Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

1:87 scale Working Table Lamp

2384 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
Moderator
  • Member since
    May 2009
  • From: Waukesha, WI
  • 1,752 posts
Posted by Steven Otte on Thursday, May 31, 2018 9:32 AM

Mel,

We're always looking for short how-to articles that can be slotted into an issue when the page count changes. I'd suggest you submit an article on this topic. Follow this link for information on how to do so.

http://mrr.trains.com/magazine/about-us/contributor-guidelines

--
Steven Otte, Model Railroader senior associate editor
sotte@kalmbach.com

  • Member since
    November 2007
  • From: California
  • 2,327 posts
Posted by HO-Velo on Wednesday, May 30, 2018 9:05 PM

Mel,  Very cool & clever, nice tutorial too!

Thanks and regards,  Peter

  • Member since
    March 2011
  • 1,950 posts
Posted by NVSRR on Wednesday, May 30, 2018 8:34 PM

Nice idea.   I can see a ceiling fan made in a similar fasion.   Non working of course. 

A pessimist sees a dark tunnel

An optimist sees the light at the end of the tunnel

A realist sees a frieght train

An engineer sees three idiots standing on the tracks stairing blankly in space

  • Member since
    July 2006
  • From: Bradford, Ontario
  • 15,583 posts
Posted by hon30critter on Wednesday, May 30, 2018 8:06 PM

The lamps look great Mel!

Dave

I'm just a dude with a bad back having a lot of fun with model trains, and finally building a layout!

  • Member since
    March 2007
  • From: College Station, TX
  • 675 posts
Posted by Arjay1969 on Wednesday, May 30, 2018 6:44 PM

Very nice!  I've done something similar based on the leg lamp from A Christmas Story.  It's the small details that people notice. 

Robert Beaty

The Laughing Hippie

-----------------------------------------------------------------

The CF-7...a waste of a perfectly good F-unit!

-----------------------------------------------------------------

Then it comes to be that the soothing light at the

end of your tunnel, Was just a freight train coming

your way.          -Metallica, No Leaf Clover

-----------------------------------------------------------------

  • Member since
    January 2009
  • From: Bakersfield, CA 93308
  • 6,526 posts
Posted by RR_Mel on Wednesday, May 30, 2018 6:25 PM

Henry
 
I separated the LED leads with a small piece of paper and covered them with a thin layer of CA.  At 4 volts it doesn’t take much to stop a short.  That worked good for the floor lamp too, then three somewhat heavy coats of primer.  After some sanding it was ready for paint, Decoart Dazzling Metallics Gold Craft Acrylic paint.
 
 
Mel
 
 
My Model Railroad   
 
Bakersfield, California
 
I'm beginning to realize that aging is not for wimps.
 
Moderator
  • Member since
    June 2003
  • From: Northeast OH
  • 17,200 posts
Posted by tstage on Wednesday, May 30, 2018 5:50 PM

Nicely done, Mel! Yes

Tom

https://tstage9.wixsite.com/nyc-modeling

Time...It marches on...without ever turning around to see if anyone is even keeping in step.

  • Member since
    December 2015
  • From: Shenandoah Valley
  • 9,094 posts
Posted by BigDaddy on Wednesday, May 30, 2018 5:43 PM

It is cool! How did you insulate the led leads?

Henry

COB Potomac & Northern

Shenandoah Valley

  • Member since
    April 2013
  • 917 posts
Posted by Southgate on Wednesday, May 30, 2018 5:22 PM

Pretty cool!

  • Member since
    July 2007
  • From: Yorkton, Sk, Cnd
  • 441 posts
Posted by wvg_ca on Wednesday, May 30, 2018 5:06 PM

very nice, should look good  !

  • Member since
    January 2009
  • From: Bakersfield, CA 93308
  • 6,526 posts
1:87 scale Working Table Lamp
Posted by RR_Mel on Wednesday, May 30, 2018 4:24 PM

I’ve been experimenting making 1:87 table lamps.  I started out using 5mm LEDs and that went pretty well.  The more I got into it the better they looked.  At this point I’m using 3mm Warm White LEDs with a 1KΩ resistor at 4 volts, the LED draws 1.2ma.
 
I think my pictures explain the construction of my table lamp.
 
 
 
 
 
By leaving the LED leads long and cutting the bead in half and moving it to the bottom to form a base it becomes a floor lamp.
 
   
 
 
Mel
 
 
My Model Railroad   
 
Bakersfield, California
 
I'm beginning to realize that aging is not for wimps.
 

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!