Trains.com

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Making places for frogs to sit..

4247 views
21 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2006
  • From: Fountain Valley, Ca.
  • 763 posts
Posted by Bob grech on Sunday, July 25, 2010 11:04 PM

 Wow Jarrell, that looks great. You've sure come a long way these past few years. Your scenery is up there with the best of them.... good work!

Have Fun.... Bob.

  • Member since
    February 2004
  • From: Knoxville, TN
  • 2,055 posts
Posted by farrellaa on Sunday, July 25, 2010 3:45 PM

Nice job and nice water. What are you using for the water? I have a spot for this on my layout but my water hasn't turned out very good. I used WS water.

Bob

Life is what happens while you are making other plans!

  • Member since
    March 2010
  • From: Deming NM
  • 94 posts
Posted by widetrack on Sunday, July 25, 2010 3:01 PM

This is an interesting topic, especially since I had a frog outside on my patio this morning as I was crushing soda cans. a real frog not the kind on our layouts. He/she? was just sitting in the middle of my patio watching what I was doing, after about five minutes when I looked over it had disapeared. Probably went back into his hidey hole for the day.     

  • Member since
    October 2009
  • From: Minneapolis, MN
  • 122 posts
Posted by ChevelleSSguy on Sunday, July 25, 2010 10:55 AM

I remember an article in MR many years ago about a guy whom made lily pads on his water by taking a drop of green paint while the water was still wet and put a small droplet onto the water. The green droplet did not disolve into the water (resin I think it was). It appeared to be as if a drop of water landed on freshly waxed paint. Then with both the green droplet still wet and the water still wet. He would then take a pin and poke the green droplet all the way to the bottom of the water and it would actually form almost a small trail of green water down into the water as if it was the "stem" of the lily pad and not just a green drop floating on the top.

 One of the slickest and more creative things I have seen in a long time. The author turned out to be a local guy and earlier this year. I got the privlege to see his layout in person and looking at those lily pads in person, it was really quite something to see it for real. 

  • Member since
    September 2004
  • From: Dearborn Station
  • 24,281 posts
Posted by richhotrain on Saturday, July 10, 2010 12:30 PM

Hamltnblue

I cant keep frogs on the layout. because of scale the spiders keep eating them. Whistling

You guys have been eating feathers for breakfast today.  LOL

Alton Junction

  • Member since
    September 2004
  • From: Germany
  • 1,951 posts
Posted by wedudler on Saturday, July 10, 2010 11:14 AM

 I've seen a frog just under the pads. Smile

Wolfgang

Pueblo & Salt Lake RR

Come to us http://www.westportterminal.de          my videos        my blog

  • Member since
    December 2001
  • 3,139 posts
Posted by chutton01 on Saturday, July 10, 2010 10:53 AM

jacon12
I've done a google search for HO scale frogs, the croaking kind not the turnout kind... and all I can find are the latter.  Where oh where is Kermit when you need him..  Guess I'll just have to make one out of.....  hmmmmm....  on second thought my pads will just have to remain frogless.


I resurrected this thread because I was going thru some old Walthers 'Fearless' Flyers before tossing them when I saw this - it's Busch offering the frogs (among other small animals), not Presier.

I rather hope the picture used to illustrate the set doesn't show the figures actual size...

<Don LaFontaine voice> "In A World Where hornets are the size of frogs and lizards..."</Don LaFontaine> Shock

  • Member since
    November 2002
  • From: US
  • 4,648 posts
Posted by jacon12 on Tuesday, July 6, 2010 8:06 AM

I've done a google search for HO scale frogs, the croaking kind not the turnout kind... and all I can find are the latter.  Where oh where is Kermit when you need him..  Guess I'll just have to make one out of.....  hmmmmm....  on second thought my pads will just have to remain frogless.  Maybe I'll just mount a little speaker under the pond and play swamp sounds.

Appreciate it everybody!

Jarrell

 HO Scale DCC Modeler of 1950, give or take 30 years.
  • Member since
    July 2006
  • From: 4610 Metre's North of the Fortyninth on the left coast of Canada
  • 9,352 posts
Posted by BATMAN on Monday, July 5, 2010 11:55 PM

This is a very ribbiting thread. Big Smile

 

                           B

Brent

"All of the world's problems are the result of the difference between how we think and how the world works."

  • Member since
    February 2005
  • From: Southwest US
  • 12,914 posts
Posted by tomikawaTT on Monday, July 5, 2010 11:53 PM

Hamltnblue

I cant keep frogs on the layout. because of scale the spiders keep eating them. Whistling

Maybe you could get the spiders to wear frog suits...

Chuck (Modeling Central Japan in September, 1964 - with several dessicated arachnid corpses on the layout)

  • Member since
    April 2008
  • From: Columbia, Pa.
  • 1,592 posts
Posted by Grampys Trains on Monday, July 5, 2010 11:36 PM

 Excellent modeling of lily pads, Jarrell. Thanks for sharing your technique. DJ.

  • Member since
    June 2006
  • From: Maryville IL
  • 9,577 posts
Posted by cudaken on Monday, July 5, 2010 9:53 PM

  Nice looking pad you got there Jarrell

I hate Rust

  • Member since
    November 2002
  • From: US
  • 4,648 posts
Posted by jacon12 on Monday, July 5, 2010 9:17 PM

You're welcome Packer.  I'm all for techniques that are simple and easy to do.

Jarrell 

Packers#1

 Jarrel, thanks for passing that technique along; I have a drainage pond on the layout that lilly pads will make much better when I can rework it.

 HO Scale DCC Modeler of 1950, give or take 30 years.
  • Member since
    May 2008
  • 4,612 posts
Posted by Hamltnblue on Monday, July 5, 2010 7:57 PM

I cant keep frogs on the layout. because of scale the spiders keep eating them. Whistling

Springfield PA

  • Member since
    February 2008
  • From: Memphis, TN
  • 3,876 posts
Posted by Packers#1 on Monday, July 5, 2010 7:51 PM

 Jarrel, thanks for passing that technique along; I have a drainage pond on the layout that lilly pads will make much better when I can rework it.

Sawyer Berry

Clemson University c/o 2018

Building a protolanced industrial park layout

 

  • Member since
    February 2002
  • From: Reading, PA
  • 30,002 posts
Posted by rrinker on Monday, July 5, 2010 7:39 PM

 Perhaps Preiser has HO frogs? They have every other animal....Big Smile

 

                            --Randy

 

 


Modeling the Reading Railroad in the 1950's

 

Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.

  • Member since
    November 2002
  • From: US
  • 4,648 posts
Posted by jacon12 on Monday, July 5, 2010 5:03 PM

tomikawaTT
As for the frogs, mine are about half-way between the stock rails...Whistling

 

Oh.. oh.. stop, you're killin' me!   Laugh

Jarrell

 HO Scale DCC Modeler of 1950, give or take 30 years.
  • Member since
    February 2005
  • From: Southwest US
  • 12,914 posts
Posted by tomikawaTT on Monday, July 5, 2010 2:14 PM

Nice technique!Thumbs UpApprove  Now, all I have to find on my planned scenery is a place where the water slows down enough to let water lilies grow...Blush

As for the frogs, mine are about half-way between the stock rails...Whistling

Chuck (Modeling the white-water country of Central Japan in September, 1964)

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, July 5, 2010 1:32 PM

jacon12
I think you'll find it super easy with the micro brush (thats really the key), just be sure to dip only the very end of the brush into the paint so as not to get too much.  'Course if you do, you'd just have a giant lilly pad.   Big Smile

 

They do grow 'em big in New Hampshire! Smile,Wink, & Grin

  • Member since
    November 2002
  • From: US
  • 4,648 posts
Posted by jacon12 on Monday, July 5, 2010 1:28 PM

 You're very welcome, Tyler.  I think you'll find it super easy with the micro brush (thats really the key), just be sure to dip only the very end of the brush into the paint so as not to get too much.  'Course if you do, you'd just have a giant lilly pad.   Big Smile

Jarrell

TrainManTy

I'm going to have to try that with my swamp area. Thanks for sharing.

 HO Scale DCC Modeler of 1950, give or take 30 years.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, July 5, 2010 1:23 PM

I'm going to have to try that with my swamp area. Thanks for sharing.

  • Member since
    November 2002
  • From: US
  • 4,648 posts
Making places for frogs to sit..
Posted by jacon12 on Monday, July 5, 2010 12:52 PM

I thought I'd pass along a simple little technique that a friend told me about, making lilly pads.  After seeing the retail price of the ready-made variety I gave it a try.

I think they look pretty good from a short distance..

and even closer...

After the 'water' had dried I used cheap craft-style paint

and one of those micro brushes that are typically used to apply glue..

dip lightly into the paint and use a straight up and down motion to place a small dap of paint on the water.  After that dried I repeated this with the lighter color green, using even LESS paint than before and not on every lilly pad.

Now.  Where's those frogs?

Jarrell

 

 HO Scale DCC Modeler of 1950, give or take 30 years.

Subscriber & Member Login

Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more!

Users Online

There are no community member online

Search the Community

ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT
Model Railroader Newsletter See all
Sign up for our FREE e-newsletter and get model railroad news in your inbox!