dehusman wrote: While you can get away with smaller radii, I would suggest not doing it. Remeber 75% of today's mainlines were laid in the 1800's so the prototype curves are just as sharp then as they are today. I would keep the grades to the minimum since the small steamers won't haul much uphill.
I used all 18" curves on my 4 x 8 layout, but if I hadn't I'd not had much of a layout. My current layout has more room so I went with a 22" minimum on the main and 18" in industrial sidings. The point is though if you need to make a tight turn, you can do it and stay on the track.
He's right about the grade. I had two 3% plus grades and my engines didn't like them one bit. Now I stay under 2%.
Chip
Building the Rock Ridge Railroad with the slowest construction crew west of the Pecos.
JBB wrote: Space Mouse nailed it, one of the great advantages of old time modeling is that you can get by with much tighter curvers, sharper turnouts and shorter sidings and trains.
While you can get away with smaller radii, I would suggest not doing it. Remeber 75% of today's mainlines were laid in the 1800's so the prototype curves are just as sharp then as they are today. I would keep the grades to the minimum since the small steamers won't haul much uphill.
There are a few engines, you'll want 4-4-0's and 2-6-0's and some 2-8-0's, all of which are available in N.
Virtually all of the boxcars are double sheathed cars so they are easy to scratch build. The only real issue with the cars is that virtually ALL of the cars are truss rod underframes. Scratchbuilding the truss rods could be a bit tricky. You could use needles as the queen posts and fine fishline or magnet wire for the truss rods. Put a dab of epoxy or superglue on the truss rod for a turnbuckle. Evergreen makes N scale car siding scribed siding. Gondolas would all be pretty easy, since they are virtually all wood sidied with wood stakes. There would be virtually no metal cars at all.
I model 1900-1905 in HO. Check out the Early Rail Yahoo group.
Dave H.
Dave H. Painted side goes up. My website : wnbranch.com
I forgot a couple of links.....
These folks have some great buildings with false fronts and such. Also, a few of their depot's would work well.
http://www.laserkit.com/laserkit.htm
Same for these folks.......
http://www.blairline.com/
You will also find a few things here......
http://www.jvmodels.biz/
And we can't forget about these boys.......
http://www.nesm.com/
And these guys have some great stuff like a terrific bark and a windmill among other items.....
http://www.showcaseminiatures.com/
And last, but certainly not least, something you're going to need plenty of......barbed wire!
http://www.yesteryearcreations.com/
OK, here's some more links to N scale stuff that might be a help.
http://www.isp.on.ca/Sylvan/n-scaleproducts.htm
http://www.athearn.com/Products/N/Default.aspx
http://www.foxvalleymodels.com/nscale.html
http://www.aspenmodel.com/
http://www.micro-trains.com/trucks_n.php (Archbar trucks)
http://www.republiclocomotiveworks.com/ (This is an Nn3 site, but the structures would work)
http://www.blackbearcc.com/n_kits.htm
http://www.mpp-models.com/
http://www.handlaidtrack.com/n.php
http://clevermodels.com/
http://www.pinetreemodels.com/
http://www.taskboard.com/index.html
http://www.modeltechstudios.com/page1.ihtml
http://www.nscalesupply.com/ATL/ATL-TrackCode55.html (A link to some Atlas code 55 track)
And just to prove it could be done, a DCC decoder in an N scale Bachmann 4-4-0!
http://www.trainbuddy.com/Reference/Decoding%20Engines/N440.htm
Now understand, my focus is on New England, so I'm sure there's more stuff out there for western based layouts.
Bachmann's Old Timers series might be a good start for raw materials as far as rolling stock. That stuff is cheap at hobby shows and on Ebay. You could swap out the trucks for micro Trains trucks, clean up the moldings and repaint quite easily without busting the budget. They had bobber cabeese, passenger cars (combines & coaches), and some freight cars too.
The Athearn stuff from that time period is much better quality and has a larger assortment, though the Bmann line still has some unique items.
You could also maybe backdate a Model Power 4-4-0 or 2-6-0 if you wanted.
There are plenty of choices in N scale!
Space Mouse nailed it, one of the great advantages of old time modeling is that you can get by with much tighter curvers, sharper turnouts and shorter sidings and trains.
Unless you're really up for building a lot of your rolling stock, I would suggest you consider HO over N. There's simply a lot more that's is and has been available. You can get by pretty well with 4-4-0's for motive power. In HO, the Bachman Golden Spike 4-40s can be worked over to run well and look right. If you are willing to do some hunting at swap meets and ebay you can come up with some great kits for this era: Central Valley, Red Ball, Binkley, ang High Ballers are names to look for, but there are many others.
As far as RTR equipment goes Mantua (Tyco) made some Civil War period cars as well as a few others such as their bobber caboose and Dovers Caboose that can be worked over for your period. AHM made some nice freight and passenger cars that are easily available and right for this era. The present day IHC old time cars are also a good option.
To put the frosting on the cake, the old HighBaller/Alexander working link and pin couplers are back in production and listed in the Walthers catalog (Admittedly oversized, but not too much more than the standard #5 Kadees)
You'll find the Europeans have made a lot of neat buildings and equipment for this period. They've been fascinated with the Wild West ever since Buffalo Bill took the Wild West show on tour over there.
Regardless of scale, for more ideas run down a copy of John White's book, The American Railroad Freight Car. (your local libray can get it thru inter library loan). Lots and lots of great old photos of both cars and locomotives. It will give you a crash course on what was used when, and what it looked like. Many wonderful modeling ideas there.
Personaly I've been modeling old time railroading since the 60's., both in HO and O. My main interest is the development of motive power and rolling stock, so I've got stuff from the 1830s thru the late 19"teens". It's a fascinating era to work with.
Hope this helps
JBB
First off, an Optivisor is your friend!
Second, there are lots of different codes of rail in N scale. There's code 80, code 70, code 65, code 55, and code 40 for the most popular ones. Code 40 is pretty much a Micro Engineering thing, nd it's mostly hand spiked at that. Several manufacturers make code 55, like Peco, Atlas, and Micro Engineering to name a few. Atlas just announced the code 65 track line, though I'm not sure if it's hit the shelves yet. Code 70 is made by Shinohara (Walthers now I think), and again, Micro Engineering. Code 80 is made by Atlas, Peco, and many others.
Personally, I chose to go with code 55 as it looks pretty good and it's readily available at a decent price.
The biggest thing with N scale track is to make sure your trackwork is smooth. N scale engines don't have the weight to tolerate poor or even mediocre trackwork. Save yourself lots of headaches and do it right the first time. It'll take a bit longer, but it's worth it!
Next, I would say that you shouldn't put more tracks in a given area just because N is smaller. Use the same HO track plan but make adjustments for track centers and such. If you do that you'll have more room for scenery and your curves will be boader. Your layout will operate better and look way better. It will loose that "bowl of spagetti" look that can plague an HO layout on a 4x8.
And hey, one last thing.....don't stop asking questions. The only stupid question is the one you didn't ask!
It's not the only reason I model the 1880's but one advantage of the small steam and cars is that you can use tight turns and sharp turnouts. I have no problems with 15" turns and #4 turnouts with anything made for 1880's. That means you can do a lot that the later layouts cannot, even in HO. So if N scale is too small, you can still do a lot more in HO and still look good.
N scale comes in at least code 70, 55 and 40. There may be others I'm not aware of. Although it may look better in a prototypical sense to go with the smallest rail out there, no one will come to your house and shoot you if you go with one of the heavier, more common and cheaper tracks.
In fact, very few people will notice anything other than the cool trains and buildings.
davidmbedard wrote: The difficult part of this project for N scale is the track. Everything available is about 3 times too big for that era. But if you could lay, say, code 30 rail, then you should be good.David B
The difficult part of this project for N scale is the track. Everything available is about 3 times too big for that era. But if you could lay, say, code 30 rail, then you should be good.
David B
Micro Engineering has code 40 rail. That would be close enough I'd think.
There's a few of us. Check out the following post, stop in and say howdy.
The Pre-Big One Modeler's Musket and Sabre Club
Hello, I was wondering if anyone models in the 1880's? I would like to build an N scale in that time frame, complete with general store, saloon, sheriff office, horses, and so on.
I would like to run some passenger cars as well as others, What other cars were used back then? Maybe some stock casr and what elece? Thanks, Mike