I've used this with good results:
https://tinyurl.com/5dwb73ab
A friend gave me some Kester liquid flux which may be the same as this:
https://tinyurl.com/skuvphj8
I use it occasionally but prefer the paste more often.
For etched brass structural assembly I use TIX solder and their liquid flux:
https://tinyurl.com/ytfv762v
Good Luck, Ed
What is the paste going to be used for. There are several pastes that are used to solder surface mount components onto PC boards.
Solder paste is pulverized solder alloy in paste flux.
What you want is a eutectic solder composition with relatively fine grain size in flux with no-clean composition. I'll look at some of my references for recommendations later.
Paste. Not flux
shane
A pessimist sees a dark tunnel
An optimist sees the light at the end of the tunnel
A realist sees a frieght train
An engineer sees three idiots standing on the tracks stairing blankly in space
Solder paste or solder flux? There is a difference.
Tom
https://tstage9.wixsite.com/nyc-modeling
Time...It marches on...without ever turning around to see if anyone is even keeping in step.
What is a good paste? Not sure which is good for general use from dcc boards to brass. To many initials in the descriptions . Figure inshould ask. What to look for .
Shane