Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

What would you like to see made?

2626 views
63 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2019
  • 32 posts
Posted by TheFlyingScotsman on Monday, October 26, 2020 10:57 AM

I wish Intermountain would spin their brass-beating AC-12 in HO through 180 degrees and add and subtract the few details that would give me an AC-9

  • Member since
    July 2002
  • From: Jersey City
  • 1,922 posts
Posted by steemtrayn on Tuesday, October 20, 2020 1:52 AM

rrinker

Alco Models did the BPA-20 passenger sharks in brass. There's an A-B set on eBay right now. The B is a dummy but it has metal wheels so you could put a heck of a sound system in there.

                                      --Randy

 

Thanks for the reply,Randy. The Alco passenger sharks have a freight nose. Oriental's are accurate (and expensive). I have two sets of those, one red and one dgle. I'd like to see them done in plastic, and all the excuses for not making them ("The freight sharks didn't sell well", "Only one railroad had 'em") Don't cut it with me, after all, they did more than one run of the Centipedes, and what about the T1, New haven jets and FL9 etc. There's a lot of Pennsy fans and modelers out there, and I can't imagine one NOT wanting a BP20.

  • Member since
    February 2002
  • From: Reading, PA
  • 29,156 posts
Posted by rrinker on Sunday, October 18, 2020 9:00 PM

Alco Models did the BPA-20 passenger sharks in brass. There's an A-B set on eBay right now. The B is a dummy but it has metal wheels so you could put a heck of a sound system in there.

                                      --Randy


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    July 2002
  • From: Jersey City
  • 1,922 posts
Posted by steemtrayn on Sunday, October 18, 2020 8:25 PM

Wanted models - Model Railroader Magazine - Model Railroading, Model  Trains, Reviews, Track Plans, and Forums

  • Member since
    July 2002
  • From: Jersey City
  • 1,922 posts
Posted by steemtrayn on Sunday, October 18, 2020 8:22 PM

  • Member since
    February 2007
  • From: North Aurora, IL
  • 471 posts
Posted by ho modern modeler on Sunday, October 18, 2020 8:17 PM

TILX Longitudinal Dump Coal Hoppers in HO.

Mine doesn't move.......it's at the station!!!

 

  • Member since
    December 2003
  • From: Good ol' USA
  • 9,432 posts
Posted by AntonioFP45 on Sunday, October 18, 2020 7:26 PM

Well,

a picture's worth a thousand words!

 

(photo by Aaron Quails)

"I like my Pullman Standards & Budds in Stainless Steel flavors, thank you!"

 


  • Member since
    February 2002
  • From: Reading, PA
  • 29,156 posts
Posted by rrinker on Sunday, October 18, 2020 2:43 PM

 Pretty much every first gen diesel of the Reading ahs been made by someone - all the F units, RS3s, AS16, GP7, Baldwin switchers, Alco switchers - so I can obtain enough locos.

I do wish someone would do more original scheme cabooses, with more than the single road number Proto 2000 made, so I don't have to renumber them all myself.

And Red Caboose used to have nice regular flatcar kits - the newer RTR release of them they haven't done in Reading. 

Maybe an I-10 that's not the old junk Bachmann one - Bowser doesn't make the chassis repalcement any more, and those weren't exactly the best runners either. I could probably fudge it a bit and have one or two in helper service alongside the T1's. Just have to watch the road numbers and not have any that were rebuilt into the T1s. 

 Could use a rerun of the N Scale Architect's Reading Tower in HO - I need more than one tower on my layout. A watchman shanty for manned crossings, so I don't have to scratchbuild such a thing. And a station other than the old kit for Quakertown, which is somewhat unique.

                                    --Randy

 


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    January 2017
  • From: Southern Florida Gulf Coast
  • 10,114 posts
Posted by SeeYou190 on Sunday, October 18, 2020 10:20 AM

willy6
18 wheelers with lights and sound. 

Why would you want the articulated lorries to make noise? Unless they were moving, they would just be idling. Maybe the air unloader would cycle every fifteen minutes or so, and the air clutch on the fan could engage every once in a while.

What noises would you want?

oldline1
I'd really like to see an F-7A&B

Only if it is offered in SANTA FE red and silver warbonnet paint.

Stick out tongue

-Kevin

Wink Happily modeling my STRATTON & GILLETTE RAILROAD. A Class A line located in a personal fantasy world of semi-plausible nonsense on Tuesday, August 3rd, 1954.

  • Member since
    January 2003
  • From: Ridgeville,South Carolina
  • 1,262 posts
Posted by willy6 on Sunday, October 18, 2020 9:19 AM

HO scale 80's 90's Hess gasoline tank trucks and other 18 wheelers with lights and sound. 

Being old is when you didn't loose it, it's that you just can't remember where you put it.
  • Member since
    August 2006
  • 75 posts
Posted by charlieB on Saturday, October 17, 2020 9:43 AM

Theres a gentleman from Germany Peter Rings who produces a resin cab of a 60s International Loadstar.You would have to use another vehicle to complete it

  • Member since
    January 2011
  • From: Lancaster city
  • 495 posts
Posted by cats think well of me on Saturday, October 17, 2020 9:09 AM

BLI to do the PRR M1, M1a, and M1b in both pre-war and postwar configurations with either the four or six axle tenders, and of course, with or without trainphone antenna array. With diecast boilers like their K4s and L1s models. I'd not mind seeing them do a variant of the K4s with the 130p75 tender that 1361 and others had. I did one using a BLI locomotive and Sunset tender.

Love to see a PRR H21 hopper. The Pennsy had loads of them and though the Bowser model is alright, I'd love it if someone did a model with seperate grab irons, brake lines and all, in loads of different numbers. Pennsy modelers would by them by the case.

Walthers to rerun their 1953 Broadway Limited set, and even do the 1948 rendition with gold leaf lettering. 

Alvie

  • Member since
    August 2020
  • 5 posts
Posted by ucf_knight on Friday, October 16, 2020 1:03 AM

I'd like to see HO scale Amtrak Auto Train Aluminum Vehicle Carriers.

Kato made them in N scale but, like many things, didn't make them in HO.

  • Member since
    May 2014
  • From: Berwyn, PA
  • 721 posts
Posted by Trainman440 on Wednesday, October 14, 2020 10:08 PM

oldline1

I'd really like to see an F-7A&B, UP Big Boy, UP Challenger, Pennsy K4 Pacific and an N&W J.

oldline1

I'd really like to see engines with smoking whistles, smoking dynamos, moving bells, opening water latches, smoking diesel exhaust, moving cab figures, rotating fan blades, depleting coal loads, flickering fireboxes, steam release smoke, (PRR & NYC) water scoop tender water splash, operating power reverse, operating uncoupling levers/auto opening couplers, etc.

Rather than producing a drivetrain that will actually last. 

Charles

PS admittedly, some of those features actually do sound pretty cool lol.

 

---------------------------------------------------------------------------------------------------------------

Modeling the Santa Fe & Pennsylvania in HO

Youtube Channel: https://www.youtube.com/channel/UCLb3FRqukolAtnD1khrb6lQ

  • Member since
    July 2006
  • From: Huntsville, AR
  • 1,158 posts
Posted by oldline1 on Wednesday, October 14, 2020 7:59 PM

ATLANTIC CENTRAL

 

 
oldline1

I'd really like to see an F-7A&B, UP Big Boy, UP Challenger, Pennsy K4 Pacific and an N&W J.

oldline1

 

 

 

You're funny.....

Just think of all the cool stuff we could have had with all the money that went into tooling those locos by four or five different companies........

And I still think this industry misses a lot of profit with all this duplication......

Sheldon

 

 

Sheldon, You're exactly right. With so many versions of those engines I listed they could have done some of the other desirable engines (and cars). As much as those are popular there are other popular engines that could have been produced. How about a B&O President P-7d or e, N&W M or M-2 4-8-0, Pennsy G5s, E6s, A5s or 2-8-0's, 4-6-0's that would benefit folks with smaller layouts? 

oldline1

  • Member since
    April 2012
  • From: Huron, SD
  • 901 posts
Posted by Bayfield Transfer Railway on Wednesday, October 14, 2020 1:43 PM

Lastspikemike

 Lakeshore Sub

I second the request for a FM H16-66, the true Baby Trainmaster
 

 

 

Only 59 prototypes. Not likely.

Only a handful of roadnames.

The one at Nelson BC painted in old CPR colours never even formed part of the CPR stable.

Plus, they look just like a real Trainmaster so if you really want a baby one you can just buy  a Trainmaster and say it's just a baby.

 




Hush, dear, grownups are talking.
 

Disclaimer:  This post may contain humor, sarcasm, and/or flatulence.

Michael Mornard

Bringing the North Woods to South Dakota!

  • Member since
    April 2012
  • From: Huron, SD
  • 901 posts
Posted by Bayfield Transfer Railway on Wednesday, October 14, 2020 1:42 PM

Lakeshore Sub
I second the request for a FM H16-66, the true Baby Trainmaster
 



Hoorah!  You are obviously a man of wealth and taste.

 

Disclaimer:  This post may contain humor, sarcasm, and/or flatulence.

Michael Mornard

Bringing the North Woods to South Dakota!

  • Member since
    January 2014
  • From: MN
  • 89 posts
Posted by Da Stumer on Tuesday, October 13, 2020 10:47 PM

An EMD SW1001 would be nice. There’s one on Shapeways, but from what I’ve seen shapeways models still have a grain to them and the material ages poorly/is brittle.

-Peter. Mantua collector, 3D printing enthusiast, Korail modeler.

  • Member since
    May 2008
  • From: Miles City, Montana
  • 1,632 posts
Posted by FRRYKid on Tuesday, October 13, 2020 9:58 PM

What I'd like to see is a bit more variety of HO scale vehicles that would be era appropriate for the 70s. I know there are the Oxford models and a few others but the models they have are a only a few of the prototypes from that era. (I did find a Pacer but it was quite expensive.)

"The only stupid question is the unasked question."
  • Member since
    March 2017
  • 4,503 posts
Posted by Track fiddler on Tuesday, October 13, 2020 8:03 PM

Evening

Bridge gussets plates with the rivets in N scaleIndifferent

 

ME, ...Hello!

 

 

TF

  • Member since
    January 2009
  • From: Maryland
  • 9,771 posts
Posted by ATLANTIC CENTRAL on Tuesday, October 13, 2020 7:58 PM

oldline1

I'd really like to see an F-7A&B, UP Big Boy, UP Challenger, Pennsy K4 Pacific and an N&W J.

oldline1

 

You're funny.....

Just think of all the cool stuff we could have had with all the money that went into tooling those locos by four or five different companies........

And I still think this industry misses a lot of profit with all this duplication......

Sheldon

    

  • Member since
    July 2006
  • From: Huntsville, AR
  • 1,158 posts
Posted by oldline1 on Tuesday, October 13, 2020 7:50 PM

I'd really like to see an F-7A&B, UP Big Boy, UP Challenger, Pennsy K4 Pacific and an N&W J.

oldline1

  • Member since
    June 2005
  • 4,086 posts
Posted by Darth Santa Fe on Tuesday, October 13, 2020 6:23 PM

I'm hoping BLI will complete the Brass Hybrid PRR 6-4-4-6.  They were putting it on the back burner since they were having a lot of trouble making it work on anything below a 36"(?) radius.  I actually did some tests using my Bowser T-1 and gave them a few suggestions on how it could work without compromising the detail too much.  Haven't heard back from them on that, but they were kind enough to let me view a couple shots of their 3D model at the time to see if I had some ideas, so they do seem to be open to suggestions from the modelers.

_________________________________________________________________

  • Member since
    January 2002
  • From: Hilliard, Ohio
  • 1,021 posts
Posted by chatanuga on Tuesday, October 13, 2020 6:16 PM

Since my wishes for the phase 2 and phase 3 Amtrak SDP40Fs in HO came true, I'd like to see phase 2 and 3 Amtrak P30CHs in HO.

Kevin

  • Member since
    June 2008
  • 588 posts
Posted by tin can on Tuesday, October 13, 2020 3:19 PM

Homasote roadbed.

Santa Fe 2-6-2 and 2-8-2 locomotives (we'll see if BLI comes through on the Mikados).

 

Remember the tin can; the MKT's central Texas branch...
  • Member since
    December 2001
  • 2,967 posts
Posted by chutton01 on Tuesday, October 13, 2020 3:10 PM

Probably something like it exists already, but I would like a hobby level miter saw which can handle something thicker than what the Micromark Mini-Miter or the Hercules Cut Off or other knock-offs can do (which seems to be 1 inch or less for most - I'd like a 4 in thickness). Full size miters like my Delta, even with a fine blade...not a pretty sight with plastics (I tested with a junk gondola, kept my fingers far away). I like the idea of nice, right angled cuts, and dremel just wanders a bit too much in my hands for that (and we won't even mention "snap saws").

Speaking of nice angled cuts, the NWSL True-Sander was a good idea...on paper. Maybe it has been improved in over 15 years, but I had one (briefly), used it a few times until the sanding block wore nasty grooves in the verticle sanding surface = why wasn't this edge made with (hard metal - no scorable aluminum) or maybe very hard non-scorable plastic. Yes, you'd have to pay some more up front, but it wouldn't suck.

  • Member since
    August 2006
  • From: Franconia, NH
  • 2,987 posts
Posted by dstarr on Tuesday, October 13, 2020 3:06 PM

I want Floquil paint.  I have been getting by on rattle cans and my stash but things could get grim when my stash finally runs out. 

 

  • Member since
    April 2011
  • 9 posts
Posted by Seeker_CNY on Tuesday, October 13, 2020 2:57 PM

I would like to see decent renditions of the International Loadstar and Fleetstar trucks of the late 60's and early 70's. They were quite common here in the Northeast. 

  • Member since
    February 2008
  • From: Potomac Yard
  • 2,220 posts
Posted by NittanyLion on Tuesday, October 13, 2020 2:40 PM

BATMAN
 
NittanyLion

Earlier today I found out that CN is doing heritage units, so those.

 

There was a list of what they are doing on one of the FB pages, it was quite long.

Algoma Central
BC Rail (Red/White/Blue)
BC Rail (Two Tone Green)
Bessemer & Lake Erie (early Orange/Black)
CN Zebra Stripes
CN North America Map
CN original
Central Vermont (Black/Red)
Detroit, Toledo & Ironton
Duluth, Missabi & Iron Range
Duluth, Winnipeg & Pacific (Deliver With Pride)
Elgin, Joliet & Eastern
Illinois Central Gulf (Orange/Charcol Grey)
Green Bay and Western (Early Red/White)
Gulf, Mobile & Ohio (red/white redbird scheme)
Grand Trunk Western
Illinois Central
Wisconsin Central
 

I'll get a Bessemer one.  Hometown railroad for me.  I'm glad they went with the old school Butterknife scheme instead of the MILW looking one.

Lastspikemike

 

 
Lakeshore Sub
I second the request for a FM H16-66, the true Baby Trainmaster
 

 

 

Only 59 prototypes. Not likely.

Only a handful of roadnames.

People say this sort of thing, but...Athearn just asked a King's ransom for the SD90MAC-H, that had less than 70 units built.

Seems like locomotives fall into four groups: they built 3 and canceled production; they were never broadly popular and built less than 150; one railroad liked them and there were about 300; and widely popular and there's 3,000 of them.  

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!