I think its a 74' so right time frame. Should have just let them have Afghanistan back then, and that whole part of that world. Just a bunch of backwards religious people fighting over sand and worthless mountains, all well I guess they will eventually takecare of themselves.
well I just couldn't resist ,haven't seen that insignia since the 70's -80's Olympics ,the one we boycotted cause they put troops in Afghanistan. maybe in hind site we should of let em have it....all in fun ..Jerry
Oh yes I was wondering if that would pop up haha, its just an old plastic Russia Lomo. The cameras are know for doing interesting things to film when doing photography.
SP4440; this is an interesting car indeed , But com-rad is that a Soviet star with hammer & sickle in the upper left hand corner ? now that is interesting ,as I sit here trying to figure out what it is attached to,lets see a canteen full a vodka? ,a microfilm case?,a missile key case? (I'm joking here) but what is it ? ...Jerry
G Paine Have you looked at Northwest Shortline? They may have a driver set that you can drop in as a replacement. If you do not see what you need, use their Contact us page and explain your problem http://www.nwsl.com/
Have you looked at Northwest Shortline? They may have a driver set that you can drop in as a replacement. If you do not see what you need, use their Contact us page and explain your problem
http://www.nwsl.com/
Thanks for the suggestion. I know of them, but I haven't seriously looked for this model - the truth is I have to question if this is the right model to start sinking cash into. It needs a lot of of modifications to look like a real CV 0-8-0, so I'm still thinking it would be better to start with a better base model for my purposes.
However, if you're running higher iron than the code 70 and 55 I have on my layout, I wouldn't over look these models as a great, inexpensive DC or DCC workhorse (it runs much better in DCC, thanks to being able to tweak the motor settings).
I'm trying to model 1956, not live in it.
hi, this photos were from my in progress layout at my trains club! taken with celphone
hope you like them!
460 pulling old time Billboards
51% share holder in the ME&O ( Wife owns the other 49% )
ME&O
Scarpia It actually runs and sounds great in DCC, the problem and why I'm sidelining it, is that the IHC wheel flanges are problematic on my layout. I've tried grinding, but I think instead I'll use the lessons I've learned from this model, and start in earnest on a better base model (like the Proto 0-8-0)
It actually runs and sounds great in DCC, the problem and why I'm sidelining it, is that the IHC wheel flanges are problematic on my layout. I've tried grinding, but I think instead I'll use the lessons I've learned from this model, and start in earnest on a better base model (like the Proto 0-8-0)
Great shot Scarp
The Proto 0-8-0 is a great running model, although a little light footed.
"The true sign of intelligence is not knowledge but imagination."-Albert Einstein
http://gearedsteam.blogspot.com/
Well for the first time I kit bashed a car, but I think more bashing happened then anything... so its a little ruff. This is my take on a modern power car. Had this silver, WAY to old and globed no matter what. So I am still working on this few more detail and bits I am going to put on after I get better paint and fix the poor spots this week.
[View:http://cs.trains.com/TRCCS/themes/trc/utility/:550:0]
George In Midcoast Maine, 'bout halfway up the Rockland branch
Sailormatlac We are actually working on the scenery, particularly CPR Wolfe's Cove tunnel with it's caracteristic road overpass. Matt
We are actually working on the scenery, particularly CPR Wolfe's Cove tunnel with it's caracteristic road overpass.
Matt
I like and am interested in your work, looks great so far! Kind of a sharp turn from the back wall thru the tunnel (kidding, you either have a turnout, dead end or crossing under there)
Inspired by Addiction
See more on my YouTube Channel
Good stuff folks..The first struture on the newish C&O Hawks Nest Branch has been 'installed':
Now for a 'bazillion' trees..
Charles
Nice work again everybody!
Started to paint an undec P2K FB2 in CNR Green & Yellow scheme.
Proudly modelling the Quebec Railway Light & Power Co since 1997.
http://www.hedley-junction.blogspot.com
http://www.harlem-station.blogspot.com
Not much from me this week, as I was "tinkering" with weathering. I had overshot/applied too much weathering to my grain hoppers, so I removed some of it with a cotton ball dampened with rubbing alcohol. The dampened cotton ball slightly washed and faded the green body and white lettering; the brown dirt/weathering also remained in the grooves/skin seams and I think it looks better.
These rib side hoppers were airbrushed with a light coat of gray (toned down the black lettering) and then airbrushed once between the ribs with light brown.
Here's a new addition to the roster. Bought this blue box kit on that "auction/bidding" web site for less than $10. Installed kadee #5 couplers and intermountain 33" metal wheels. All other parts/details are stock. No intention of weathering (yet).
Looking good so far guys. Keep the photos and ideas coming.
Here's one from the BRVRR. Couldn't find the good camera so the quality isn't as good as it should be.
NYC Local passes the Olive St. crossing on the Black River Valley layout.
This is always the best thread of the week. Keep up the good work everyone.
Remember its your railroad
Allan
Track to the BRVRR Website: http://www.brvrr.com/
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
Chuck ... Thanks for commenting. The buildings are under-sized and selected to force perspective. The houses are inexpensive ones from a "dollar store". The church is a Hallmark Christmas tree ornament. I added paint as needed and used flat matte spray to each building. Roads and covered bridge are undersized. Not seen are some N scale vehicles on the road that curves behind the trees.
GARRY
HEARTLAND DIVISION, CB&Q RR
EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU
Heartland Division CB&Q Here's a 4-8-2 rolling downgrade through Valley Heights.
Here's a 4-8-2 rolling downgrade through Valley Heights.
Garry - I Like this scene. Are the buildings in the background N scale to add a little 'forced prospective'?
I love what you done with the loco Scarpia, even if the wheels are giving issues.
Ray: The power station looks to be a sizable one...did you do anything with the interior yet?
Ollevon, Curt: Both of your layout shots are always a wonder for me...good work!!
Any argument carried far enough will end up in Semantics--Hartz's law of rhetoric Emerald. Leemer and Southern The route of the Sceptre Express Barry
I just started my blog site...more stuff to come...
http://modeltrainswithmusic.blogspot.ca/
I'm finally putting this project to rest - a quick and dirty DCC upgrade of an IHC 0-8-0. Factory paint and decals, just converted to DCC (sound) and some weathering added.
Before (new from the box).
now (just 3 short years later...)
Looks like a SLOW Weekend, so I'll Post a few of what I have been doing on the Seneca Lake, Ontario & Western...
About all I managed to have time to do this week is assemble a Steam Boiler for the Powerhouse on Bare Mountain. There will be 2 of these in the building to provide steam for the turbines and generators...
A bit closer up (so I can see where I screwed it up.... Next one I will do better).
The backside of it:
It is not finished yet as there will be some weathering and rust added, lots of piping, and a ladder be able to get up to the valves up on top and for service.
73
Ray Seneca Lake, Ontario, and Western R.R. (S.L.O.&W.) in HO
We'll get there sooner or later!
Ya Curt, looks like you & me where is everybody? Come on folks lets have some photo fun.
Not a lot of donors yet so here is my diesel servicing area with a H10-44 in attendance.
Curt Webb
The Late Great Pennsylvania Railroad
http://s1082.photobucket.com/albums/j372/curtwbb/
Thank you Curt, glad you liked it.
Sam
Garry & DJ- Thanks. Your modeling is always first rate.
Ollevon- That is a incredible waterfront.
I just love that yard shot Grampy here is one from my boat yard. Sam
Very nice steam shots, Curt and Garry.
Just a yard shot. DJ.