Disappointed--the continuing Lil Guy saga--- S1 Pic Added

[twhite]

Spacemouse--hey, that S1's a cutie, and this is from a guy who is 100% steam. But Lil' Guy's a whole heck of a lot cuter. Even if he is a racehorse!
Tom [:D][:D]

[Jetrock]

Take the Tech II down to 10-15% (with pulse power on if you've got it) and that trip can take even longer...see what we mean about the joy of slow engines?

One thing about the SW1's current paint job: Early in the diesel era, it was common for engines t be delivered from the factory with a black paintjob and lettering, and it sometimes took the owning railroad a while to repaint them, especially when it came to low-status switchers.

[tstage]

Chip,

I must say that Penny and Lil' Guy make a VERY lovely couple together. [:)] Hoping that you'll be pleased with your decision on getting the S1.

Tom

[SpaceMouse]

The Proto 2000 S1, in my uneducated opinion is highly detailed and you can tell that there is quality there. I have running around the track now--well running is not quit the right word. Mosey is better. At 50% throttle on my Tech II 1400, it takes 80 seconds to get around a 6' oval. Anyway, here it is.

[rrinker]

QUOTE: Originally posted by CNWfan5525

QUOTE: Originally posted by tstage

Chip,

You gotta run it at least once "around the circuit" before tackling the decoder.

Tom

It would be nice if people would tell ME these things....First thing i do when i get a new engine is slap a decoder on it.

I do the same thing, at least if it's a loco like one I already put a decoder in. If it's something new I ALWAYS check the stall current and check the DCC plug (if so equipped) for stupid wiring mistakes that will fry the decoder - witness the P2K's with dead shorts across the one function output, or the MDC Critters with the constant lighting diodes installed backwards as to dead short the FOF and FOR functions.
Mechanical break-in occurs just fine running under DCC power.

--Randy

[Jetrock]

Simple way to break it in: Let it run around and around in a circle for an hour or two.

Railroads often had several paint schemes: SP had its Daylight colors, Black Widow black silver & red, and the gray & red Bloody Nose. Western Pacific's diesels started out black with white stripes, but then received silver-and-orange "Zephyr" schemes, later replaced with green bodies and orange lettering, or orange bodies and black lettering. Just because two locomotives ran on the same line doesn't mean they'll carry the same paintjob...

[mcouvillion]

Chip,

I usually break mine in on the bench, taking the shell off and supporting it so that the wheels don't touch anything, then connecting it to a power supply and running it at different speeds in both directions for a while. Actually, I usually totally dis-assemble my engines first, clean, lubricate with my lube (Dexron II), polishing the wheels treads, then carefully re-assemble, gauging as I go, and then run it in. Once it runs well slowly in both directions, then it is ready for the track - not before. No use dirtying up the wheel treads while trying to get it to run in the first place. But then, that's what I've figured out over quite a few years of running trains.

Mark C.

[Anonymous]

QUOTE: Originally posted by tstage

Chip,

You gotta run it at least once "around the circuit" before tackling the decoder.

Tom

It would be nice if people would tell ME these things....First thing i do when i get a new engine is slap a decoder on it.

[SpaceMouse]

QUOTE: Originally posted by 4884bigboy

A good break in period lasts atleast 2 hours.

Can we see some pics of the S1?

Working late tonight. I'll have them up about 10 pm EST.

About the breakin. What is the proper proceedure? It is my first new Engine in 30 years.

[Anonymous]

A good break in period lasts atleast 2 hours.

Can we see some pics of the S1?

[SpaceMouse]

QUOTE: Originally posted by tstage

Chip,

You gotta run it at least once "around the circuit" before tackling the decoder.

Tom

Okay, Okay.

what's the break-in? 30 minutes each direction?

[tstage]

Chip,

You gotta run it at least once "around the circuit" before tackling the decoder.

Tom

[BRAKIE]

Guys,Let's paint the PRR freight units their true color..Grimy Black ![;)] The freight units *may* have started life as "Brunswick Green" but it sure didn't last long..Only the passenger units was Tuscan Red.

[Anonymous]

painting an engine really isnt that hard. Some of you may remember a couple months ago when i painted my first engine. It came out great! Still havent got around to making the decals. But i detailed it. Theres pics of it if you click the link in my signature.

[mcouvillion]

Chip,

I'm following the saga of "Chip in the Train Yard" and it gets curiouser and curiouser all the time. You are right, your wife has probably got wind of how much you are spending on trains and getting ready to slam on the brakes. I'll keep watching.

Mark C.

[SpaceMouse]

I got it today at work. I'm thinking I'll order the decoder for it today, thought I'd wait for the decoder before running it.

[tstage]

Chip,

The PRR is/will be the "Brunswick Green" that Randy mentioned. It does look black initially but has, what I call, a "whisper" of green added to it. I would assume the E7 would be the same paint scheme.

I wasn't clear. Did you actually receive the S1 today, or are you still waiting for it to arrive? If it did arrive, did you try it out yet?

Tom

[ndbprr]

well as usual never say never. Early PRR passeneger engines were DGLE and switched to Tuscan about the time the PA's and E7's were delivered. Better check which one you ordered becasue it could be either paint scheme and would be correct BUT the never say never is that there was one swicther painted Tuscan for use at Sunnyside Yard in new york. The bad news is that it was a Baldwin not an EMD.

[AggroJones]

Well, it happens. One time I bought a reefer without seeing the actual product before online. When it came, it was a different paint scheme than I thought I was getting. Sure it was accurate, but not the one I wanted. That yelloe ART reefer sat on my shelf for a while, and evenutally I stripped and repainted/decaled it to dual herold PFE livery.

You may want to repaint her. Being a Pennsy hood unit, it shouldn't be too hard.

[rrinker]

A good example is the GP up on Horsehoe Curve, if it's still there and they haven't moved it for restoration yet. On the non-rusted patches of paint, if you are on the shady side it looks black, go around to where the sun shines on it, you CAN see the green. Some model paints get it right, some(like Floquil) are WAY too green.

--Randy

[SpaceMouse]

Danged if I don't have to squint both eyes and imagine that there's green in there.

So now I'm going to paint the body Brunswick Green and the rails black and try to imagine there's a difference. I knew there was imagination involved in this hobby but sheesh.

I think I'm going to paint it black and imagine it's Tuscan Red.

[rrinker]

It's not black (unless it's Penn Central, not PRR). It's "Brunswick Green" which is best described as black, with a drop of green in it. Most often, it DOES look like black, but when the light hits it just right you can see the hint of green. It IS a correct color for PRR.

--Randy

[SpaceMouse]

As those of you following As the Stomach Turns know, we last left it that I was waiting on some Tuscan Red paint and I was going to make Lil Guy part of my PRR fleet. What I didn't tell you and was my ace in the hole was that I was also waiting for my PRR Proto 2000 S1 so that I could match color schemes.

Guess what? The Proto S1 which I hadn't seen is all black with gold decals. I had images of vast fleets of Tuscan Red (I really like that color scheme on passenger cars) PRR running from my own 6 track passenger terminal. If the E7 comes and is all black, I swear I'm going all freight and take over a switching yard somewhere.