Jim
Hey Richotrain! I resemble that remark!
But I didn't delete any comment! Lol, I'm still celebrating that I can now make my links clickable again!
Yes, "AntonioFP45" can be as much of a simpleton as Herman Munster, but during these stressful geopolitical times, I often find that it's fun to celebrate even the simplest things in life! (such as making MRR Forum links clickable!!!!!!!!)
https://www.youtube.com/watch?v=qK_nsP13g8A
I notice that our moderator is quiet. Hopefully he passes this issue onward to the wise and powerful gurus over at Kalmbach.
richhotrain Nah, I didn't mean it that way, Frank. It was more a matter of scolding Antonio for deleting what surely was an incisive comment on your part. Rich
Nah, I didn't mean it that way, Frank. It was more a matter of scolding Antonio for deleting what surely was an incisive comment on your part.
Rich
"I like my Pullman Standards & Budds in Stainless Steel flavors, thank you!"
I notice that when you click on the Insert/Edit Link, it does not add the URL before and after the link. So, I tried to insert it manually, but it didn't work. Dunno, this forum software leaves a lot to be desired.
Alton Junction
richhotrain incisive comment on your part. Rich
I like that.....LOL I was also kidding....shouda', woulda', coulda', put an emoticon in the ''sorry''... this one!? or dis' one!?
''Merry Christmas"
Take Care!
Frankie and Spooky
richhotrain zstripe Deleted: By Op. Take Care! Frank Uh Oh, Frank got deleted by the OP. Nice going, Antonio. Rich
zstripe Deleted: By Op. Take Care! Frank
Deleted: By Op.
Frank
Uh Oh, Frank got deleted by the OP.
Nice going, Antonio.
OP means.....Me....probably should have just put Poster.
Sorry...Your wish didn't come true Rich.
I decided there was enough advice on the subject.
BTW: A tip...don't use the ''Insert/Edit'' link icon. I never do and it always works.
Deleted: By Poster.
Well, I [re]learned a work around from Marlon (Medina1128):
(url=http://cs.trains.com/mrr/f/88/p/247876/2764887.aspx#2764887)How do you make MR forum links clickable(/url)
Replace the parentheses for brackets and you get this:
How do you make MR forum links clickable
Thanks, Marlon!
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
gmpullman This comes up often enough that it should be included in the "cs.trains forum 101" sticky along with how to post photos. http://cs.trains.com/mrr/f/88/p/247876/2764887.aspx#2764887 Happy Holidays, Ed
This comes up often enough that it should be included in the "cs.trains forum 101" sticky along with how to post photos.
http://cs.trains.com/mrr/f/88/p/247876/2764887.aspx#2764887
Happy Holidays, Ed
This comes up often enough that it should be included in the
"cs.trains forum 101" sticky along with how to post photos.
richg1998 BroadwayLion Apparently it must be a simple and valid URL with no unrecognized extensions. Elias with Ramu htm, html, jpg, etc are ok, .aspx is not. ROAR Windows convinced me to switch to Firefox browser many years ago. The Add-On's stop a lot of Pop Ups and Videos. I know many who have done the same. Rich
BroadwayLion Apparently it must be a simple and valid URL with no unrecognized extensions. Elias with Ramu htm, html, jpg, etc are ok, .aspx is not. ROAR
Apparently it must be a simple and valid URL with no unrecognized extensions.
Elias with Ramu
htm, html, jpg, etc are ok, .aspx is not.
ROAR
Windows convinced me to switch to Firefox browser many years ago. The Add-On's stop a lot of Pop Ups and Videos.
I know many who have done the same.
I've never been a real fan of IE so I've been using Firefox (since release V3.x) for the same reasons you've mentioned, Rich. The newer Microsoft Edge is okay and has some pluses. I mainly use it for quick news updates but primarily use Firefox for browsing the internet.
You got me, Rich. Forum-to-forum links work when you do what you just did using the actual URL as the link. Not so if you link the address with a word or words - e.g. using the Insert/edit link icon.
richg1998 The last forum upgrade a couple years ago was not very good. The icon rarely works so I do it manually like we use to have to do in the past. Works every time. Spell check does not work in all forums either. Rich
The last forum upgrade a couple years ago was not very good.
The icon rarely works so I do it manually like we use to have to do in the past. Works every time.
Spell check does not work in all forums either.
http://cs.trains.com/mrr/f/88/t/252881.aspx
So, that didn't work. How about Rich's method?
Well, I'll be. So how come the stupid forum software can't do that?
If you ever fall over in public, pick yourself up and say “sorry it’s been a while since I inhabited a body.” And just walk away.
The Route of the Broadway Lion The Largest Subway Layout in North Dakota.
Here there be cats. LIONS with CAMERAS
Microsoft is getting rid og Internet Explorer, their new entry is Microsoft Edge, it has a 100% different engine in it.
BroadwayLion Hit and Miss? First you write the text that you want to click on, such as BroadwayLION. Highlight that text and click the link Icon, and paste the URL in there. But if you wish to refrence to THIS FORUM, it will not work. ROAR
Hit and Miss?
First you write the text that you want to click on, such as BroadwayLION.
Highlight that text and click the link Icon, and paste the URL in there.
But if you wish to refrence to THIS FORUM, it will not work.
You're correct about linking to anything on this forum, Lion, but it is hit 'n miss with other sites. Today the link icon method actually works properly. Later on today?...or, next week? - that's another story.
BroadwayLionHit and Miss?
Mostly miss, some web browsers, like IE, do not even show the link icon. I feel lucky to get smilies
George In Midcoast Maine, 'bout halfway up the Rockland branch
Super, it works!
As a teen would say: Rich, Tom both of you are "Bosses!" I went back over to the "Help with metal finish on Amtrak car" thread, applied the brackets to those links, and "Voila!" the links are working. I'll use that much simpler method from now on.
Thank you
Antonio,
Ever since the last upgrade it's been hit-or-miss with either posting clickable links or using the "Add Quote to your Post" feature. When it doesn't work I use the bracketed method that Rich outlined above for links. For quotes I use a similar bracketed code:
(quote user="forum name")...message...(/quote)
All you have to do is replace the parentheses for brackets, paste the forum member's forum name inside the quotation marks, and paste the quoted message that you want to reference to in between. If posted properly it will look like this:
forum name...message...
If you comment to it be sure that your comments are posted after the [/quote].
richg1998 Works every time. [url]http://cs.trains.com/f/[url]
Works every time.
[url]http://cs.trains.com/f/[url]
Nice and simple. What is needed for "open in new window?"
Conemaugh Road & Traction circa 1956
Spell check does not work in all forums either. Rich
Hello,
A bit frustrated here.
Over the years, like a number of modelers here trying to help others, I've sometimes posted links to other threads on this forum that contains the detailed information that a poster is seeking.
For the past 6 months it has been hit or miss for me! Sometimes it works, sometimes it doesnt! Just now I tried to help CJTrainGuy with a couple of links regarding metalizing with Alclad2. The links arent' working. Is it me or this forum's software?
This is how I've been proceeding:
1. I tab open a new window.
2. Look for the specific past thread.
3. After finding that thread, I go up to its URL bar, highlight the thread and hit Control C.
4. I tab back over to the current thread, write a "Reply" comment, and below it hit "Control V", and the thread's URL is pasted on.
5. Next, I highlight that newly pasted thread's URL, click open the "Insert/Edit" link icon and paste that thread's URL into the blank URL box.
6. I then click the "Target" drop down menu and select "Open in New Window". I do, and the link turns blue, and is now underlined. All looks good.
7. Hit update Thread. I test it and..................
Again, as I stated, sometimes it works sometimes it doesn't. Any tips or info would certainly be appreciated.