Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Life-Like Proto 2000 FA2 truck gears

2768 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2018
  • 3 posts
Life-Like Proto 2000 FA2 truck gears
Posted by RockIslandfan3 on Wednesday, July 18, 2018 8:58 AM

After replacing the split axle gears in my Life-Like Proto 2000 FA2 it still ran with a wobble in the rear truck. After dis-assembly of both trucks, I've found the idler gear in each truck is worn in the bore hole through the gear. With the rear truck being the worst, ive matched the other 2 gears to Athearn 23tooth ATH40030 but cant find a replacement for the 19 tooth idler gear, as the old Athearn bluebox kits use a 16tooth gear instead. The gears shafts are un-marked.

 

Any ideas for the cause? This was a ebay special sold "in like new condition with no box" so I dont know its life prior to 2 months ago. I havent lubed anything yet, but intended to use La Belle oil

Ive had a reply from Walthers that besides complete axle assemblies theres no parts for these Loco's any more. So Im not sure how to repair this loco, or do I turn it into a dummy unit

  • Member since
    January 2007
  • From: Kentucky
  • 10,660 posts
Posted by Heartland Division CB&Q on Wednesday, July 18, 2018 6:09 PM

Welcome ... to the forum ... Feel free to participate some more. 

Perhaps, you can locate a junked Proto 2000 or Proto 1000 locomotive with the same gear you are looking for. Then you can salvage the part you need. 

GARRY

HEARTLAND DIVISION, CB&Q RR

EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU

  • Member since
    November 2016
  • 476 posts
Posted by j. c. on Wednesday, July 18, 2018 6:25 PM

pm me as i have a junked out bl2 , think the gearing is the same.

  • Member since
    July 2018
  • 3 posts
Posted by RockIslandfan3 on Thursday, July 19, 2018 6:02 AM
I just checked the part numbers for the BL2, the numbers are different _ BL2 - 584409 / FA2 584344.
  • Member since
    November 2016
  • 476 posts
Posted by j. c. on Thursday, July 19, 2018 11:28 AM

ok it was a shot. will look again to see if i have any fa parts.

 

  • Member since
    August 2008
  • From: Omaha, NE
  • 35 posts
Posted by kingcoal on Thursday, July 19, 2018 1:46 PM
Try Northwest Shortline. Drop them a line. A little pricey, but extremely helpful staff.
  • Member since
    July 2006
  • From: Ontario
  • 140 posts
Posted by dieselsmoke on Friday, July 20, 2018 8:23 AM

The FA-1 & 2 trucks have a longer wheelbase than the Blomberg trucks used on EMD locos. Walthers did have gears for them as I bought some to power dummys. Give them a call and see if they still have any.

Jim

  • Member since
    November 2015
  • 1,345 posts
Posted by ATSFGuy on Saturday, July 21, 2018 3:36 PM

Is this an older release of a Proto FA?

Do you happen to have the box with the product number?

  • Member since
    July 2018
  • 3 posts
Posted by RockIslandfan3 on Monday, July 23, 2018 5:10 AM

No sorry, bought it on ebay without the box or information sheets. Road number 737-A in ERIE colors. I notice its a clone of an Athearn bluebox drive tho, so would that make it an earlier production model? The booster unit i bought new with the same road number ERIE 737-B was bought in the very late 1990s. 

Walthers have told me they no longer have any parts for these locomotives only complete axle assemblies when they have stock. They did however provide me the information sheets for the FA2/FB2.

 

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!