Bought this one from a guy through a neighbour who painted it for the seller.
Liking the D&H lighting stripe in CP colours
Brought to you by the letters C.P.R. as well as D&H!
K1a - all the way
I came across pictures of Bob's F-unit in an old magazine I acquired not too long ago. I was shocked & pleased to see it here.
This current caboose, I know i know, it's not protoypical, but it was my Dad's so I'm keeping it.
The caboose was origionally from Roco but the frame & coupler housings had taken a beating over the last 30 years so when I was looking at it one evening, I wondered if the body would fit on an Athearn frame with, which it did! No modification needed. Fit just like the undec-Athearn body..
This Athearn offering has been in the family almost as long. It has been my only attempt at weathering, using a brush & some paper towel.
Gordon
UncBob Could be It has been over 14 years and memory at 74 sometimes plays tricks
Could be
It has been over 14 years and memory at 74 sometimes plays tricks
At least yours is still around to play tricks.
Wayne
doctorwayne Bob, are those MDC/Roundhouse cars now considered part of the Blue Box line? They're very similar in construction to Athearn cars and they did, for a time, use a predominantly blue box. I have some of the same cars, although mine have been downgraded to work train service: Wayne
Bob, are those MDC/Roundhouse cars now considered part of the Blue Box line? They're very similar in construction to Athearn cars and they did, for a time, use a predominantly blue box. I have some of the same cars, although mine have been downgraded to work train service:
51% share holder in the ME&O ( Wife owns the other 49% )
ME&O
Bob ... I'm impressed with th old F7 too. Interesting you powered it. ... Also, I'd like to thank you for your rail photography website which is very helpful.
Below is a Geep made from Athearn a common Blue Box loco. It is detailed and painted for Northern Pacific,. The grain loading box cars are also Blue Box, and I am not aware of any other such cars available.
GARRY
HEARTLAND DIVISION, CB&Q RR
EVERYWHERE LOST; WE HUSTLE OUR CABOOSE FOR YOU
Now that you described how you built it, that F-7 looks easier to build now. I'm definately going to try it for myself (only, not on a Blue-box loco, but, insted, Mabe on that old Tyco that's been sitting around for as long as I can remember)
It's also really neat that the F-7 can run, too. I don't know if I'll do that with my model or not, but I'll consider it.
Thank You for the insperation.
the North East Rail Modeler Railphotog: Wow! That's some work there,Railphotog. Do you have any more photos? Can you describe how you built that exelent model?
Railphotog:
Wow! That's some work there,Railphotog.
Do you have any more photos? Can you describe how you built that exelent model?
Well it was quite a long time ago, but the basics should be evident - I cut away portions of the F-7 shell with a razor saw and/or a hobby knife, made the side framing with Plastruct angles. I cut out the roof openings and filed/sanded them down to give a prototypical thickness. The diesel engine inside was scratchbuilt using various plastic pieces from the junk box, I imagine one of the engine kits put out by Walthers would make it easier these days. A styrene floor needed to be placed in the engine room first, and also a bulkhead between the cab and the engine space.
The model was originally made using a dummy Athearn unit, but I wanted to enter it in an NMRA contest, and engines need to be powered to enter, so I added a self-propelled PFM "SPUD" power truck on the front. Yes - the model actually runs!
Can't think of any other specifics, ask if you have questions.
Bob Boudreau
CANADA
Visit my model railroad photography website: http://sites.google.com/site/railphotog/
What a remarkable thread! impressive work, everybody!
There is an Athearn 62' tank car in this photo. It was kit bashed into the twin, upright storage tanks. The car body was sawed in half, and details were added. Other "Blue Box" models are two of the tank cars, and a Piggyback trailer on the highway bridge. If there were a similar thread for old Tyco stuff, I would include the grubby Burlington company-service tank car at the left.
The steel mill utilizes old Baldwin switchers acquired from GN and SP. The models are "Blue Box" units with DCC installed along with headlights at each end. The gondolas being switched at the rolling mill are also "Blue Box".
Just found this thread. Very cool. I'm just starting out-don't even have a layout plan done. I thought I would start on getting my inventory started. 95%+ are BB's. I love them. They're fun to put together. I'll try to get some pics posted.
twhite ....Good stuff.
....Good stuff.
I agree, Tom, both with regards to Athearn Blue Box stuff and to your photo.
Forty Niner .... As for your last set of photos, beautiful again as usual. I never get tired of looking at what you have done, do you hear that MR staff??? 5-6 pages at least??? Buy Lou Sassi some snow tires and send him north of the border as it's obvious drwayne isn't the only one showing some fine modeling here.
.... As for your last set of photos, beautiful again as usual. I never get tired of looking at what you have done, do you hear that MR staff??? 5-6 pages at least??? Buy Lou Sassi some snow tires and send him north of the border as it's obvious drwayne isn't the only one showing some fine modeling here.
Sorry, Mark, I somehow missed the above comment. While I'm very appreciative of your very kind words, and those of others, I don't think my layout is quite yet ready for "prime time". Besides, everybody here has already seen most of it (some might say too much of it) and those parts not seen are probably better left that way.
I don't do diesels, but there's a whole string of BB PFE reefers behind the Yellowstone at the top of the photo. I'd say that at least 60% of my large reefer fleet is Athearn, both older metal and BB. Good stuff.
Tom
Tom View my layout photos! http://s299.photobucket.com/albums/mm310/TWhite-014/Rio%20Grande%20Yuba%20River%20Sub One can NEVER have too many Articulateds!
Thanks! All I did was start it & others have helped make it an enjoyable thread. I showed my son with his first Blue Box in an earlier thread so why not get others to show there Blue Boxes too!
Great thread, one of the better I've seen around here in quite a while, kinda like the forum used to be.
"The true sign of intelligence is not knowledge but imagination."-Albert Einstein
http://gearedsteam.blogspot.com/
Railphotog
A couple of trailers to start
South Buffalo SW1500
SW1200
Railphotog Metro Red Line: Your photos are too red/orange, you need to set your camera to "tungsten" lighting to make it go away. Check your manual or in camera menu for White Balance. If you can do it, remember to turn it back to Auto when done taking indoor photos by incandescent lights! More photo tips in my model railroad photography website, in my signature.
Metro Red Line: Your photos are too red/orange, you need to set your camera to "tungsten" lighting to make it go away. Check your manual or in camera menu for White Balance. If you can do it, remember to turn it back to Auto when done taking indoor photos by incandescent lights!
More photo tips in my model railroad photography website, in my signature.
Thanks. I know next to nothing about that stuff, I only used a point-and-shoot digital back then to make "farewell" pics before I dismantled the old layout. Actually they look better "yellow" since turning on the flash exposes all my ugly modeling flaws :)
My oldest Blue Box Gondola I had detailed with grabs and steps back in the mid 1960s. Same here with the Santa Fe box car, I weathered both the gondola and box car because the printing jobs on Athearn cars just wasn't all that great back then. Really!My wonderful old Athearn SD9 that was one of the first test shots off the production line. The engineer that designed the running gear, John Munson also added ball bearing's to the motor and the first flywheels to be used on an Athearn engine.
Bob;
Your photography is great, as usual! One day, one day, I'll be able to have shots like yours.
Back to the subject at hand.
Here is a BB SW-1500 "backdated" to a passable SW-1000 that I did for a friend who models the CB&Q.
Here is a flat car with a load
Looks like I gotta "repaint" the strapping.
A Southern RR Caboose
I have a few more photos I could show, but can't locate them in my computer to put online yet.
I may have to take them!
Carey
Keep it between the Rails
Alabama Central Homepage
Nara member #128
NMRA &SER Life member
I've since left HO scale for N four years ago, but I've kept a few of my favorite Athearn BB locos just for keepsake, Here they are on my old layout (1988-2006):
GP38-2 (directional lighting kit installed).
SW1500
AMD-103 (since sold at a Swap Meet)
I love the blue box and roundhouse kits they are great for weathering and modifying here are a few of mine:
Regards Jon.
I understand Wayne, the Bachmann cabs are a finer looking item than the Genesis cabs. I only offered that as Bachmann parts are like getting ahold of dinosaur "lips" therefore I have scavaged every Spectrum steam part I can lay my hands on for various little projects of mine.
That's kind of a "bite" that you have to buy the entire boiler just to get the cabs but..................they aren't in the "parts" business.
Used to be able to get any part you wanted from Proto and very reasonably priced as well, now you might as well "wish upon a star" if you want any Proto parts. Personally I feel as though they are missing a good opportunity there but then of course "I" don't make the decisions and really don't care to get involved in that aspect of the hobby even if I had the chance to do it again.
P.S. As for your last set of photos, beautiful again as usual. I never get tired of looking at what you have done, do you hear that MR staff??? 5-6 pages at least??? Buy Lou Sassi some snow tires and send him north of the border as it's obvious drwayne isn't the only one showing some fine modeling here.
Mark
Forty Niner Wayne, Let me know if you need some USRA "cabs" as I have some spare Genesis versions assuming those are the cabs you planned to use. Also I would love to get my hands on any extra of those Bachmann cabs, again assuming you have no plans for them. I have some of the Bachmann SY 2-8-2's and feel they could be converted to really nice "American" looking engines without that many modifications but the cabs and the tenders are the biggest "sore thumbs" in my book. Let me know if you have any interest in this direction, Mark
Wayne,
Let me know if you need some USRA "cabs" as I have some spare Genesis versions assuming those are the cabs you planned to use. Also I would love to get my hands on any extra of those Bachmann cabs, again assuming you have no plans for them.
I have some of the Bachmann SY 2-8-2's and feel they could be converted to really nice "American" looking engines without that many modifications but the cabs and the tenders are the biggest "sore thumbs" in my book.
Let me know if you have any interest in this direction,
Thanks for the offer, Mark, but I have a couple of Bachmann USRA cabs for those locos. The Bachmann Consolidation cabs are available from Bachmann, although they sell you the cab and the boiler, plus that big weight that fits inside the cab - I'm going to have so many boilers left over that I'm thinking of adding a boiler works to my next industrial area. They'd make interesting flat car loads, although would require modifications to make them suitable as stationary boilers.
Found some more!
And now that my PA's are tuned up and running, a video!
Railphotog When I got back into the hobby about 20 years ago, I'd pick up used Athearn models on the cheap at local train shows. Since I didn't pay much for them, I had no problems cutting them apart, modifying them, etc. Over the years I've made many models, and had a great time learning techniques and trying out new ones. I doubt if I'd be interested in paying $200.00 or more for a recent Athearn diesel and doing something drastic to modify it. Its a whole lot different from bashing a $15-20 model.
When I got back into the hobby about 20 years ago, I'd pick up used Athearn models on the cheap at local train shows. Since I didn't pay much for them, I had no problems cutting them apart, modifying them, etc. Over the years I've made many models, and had a great time learning techniques and trying out new ones. I doubt if I'd be interested in paying $200.00 or more for a recent Athearn diesel and doing something drastic to modify it. Its a whole lot different from bashing a $15-20 model.
You're right, Bob: if the supply of used Athearn cars and locos ever dries up, the hobby will be much the poorer for it, in my opinion.
Love the job you did on those locos, especially the "Sweep".
Dr. Frankendiesel aka Scott Running BearSpace Mouse for president!15 year veteran fire fighterCollector of Apple //e'sRunning Bear EnterprisesHistory Channel Club life member.beatus homo qui invenit sapientiam
Here are a few whose images I already have in my Photobucket account: