Question on BLI 2-6-6-4 Class A

[Anonymous]

Most important two things slow/and clearence.Although it will run around 18 in it really dosen't look very good doing so.If you run NMRA 5 and 7 in track centers on double track main there better not be any oncoming traffic in a 18 in radius turn or you will be calling out the brownhoist to put something back on the rails.I have had mine since last christmas and the N&W knew what it was doing when they called it a Class A it sure is a Class act.Bli has done them proud.

[Anonymous]

Even on my 24" radi curves, the "A" has significant cab over hang. She'll tilt far out. You better check your outer clearance.

[Anonymous]

Very Slowly. If you use 100 track I think it will run a little better than on code 83.

[Anonymous]

Thanks! [:D]

[Anonymous]

I have one and It will navigate my 18'' radius curves without a problem.

[rrinker]

Probably not without some sort of interference, or, with the long tender, derailing of any cars it is trying to pull.

[Anonymous]

Does anyone know if it can operate on 18" radius?
BLI recommends a 22" but sometimes the engines can run on smaller.

Thanks,
CrazyShay