how many people model the midwest ?

[AltonFan]

When i finally get to building my layout, it will be based on the kind of railroading seen on the former C&NW Northwest Line and the communities that straddle the railroad all the way up the line.

[deevs]

I model Michigan.

[Hawks05]

my layout will kind of be midwestern. no specific roads as i buy what i like so there goes staying true to what ran through here. but i'll have some stuff relating to grain mostly as i'm a huge hopper fan.

i consider myself a midwesterner. i live in Wisconsin and i consider this the upper midwest. i always hated geography.

[Anonymous]

I live in Kansas, geographic region is the Plains states, Oklahoma, Kansas, Nebraska, North/South Dakota and will be modeling the ATSF,BN, SP and UP in the 80's around KCK/KCMO

[orsonroy]

Now how in the heck did this post get past me the first time?

I model the NKP in central Illinois, circa 1946-1950, between Peoria and Bloomington. Since the NKP in Peoria used the P&PU's facilities and yards, I'm also modeling several of the roads that connected there, like the P&PU, PT Co, PRR, P&E, IC, C&IM, TP&W, M&StL, CB&Q and IT. On the mainline, I've got live interchanges with the ATSF, P&E, TP&W, IC, GM&O and IT. (thankfully, most of these roads are represented by one engine and one caboose!)

[Anonymous]

I model the BNSF in a fictional setting in Central Oklahoma. I run my trains on a 4x8 foot layout with a grain elevator serving as a industry.

[simon1966]

CB&Q and the Wabash in the mines of central Illinois.

[Anonymous]

I grew up in the city (St.Louis), but spent about 20 years in rural Kansas along the UP, Rock Island/Burlington; and it later years the Kyle (operating former Rock trackage) and the BN. I saw a little ATSF in those years, but mostly lived North of their operating territory in the Sunflower State. I am currently modeling a rather generic midwest version of the ATSF, primarily industrial switching. I could get into Western Maryland, or the Pennsy, etc.; but I so much more familiar with the midwest and south plains areas that I feel more confident modeling what I know.

[traingeek087]

What: BN
Where: BN Ravenna sub in NE.
When: 1973-4-5
Why: Coal boom was started just before then. Lots of CBQ (my favorite railroad) Plus GN, SP&S, NP, and the new BN paint scheme. With interchanges with the RI and CNW/UP.
Size: 14x10 1/2

[CBQ_Guy]

I'm in the room prep (basement) stages of building a proto-lanced version of the CB&Q in the late 1960's just prior to the merger which created the BN. Basement area is roughly 24 by 38 feet. Location is on a rural section of the double track main "somewhere" between Chicago and Galesburg, Illinois. That part of the layout will come out of staging, run around three walls of the basement, and return to staging. The freelance part is off this main will start a fictionalized sub-division/branch of the "Q" called the "Illiniwek River Branch" which will serve a jointly owned Burlington/IC coal mine, as well as some rural Illinois towns along the branch. There will also be interchanges, some live and some not, with the TP&W/ATSF, IC, Rock Island, CNW, PC and possibly Milwaukee Road.

[Anonymous]

Someday I plan to model my fictional railroad, The Midwestern RR. It will run modern equiptment, but also plenty of steamers and fierst gen. diesels. I've already statred drawing track plans.

[XG01X]

An exIC coal branch now a shortline after the mine went bust. Main staples of traffic are corn, fert, plastics and a rock transload. Set in 04 so I can have those 5161 hoppers rollin' down the line. 2x20 with an Athearn SW1500, kitbashed Proto GP7M and I think I'm going kitbash a GP8.
Hey yellerock don't forget about the pennsy.

[Anonymous]

I try to model the Illinois Central and C & E I in the Vandalia/Salem Illinois area. I don't try to get it down to individual scenes--just a feel for the area. Early to mid 1960's

[Anonymous]

I model Free lance

DOGGY

[Anonymous]

I have always lived somewhere in Kansas. When I was a kid my Father worked for the AT&SF, the Panhandle Division I think it was called...so lots of Santa Fe on my small 4x8. The places are fictional, but the comodites are based on what we see here...Grain Elevators, Flour Mill, and some COOP type business. I am planning to someday get some of the UP comming through town someday...like those long coal trains.

[Anonymous]

I am in the rebuilding process of my layout due to more available space, I model in the 1960s - 1970s era Wisconsin . Mostly SOO LINE , but also have CNW , Along with a few fictional branch lines . Basicaly Ladysmith, Fort Atkinson, Jefferson, & Janesville are my main cities due to the many industries that were in these cities. But also have some small towns in between to give it that steam era look. WSOR will be added soon even though they are out of the era that I model.......OH Well. Kind of back to the future. The size is about 20' x 30' & am in the process of going DCC. "HAPPY RAILS"

[foxtrackin]

I am modeling the Nickle Plate Road in central Indiana. The main theme of the railroad is the yards in Frankfort Indiana in the 50's. I am doing the late steam and early diesel era. The lay out is in my basement in an area that is 52' x 14' in ho scale and I am using atlas code 100 track.

[Anonymous]

juby4life, if Iowa's rail history wuold have played uot that way, us hardcore Midwesterners would be laughing our tails off at Uncle Pete.! h would have got a taste of his own medicine, which UP thouroughly deserves anyway.

[Anonymous]

I'm planning on modeling the Conrail and Chessie lines that ran through Carthage in Cincinnati, Ohio. I lived in back of the National Distillers/Gilby's Gin plant(Conrail line) and got to see lot's of switching and loading of cars as well as a constant stream of trains running through as much as every half hour. The Chessie line which sits about 1 1/2 mile straight across from the Conrail had switches that went to stamping plants and trucking companies. Of course now all of this is owned by Norfolk Southern.

The National Distillers plant is now in the process of being torn down by Jim Beam as it has no use for that end of the plant. I went out there a couple of weeks before they started to dismantle parts of the buildings and took pictures to get an accurate layout as well as building construction and just recently was able to get a hold of a rail map of both lines. My Girlfreind thinks I'm crazy[:D]

[eng22]

I model Michigan. We are not included in the Midwest, or Northeast as we are a penninsula unto ourselves. [:D]] We are divided up by upper or lower.

[Anonymous]

I live in Iowa and I model the midwest. I model the CNW and The Rock in the blue scheme(see signature). BNSF does make run throughs if there is a problem on their tracks in southern Iowa and SP makes some appearances also. UP was gobbled up by the Rock before it had a chance to destroy CNW and the SP.

Oh and Cottonbelt819, there is a Route Rock N scale on ebay in the blue scheme.

Thanks,
Jeremy

[Anonymous]

You Minnesotains which feel you live in the midwest can have it! I live in the Minnesota which is in the North Central states.

[Anonymous]

By the way, I was stationed in Enid, Ok while in the Air Force and really liked "THE ROCK" color scheme on the RI at that time. I wouldn't mind seeing a diesel in that color scheme on the East BFE & Western, but have not seen one in N Scale as yet. Note: My home town is 62 miles straight north of Enid, a small town called Anthony, Kansas. We had four railroads there when I was a kid, The Mopac, The Chicago, northwest and Orient, The Santa Fe, and the Rock Island had an engine or two go through as well (trackage rights on the MoPac?) Sadly, there are no longer any track s left in my little town, the rails have been torn up, I remember watching the steam locomotives working the wheat harvest right behind my house when I was in 7th grade> The next year they dieselised the road. Another sad day in my life. (I'm an old codger)
Dave

[Anonymous]

I have a generic layout that has grain elevators like my home in Kansas, but my roster is really weird. I run Southern (they're pretty), The Blue Comet, (looks neat), The Blue Goose, (Looks unusual), UP Portland Rose, (love those Challengers), Another Challenger Rio Grand, Love those Challengers, (again), Burlington Northern Passenger pulled by E-& A-B (My wife's train, Green is her favorite color) My only justification for all this is that my road, The East BFE and Western, Runs an awful lot of excursion trips with steam and early diesels, from every road imaginable! HAHA! As you can see, I'm not exactly a "rivet counter", But as they say, Whatever floats your boat, (or toots your whistle.
Dave

[scole100]

I grew up in North and South Dakota. In SD the town I lived in was called the Hub City because it was where 4 railroads crossed each other on the plain. The town's in ND are all about 100 miles from each other because towns formed where the railroad need to refuel. The town I live in now, has it's main street named after former NP president Henry Villard. I model midwestern railroads because out on the plains railroads where the reasons towns were located where they were. As a result railroads are still very prominent and positively represented.

[Anonymous]

There's a eastern midwest, a northern midwest, and a southern midwest, I guess. I'm from Minnesota, too, but I used to live in eastern Kansas, so that's what I'm trying to model. Basically, anything that ran to the Kansas City area is fair game. Unfortunately, that doesn't really help me narrow down at all--CB&Q, Rock Island, Milwaukee Road, ATS&F, UP, Frisco are all represented on my layout. I could add Wabash, KCS, MKT, MP if I wanted to or could afford it!

I have an issue of MR from April '95, and there's a layout by Duane Gaddis featured--The Northern Illinois-Southern Indiana RR. He has a generic Midwest look, and he changes roadnames and eras every few months. He runs ATS&F, C&NW, CB&Q, MR, RI, IC and NYC.

Gary

[Big_Boy_4005]

QUOTE: Originally posted by cjm89

The Midwest is Indiana, Ohio, Michigan, Illinois, Missouri, Iowa, Minnesota, and some people also include the Dakotas, Oklahoma, and Nebraska. Basically it's the states wher a lot of grain is produced. Sometimes Indiana and Ohio are considered eastern states.

Yes, that is really a matter of perspective. Being from Minnesota, I would say no to Ohio, maybe to Oklahoma, Arkansas, Michigan and Indiana. My list would be: IL, WI, MN, ND, SD, IA, MO, NE, and KS. Now what was the question??? Oh yeah.[:p]

I have a very large trainroom, and plan to model mostly the BNSF and CP with a little UP thrown in. The railroad will follow the route of the Amtralk Empire builder as it passes through the Twin Cities.

[Anonymous]

The Midwest is Indiana, Ohio, Michigan, Illinois, Missouri, Iowa, Minnesota, and some people also include the Dakotas, Oklahoma, and Nebraska. Basically it's the states wher a lot of grain is produced. Sometimes Indiana and Ohio are considered eastern states.

[Anonymous]

I have to admit, I really don't know where the midwest is considered to be! I think it is thought to be Michigan, Ohio and the Indiana area, which to me doesn't make any sense as these states are to the east of the center of the country. I model the Northern Pacific, specifically in western Montana, around Butte.