Hi all!
I did this quick painting/weathering for a friend of mine.
It was an unpainted Walthers kit.
He had no decals for it, so I painted the logos on.
He only have to install all the handrails and ladders.
I weathered it from a photo.
Swedish Custom painter and model maker. My Website:
My Railroad
My Youtube:
Graff´s channel
That looks great, Graff. Living in Wisconsin, in the USA, I still see one of these every once in a while.
Mike.
My You Tube
Nice work on the scenery. The work's a bit much for me, but who am I to judge. I read that most of the weathering goes from top to down, so the weathering is more pronounced at the top and trickles downward as rain hits with some residue close to the bottom from the track.
GraffenHe had no decals for it, so I painted the logos on.
kasskaboose I read that most of the weathering goes from top to down, so the weathering is more pronounced at the top and trickles downward as rain hits with some residue close to the bottom from the track.
It looks like he based it on this photo...
http://kohlin.com/200703/20070307_003_Soo16846_AltoonaWI_1000.jpg
Inside the boxcar, the lower areas get banged up more than the upper areas, simply because there's more stuff down low. Dented areas of sheet metal are more likely to start rusting than undamaged areas, hence more rust down low.
Steve S
If that is your "quick" weathering, I'd like to see your slow stuff! Jokes aside, that is excellent work. Could you explain a bit more how you painted the lettering?
Simon
chutton01 Graffen He had no decals for it, so I painted the logos on. You painted the "SOO" "LINE" wording then, correct? Line-work looks pretty clean, presuming you wanted a faded look. Did you use a stencil, or masking, or some other technique?
Graffen He had no decals for it, so I painted the logos on.
You painted the "SOO" "LINE" wording then, correct? Line-work looks pretty clean, presuming you wanted a faded look. Did you use a stencil, or masking, or some other technique?
I found a HO scale drawing online that had the Soo line text on it. So I just printed it out and cut out the letters as a mask.
Steven S It looks like he based it on this photo... http://kohlin.com/200703/20070307_003_Soo16846_AltoonaWI_1000.jpg Steve S
Yes, that's the one. I know it isn't right for this model, but I liked the way it looked.
snjroy If that is your "quick" weathering, I'd like to see your slow stuff! Jokes aside, that is excellent work. Could you explain a bit more how you painted the lettering? Simon
It took roughly 3 hours, including the base painting....
This took a "bit" longer:
These two took a day and a half each. I painted AND weathered them on a hobby expo during a weekend.
Graff,
Now that's what I'm talking about for weathering a loco. Of course my rolling stock gets far more 'love' but I like your work. Def you need to tell us how you did that.
Steven S kasskaboose I read that most of the weathering goes from top to down, so the weathering is more pronounced at the top and trickles downward as rain hits with some residue close to the bottom from the track. It looks like he based it on this photo... http://kohlin.com/200703/20070307_003_Soo16846_AltoonaWI_1000.jpg Inside the boxcar, the lower areas get banged up more than the upper areas, simply because there's more stuff down low. Dented areas of sheet metal are more likely to start rusting than undamaged areas, hence more rust down low. Steve S
kasskabooseHere's a great book describing how to weather a box car.
Did you compare the photo of the model to the photo of the actual box car? This is an excellent weathering job done by an expert painter. If you want to offer advice on a model like this, you need to show us what you have DONE, not what you have READ.
I have the right to remain silent. By posting here I have given up that right and accept that anything I say can and will be used as evidence to critique me.
Graffen, those trucks are a piece of art... Care to explain what you did for that?
Nice work Graff!
The box car matches the prototype perfectly IMHO.
The switcher trucks are incredibly well done!
Dave
I'm just a dude with a bad back having a lot of fun with model trains, and finally building a layout!
Awesome job Graff!
On all counts, very good job, and especially good job on the roof, and those switcher trucks look almost too real!
Very impressive!
Ricky W.
HO scale Proto-freelancer.
My Railroad rules:
1: It's my railroad, my rules.
2: It's for having fun and enjoyment.
3: Any objections, consult above rules.