steps 3-D modeled. Do a search on Shapeways and other printing sites to see if any have already been created. If not, draw up some yourself or hire someone. 3. Purchase a shell with more accurate steps and graft them on to your shell. None of the options presented require removal of the pilot, or lessening the integrity of the front of the shell. Do you plan to replace the oversized railings, or do those inaccuracies not bother you?
"In my first post, I said the Pilot is open for truck mounted couplers and that was an easy fix, but that the steps are also not accurate and are sufficiently inaccurate that I want to put in the effort to address them. couplers and that was an easy fix, but that the steps are also not accurate and are sufficiently inaccurate that I want to put in the effort to address them."
So you're willing to fill in the AMT pilot yourself? It seems to me from your quote that all you need or want to do is make the steps more accurate. You can cut them off and do one of three things.
1. You can scratch build the stairs. This is the cheapest option and the outcome relies on your modeling skill. If you do choose this option, consider using bread clips for the material. They are made from a thin, sturdy plastic and are in every home. I often use them for step repair.
2. You can have the steps 3-D modeled. Do a search on Shapeways and other printing sites to see if any have already been created. If not, draw up some yourself or hire someone.
3. Purchase a shell with more accurate steps and graft them on to your shell. None of the options presented require removal of the pilot, or lessening the integrity of the front of the shell.
Do you plan to replace the oversized railings, or do those inaccuracies not bother you?
The reason I considered taking the whole pilot off is because it isn't tall enough. again, easy enough to address with Styrene, but the steps then have the same issue.
Obviously, I can fabricate the steps or use etchings as others have suggested, and I may try that, but when I saw the Precision pilots which were a one shot deal, I thought that may be the route to go.
It seemed to my mind that addressing both at once would be easier.
Lee
Modeling the Baltimore waterfront in HO scale
I think any part grafted on should be strong enough for body mounted couplers, especially with a little reinforcement. The forces aren’t that great, and they would be spread out over a wide joint.
-Peter. Mantua collector, 3D printing enthusiast, Korail modeler.
I agree with Wayne. My dad had a couple of these 40 years ago, and we used styrene to close the pilots and body mounted the couplers. I remember it being easy to, so why complicate things?
Chuck - Modeling in HO scale and anything narrow gauge
doctorwayne YoHo1975 I know how to close in the pilots. But that's added work and a lot more cost because, again, I'm now ditching a much larger portion of the GP18...Now, the AHM shell is still better than the Athearn shell, so it would still be a better loco, but it would still cost significantly more money. Hardly extra work to close-in the pilots and add body-mounted couplers, and if you've got sheet styrene on-hand, even as saved scraps, there is no "cost" involved.I "get" the idea of improving a model that doesn't quite meet your needs, but we might have a better chance of being useful if you'd show us a picture of what you have, and your thoughts on what you think needs to be added or removed or altered. I happened to stumble across this a few minutes ago. While it may be pricier than your current plan, it might be a better option in the long run. Wayne
YoHo1975 I know how to close in the pilots. But that's added work and a lot more cost because, again, I'm now ditching a much larger portion of the GP18...Now, the AHM shell is still better than the Athearn shell, so it would still be a better loco, but it would still cost significantly more money.
Hardly extra work to close-in the pilots and add body-mounted couplers, and if you've got sheet styrene on-hand, even as saved scraps, there is no "cost" involved.I "get" the idea of improving a model that doesn't quite meet your needs, but we might have a better chance of being useful if you'd show us a picture of what you have, and your thoughts on what you think needs to be added or removed or altered.
I happened to stumble across this a few minutes ago. While it may be pricier than your current plan, it might be a better option in the long run.
I guess I made a bad assumption that the old heads here knew what an AHM GP 18 looked like without needing pictures. It's been a part of the hobby for at least 45 years now. I'm well aware of the Genesis model. Not sure how a $300+ model is a solution to a problem with a $3 model, Or even a $50 used Proto2K version.
For those who do not know the model in question
https://ho-scaletrains.com/ahm-emd-gp18/
Before the introduction of the scale width Front Range GP9, the Mehano GP18 was the most dimentionally accurate plastic First Gen GP available.
My goal here, what will bring me modelling joy is to turn this sows ear into a Silk purse. Buying a Gucci bag doesn't really accomplish that as far as modelling goes.
In my first post, I said the Pilot is open for truck mounted couplers and that was an easy fix, but that the steps are also not accurate and are sufficiently inaccurate that I want to put in the effort to address them.
Da Stumer I don't quite follow why you would need to change the trucks to use the Precision parts or Atlas pilot. The structural part of the Mehano frame doesn't go all the way to the pilots, it stops right past the hood mounting clips which are beyond the truck mounts. If you made a slightly angled cut right at the inside edge of the steps so they meet at a v just beyond the hood mounting hole, I think you should be able to remove them and the pilots and graft on a new section without affecting the chassis fit or rigidity. The sill thickness might not match though. Or, are the trucls
I don't quite follow why you would need to change the trucks to use the Precision parts or Atlas pilot. The structural part of the Mehano frame doesn't go all the way to the pilots, it stops right past the hood mounting clips which are beyond the truck mounts. If you made a slightly angled cut right at the inside edge of the steps so they meet at a v just beyond the hood mounting hole, I think you should be able to remove them and the pilots and graft on a new section without affecting the chassis fit or rigidity. The sill thickness might not match though.
Or, are the trucls
The initial suggestion was that the Precision part would not offer sufficient structural integrity to handle body mount couplers, because of the joint with the frame and so I should look at a complete solution such as the Athearn pilot+ walkways. So I was responding to that comment. I'm not sure that's true, but I will take the advice given as worthy of consideration. That's what lead me down this path. Cutting the Athearn BB GP7/9 body off leaving the steps and pilots isn't really sufficient to the need. The Atlas Classic GP7/9 frame appears to be the closest design. I guess the real thing I'm trying to figure out is if there's a different product or different way to attach this that is either less expensive, or the same cost, but "better" where better could mean, more robust, easier to do, etc. But that is certainly not significantly more expensive.
With the Precision part being the baseline.
YoHo1975I know how to close in the pilots. But that's added work and a lot more cost because, again, I'm now ditching a much larger portion of the GP18...Now, the AHM shell is still better than the Athearn shell, so it would still be a better loco, but it would still cost significantly more money.
I would watch eBay for a clunker GP18 with the pilot you want and go for it. A GP18 is a GP18, simply chop off and replace the portion you need. Simple kitbash.
Edit:If your GP18 is a Rivarossi, all the Rivarossi diesel drives I've seen are the pits. Single rear truck powered and terrible power pickup. I kitbashed a pair of Athearn PA frames and fit two Rivarossi Krauss Maffei ML-4000 shells on them, from two axle drive and four axle power pickup to all wheel drive and power pickup.
Mel Modeling the early to mid 1950s SP in HO scale since 1951My Model Railroad http://melvineperry.blogspot.com/ Bakersfield, California Aging is not for wimps.
I know how to close in the pilots. But that's added work and a lot more cost because, again, I'm now ditching a much larger portion of the GP18...Now, the AHM shell is still better than the Athearn shell, so it would still be a better loco, but it would still cost significantly more money.
So I guess I'll modify my original question, is there a better option than the Precision pilot and steps that won't turn a $12 project into a $50 project.
YoHo1975...The problem with the Athearn is that it's still not a great pilot, because of the section missing to get the couple on chassis on...
The photo below shows Athearn diesels with body-mounted couplers and closed-in pilots....
This photo is a little clearer, and will enlarge if clicked-upon...
If you're interested, I can take some photos to show how it's done, as it's not difficult.
I think you need to think this through. Are the couplers or coupler boxes attached to the pilot? If so how would you fasten couplers to a glued on pilot? Best choice may be a coupleof sacrificial shells with better degree of accuracy pilots. I would start with some Athearn blue box shells.
I have 2 of these beasts that I got for $6 total. Neither runs, but I can get these working agian in my sleep. May even swap in some cheap can motors to improve them. I plan to strip them, rip off the handrails, replace the fans with appropriate ones plus add better handrails and wire steps and paint in my club's scheme. But the single biggest failing on this locomotive is the pilots and steps. Open pilot is easy to fill, but the steps are also wrong.
Anyone ever fixed this on these? Precision makes an early EMD pilot with steps that seems like a decent price and will work well, but wondering if I'm missing an obvious solution.
I don't have anything in my parts bin to help either. Otherwise this would be relativley easy.