Small wire ring connectors

[Dunderhead]

Thanks for your help Mel. Much appreciated!

[Dunderhead]

Thanks for your help Ed!

[RR_Mel]

If what you are looking for is a #2 hole ground lug here is where I buy mine.

eBay search:

2.2mm Ground Lug Terminal

That comes back with this

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=2.2mm+ground+lug+terminal&_sacat=0&LH_TitleDesc=0&rt=nc&_odkw=2.2mm+ground+lug&_osacat=0&LH_PrefLoc=1

First hit is this one

https://www.ebay.com/itm/324934297376?_trkparms=ispr%3D1&hash=item4ba797e720:g:9C0AAOSwnSJhtDNv&amdata=enc%3AAQAGAAAA8OdV0jQndtBhEe0QbAXYwxL0GvOjphKNWB1zNNte%2B2a9qA6Ui7PAb9HuHr4xUTt5tNrTzq0hAdDT4uFW6pBWQByd46Ubb5%2BtEiSQTbZU8%2B8Pna1wsNWwxedgtODvifJ6Da0Nn%2FJJUoljIoHp33CfCaJNQZfWKvaR6d1pkr2o2%2Fmlx1tdDrJJWjR6Agr%2BdwPx8uvWOOLSc8DAQ1T7rnaUyHUZn%2FY%2FfxvNcfsdcEF3HZxd8hgGa3T3aPSK9zyR0AjTbLjo5XM6idXpu4AisJXyeP0WT2DC4%2BThbOlFPIpc7XF4DgUD3ylTBNcn6BspzlcY0g%3D%3D%7Ctkp%3ABFBMgp69ipJg

I’ve been using these lugs for connecting wires to the frames of my locomotives for as long as I can remember.  They are the correct size for either #2-56 or M2 screw.

 

Mel


 
My Model Railroad   
http://melvineperry.blogspot.com/
 
Bakersfield, California

Growing old is a bummer, aging is definitely not for wimps.

[zstripe]

maxman

Or did I just waste my time trying to help out?

I gave up, roughly a year ago.........

Take Care! 

[zstripe]

woodone

Did you do a search for MPJA?  Heck just go to your local auto parts store and look for electrical connections.  are we leading a hourse to water and you will not drink?

 

DuH?????

Take Care All!

Frank

 

[woodone]

Did you do a search for MPJA?  Heck just go to your local auto parts store and look for electrical connections.  are we leading a hourse to water and you will not drink?

[maxman]

richhotrain

 

 

maxman

Good grief.  Did anyone look at the Streamlined Backshop link I posted?

Or did I just waste my time trying to help out? 

 

 

 

You posted?  

 

It looks like they are out of stock.

Rich

 

Well, that’s a ring of a different terminal.  Could always call and see availability, or maybe get suggestion for alternate source.

[richhotrain]

maxman

Good grief.  Did anyone look at the Streamlined Backshop link I posted?

Or did I just waste my time trying to help out? 

You posted?  

It looks like they are out of stock.

Rich

[maxman]

Good grief.  Did anyone look at the Streamlined Backshop link I posted?

Or did I just waste my time trying to help out?

[richhotrain]

Dunderhead

I typed  ring terminals and everything I got was too large 

A 2-56 screw is a #2 stud size. Here is a link to Amazon. Unfortunately, you need to buy a 100-pack.  If you need far less, just search for "ring terminal for a #2 stud".

https://www.amazon.com/22-18-Ga-Ring-Terminals-Stud/dp/B00NV6OYRA

Rich

[gmpullman]

Dunderhead

I don't know what MPJA is

I didn't either... but Google did:

https://www.mpja.com/

Regards, Ed

[Dunderhead]

I typed  ring terminals and everything I got was too large

[Dunderhead]

I don't know what MPJA is

[wrench567]

 I sat down at the workbench one day with Dremel handy, some drill bits, and a thin sheet of brass strip and turned out about a dozen or more in a half hour. The brass was thin enough to cut with an old pair of scissors. It was quite a few years ago and I still have a bunch left.

    Pete.

[zstripe]

Dunderhead

Not this time!

 

You mean You have no Menards'/Home Depot or any other home center near You???? All You have to do is ask or look for ring terminals, solder or crimp. If You type in ring terminals on Your PC search engine I'll bet You get all kinds of hits and locations. It is not an uncommon item.You can even type in ring terminals on Amazon and fall off Your chair from all the MFGER'S of said item.

Good Luck!

Frank

[maxman]

Dunderhead

I am looking for wire ring connectors that will fit on a #2-56 screw and, so far, having no luck. Can anyone help?

 

Streamlined Backshop

https://store.sbs4dcc.com/search.aspx?find=ring+terminal

 

[woodone]

Try MPJA 

[Dunderhead]

Not this time!

[ndbprr]

E bay has just about anything made.  I would look for a USA supplier

[gmpullman]

These?

https://tinyurl.com/34tydb7w

There was a thread on this about eight weeks ago but I'll be dipped in shellac if I can find it...

 

Good Luck, Ed

[Dunderhead]

I am looking for wire ring connectors that will fit on a #2-56 screw and, so far, having no luck. Can anyone help?