Originally posted by Railroading_Brit A Bachmann "Jubilee" class 4-6-0 in LMS lined black livery - not American I know, but it's very nice! On a related subject, has anyone else had trouble with out of gauge wheelsets on Bachmann locos? All of the Bachmann split-frame chassis locos I have had major running problems (wouldn't pull, lumpy running) that disappeared when I sorted out the wheelset gauges. I'm wondering if this is a problem with their US-outline range as wel/quote] I recently bought a Bachmann GP30 at a swap meet and omitted to test it at the time. It doesn't run lumpy but has a horrible fibration at one end which I find almost as iritating. I tried every possible solution in the book, cleaning and lubricating the gears, checking the gauge and free movement of the trucks, checking the balance of the motor, even moving the front truck to the back and vice versa and last but not least inspecting the coupling btween motor en trucks. I suspect the last is the source of the fibration but I have no way to confirm that. I have two other Bachmann loco's and these perform as they should. Happy and healthy newyear to you all. Reply Nieuweboer Member sinceApril 2001 From: Netherlands 226 posts Posted by Nieuweboer on Thursday, January 1, 2004 6:56 AM QUOTE: Originally posted by Railroading_Brit A Bachmann "Jubilee" class 4-6-0 in LMS lined black livery - not American I know, but it's very nice! On a related subject, has anyone else had trouble with out of gauge wheelsets on Bachmann locos? All of the Bachmann split-frame chassis locos I have had major running problems (wouldn't pull, lumpy running) that disappeared when I sorted out the wheelset gauges. I'm wondering if this is a problem with their US-outline range as well? Reply Morpar Member sinceApril 2002 From: Frankfort, Indiana 424 posts Posted by Morpar on Wednesday, December 31, 2003 4:58 PM So much for the Riv Allegheny! I just hooked on to a Bowser Challenger, unassembled with Rivarossi tender, a used GG-1, and 2 FA-1 shells. And all I was stopping for was a couple of sheets of styrene! Good Luck, Morpar Reply Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Wednesday, December 31, 2003 3:34 PM A P2K CP Rail GP9. Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Wednesday, December 31, 2003 2:43 PM Sratch that 0-6-0. I just got a Spectrum Light 4-8-2 Mountain. Sure is a fine model. Beautifuly deatailed and it runs great. Reply Edit rockisland4309 Member sinceOctober 2003 From: Phoenix 128 posts Posted by rockisland4309 on Wednesday, December 31, 2003 11:56 AM I have six Atlas U30C's on order in the Rock Island. I can't wait to get them!! Reply nfmisso Member sinceDecember 2001 From: San Jose, California 3,154 posts Posted by nfmisso on Tuesday, December 30, 2003 3:43 PM HO scale Spectrum USRA 2-6-6-2, which will be turned into a N&W Z1a or Z1b, I am leaning towards number 1420. Nigel N&W in HO scale, 1950 - 1955 (..and some a bit newer too) Now in San Jose, California Reply Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Tuesday, December 30, 2003 2:04 PM The Kato Santa Fe RDC set Reply Edit ClinchValleySD40 Member sinceJune 2001 From: Holly, MI 1,269 posts Posted by ClinchValleySD40 on Tuesday, December 30, 2003 1:28 PM A bunch of Atlas SD35's. Can't wait to get the U30C's I have on order. Larry http://www.youtube.com/user/ClinchValleySD40 http://www.flickr.com/photos/52481330@N05/ http://www.trainboard.com/railimages/showgallery.php/cat/500/page/1/ppuser/8745/sl/c Reply bluepuma Member sinceJanuary 2001 From: US 224 posts Posted by bluepuma on Tuesday, December 30, 2003 12:47 PM mmmm... N Scale FA2/FB2 in NYC (LL) then before F59PHI set of 2 (A/A) in Amtrak West, then before, (Kato) BNSF SD70 A/A with nose headlights. Funny, the FA/FB set reaches down into primal memory of the Alco vent fan from my childhood FA O27. Reply dave9999 Member sinceJune 2003 From: Along the Murphy Branch 1,410 posts Posted by dave9999 on Monday, December 29, 2003 5:41 PM Rivarossi 2-6-6-6 Allegheny. Dave GO GATORS !! Old layout http://photobucket.com/albums/v491/davegator/ New layout http://smg.photobucket.com/albums/v491/davegator/New%20Layout%20Building/ Reply rf16a Member sinceMarch 2002 From: USA 165 posts Posted by rf16a on Monday, December 29, 2003 5:16 PM My latest locomotive is an Athearn "Ready to Roll" Conrail SD-50 that I bought a few weeks ago. Prior to that, this past summer I bought 3 Proto 2000 GP-9s, 2 PRR and 1 undec. Reply Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 5:05 PM The last one i bought about two yrs ago was a N Scale SD50 Rio Grande[:)] i hope to aquire two SD70's BN Executive Scheme that is if i can find them at reasonable price Larry Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 4:22 PM QUOTE: Originally posted by Morpar Waiting for Rivarossi UP FEF-3 in two-tone gray! Should get it from the UPS man tomorrow aftrenoon! Last before that was the Bowser 4-8-4 kit. Next on the list is the Rivarossi 2-6+6-6, that will take some saving up for though... I got the FEF-3 for Christmas this year, As I commented before it's quite the Ferrari, needs good track and has plenty of speed. Unfortunately the passenger cars (10) in tow can't keep up and are now in the shops for upgrades. The Alegheny is well worth the wait. That was last years Christmas gift. Both are excellent pullers. The Allegheny has pulled a 96 car consist up considerable grades without much effort. From what Iv'e seen so far, the FEF-3 should be comparable. A double header of the two is in the offing. Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 3:59 PM A Bachmann "Jubilee" class 4-6-0 in LMS lined black livery - not American I know, but it's very nice! On a related subject, has anyone else had trouble with out of gauge wheelsets on Bachmann locos? All of the Bachmann split-frame chassis locos I have had major running problems (wouldn't pull, lumpy running) that disappeared when I sorted out the wheelset gauges. I'm wondering if this is a problem with their US-outline range as well? Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 3:56 PM The last ones I bought were actually for my dad. EMD F7 ABA set in NP freight livery. The A units has a gyralite in it and he loves it so much he wants them retrofitted to all his other F units....I weathered them fairly heavily as well so now he wants all his freight engines weathered too.......oh well....lol. Like I don't already have a hundred projects ;) As for me, I've decided to stop buying any new locos and rolling stock until I finish all my painting, weathering, and detailing projects on the locos/stock I have. So, that could be a few dozen years :P Warren Reply Edit AltonFan Member sinceApril 2003 From: US 1,522 posts Posted by AltonFan on Monday, December 29, 2003 3:47 PM A used Bachmann N scale N&W J 4-8-4. The price was right. Dan Reply dharmon Member sinceAugust 2003 From: Bottom Left Corner, USA 3,420 posts Posted by dharmon on Monday, December 29, 2003 12:19 PM QUOTE: Originally posted by Roadtrp My latest (and it is also my first) locomotive is a Life Like Amtrak F-40. I know Life Like doesn't have a great reputation with some folks here, but I didn't want to spend a fortune on equipment when I was first starting out. Although I have nothing to compare it against, I am very happy with it. It is quite heavy, sticks to the track well and pulls very smoothly even at extremely low speed. [:)] The shell on the LifeLike F40 isn't really too bad. I have one in a box somewhere. There was an article years back...and I can't remember if it was MR or RMC that addressed using an Atlas FP7 chassis to repower it, but you could use others. Later on, if you decide to upgrade the insides, scour the swap meets for a suitable frame and motor and keep the shell. I personally enjoy rebuilding/remotoring and returning to service some of the older stuff I have. The important thing is that you're happy with it.[:)] My latest purchase...an Athearn F59PHI sitting in the repaint and detail que.....my latest to hit the rails is a repowered/repainted 20+ year old pair of Athearn F7As with an Athearn FP45 to Ex-BNSF SDF40-2 conversion next once the final details and remotor gets done. Latest in my world doesn't usually mean new, even the F59 was second hand. I haven't bought a NEW loco in 2 years. Reply PistolPete Member sinceDecember 2002 From: US 219 posts Posted by PistolPete on Monday, December 29, 2003 11:53 AM [:D] Athearn UP, GP38-2, Happy New Year "Model Railroading is a great pastime, BUT SOCCER IS A WAY OF LIFE" Enjoy Life Pistol Pete Reply orsonroy Member sinceMarch 2002 From: Elgin, IL 3,677 posts Posted by orsonroy on Monday, December 29, 2003 9:05 AM My latest engine purchase was six of the new Life Like P2K NKP Berkshires. These engines are light years ahead of the old Rivarossi engines in every way possible! I've also got one of the BLI USRA heavy 2-8-2's in the mail (in NKP paint, of course!) Ray Breyer Modeling the NKP's Peoria Division, circa 1943 Reply Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 9:04 AM QUOTE: Originally posted by Johnnydash9 ...my comeback was...why the heck would i pay $700 for a peice of plastic that will depriciate when i could pay that much or maybe a little more for one in brass that will be worth soemthing more someday. So im curious as to what you paid...if i could get one for $450 that would be better...but not for what they are asking. If you are doing much "scoping" at a hobby shop, you might need to learn the difference between diecast metal [ which the Lionel superstructure is ], and plastic, [which is what a Rivarossi superstructure is].[:p] I wouldn't pay $700 for the Lionel engine either, but...WHERE did you get your brass pricing from ? Twenty or twenty-five years ago ?[:0] I usually don't respond to posts that feature terrible spelling errors, but when they state outright falsehoods, and are misleading in content, I sometimes make an exception. Happy New Year anyway.... Mike[:D] Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 8:43 AM The latest one I got was an old Rivarossi 2-8-0 from the 50's that's actually a model of an Italian engine that's had a few parts added on to it to make it look American (it was manufacturered that way). It's an interesting conversation piece. It won't be my latest engine for long, though, because I buy a lot of stuff from ebay and usually have something coming in the mail most weeks. Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 8:34 AM My first was a battery operated 027 steam engine. The latest are a Proto 2000 Amtrak E8 A-B. RMax Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 6:46 AM A Stewart VO1000 Reply Edit lupo Member sinceNovember 2003 From: the Netherlands 1,883 posts Posted by lupo on Monday, December 29, 2003 6:26 AM Athearn Genesis UP FA3 #1410 L [censored] O Reply Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 3:38 AM Got these for Christmas----Athearn U.P. SD70M #4357 and Athearn SD50 U.P. #5043 Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 1:52 AM Mine was a gp38 ph 2 union pacific by athearn. Reply Edit Anonymous Member sinceApril 2003 305,205 posts Posted by Anonymous on Monday, December 29, 2003 1:50 AM a couple of very old steam loco's w tenders (1) 2 4 2 , (2) 0 6 0-both appear to have been cast many yrs ago in japan. rewired. cleaned,repainted, greased-they run well. made by New One Model, could not find them anywhere on the net--so i really do not know how old they are. Yet they are old, Has anyone heard of this manufacturer? Reply Edit Roadtrp Member sinceNovember 2003 760 posts Posted by Roadtrp on Sunday, December 28, 2003 10:39 PM My latest (and it is also my first) locomotive is a Life Like Amtrak F-40. I know Life Like doesn't have a great reputation with some folks here, but I didn't want to spend a fortune on equipment when I was first starting out. Although I have nothing to compare it against, I am very happy with it. It is quite heavy, sticks to the track well and pulls very smoothly even at extremely low speed. [:)] -Jerry Reply 12 Subscriber & Member Login Login, or register today to interact in our online community, comment on articles, receive our newsletter, manage your account online and more! Login Register Users Online Jackflash see all » Search the Community ADVERTISEMENT ADVERTISEMENT ADVERTISEMENT Model Railroader Newsletter See all Sign up for our FREE e-newsletter and get model railroad news in your inbox! Sign up
QUOTE: Originally posted by Railroading_Brit A Bachmann "Jubilee" class 4-6-0 in LMS lined black livery - not American I know, but it's very nice! On a related subject, has anyone else had trouble with out of gauge wheelsets on Bachmann locos? All of the Bachmann split-frame chassis locos I have had major running problems (wouldn't pull, lumpy running) that disappeared when I sorted out the wheelset gauges. I'm wondering if this is a problem with their US-outline range as well?
Good Luck, Morpar
Larry
http://www.youtube.com/user/ClinchValleySD40
http://www.flickr.com/photos/52481330@N05/
http://www.trainboard.com/railimages/showgallery.php/cat/500/page/1/ppuser/8745/sl/c
QUOTE: Originally posted by Morpar Waiting for Rivarossi UP FEF-3 in two-tone gray! Should get it from the UPS man tomorrow aftrenoon! Last before that was the Bowser 4-8-4 kit. Next on the list is the Rivarossi 2-6+6-6, that will take some saving up for though...
Dan
QUOTE: Originally posted by Roadtrp My latest (and it is also my first) locomotive is a Life Like Amtrak F-40. I know Life Like doesn't have a great reputation with some folks here, but I didn't want to spend a fortune on equipment when I was first starting out. Although I have nothing to compare it against, I am very happy with it. It is quite heavy, sticks to the track well and pulls very smoothly even at extremely low speed. [:)]
Ray Breyer
Modeling the NKP's Peoria Division, circa 1943
QUOTE: Originally posted by Johnnydash9 ...my comeback was...why the heck would i pay $700 for a peice of plastic that will depriciate when i could pay that much or maybe a little more for one in brass that will be worth soemthing more someday. So im curious as to what you paid...if i could get one for $450 that would be better...but not for what they are asking.