I lost my cheat sheet i made for 8 pin decoders and what each pin is for. The directions i have gave me enough to find the forward, reverse and common for lights. Need the other 5 pins and which one a strobe goes to. And which goes to ditch lights The specific decoder in question is a NCE D14SR
i asked instead of looking it up cause others might find this usefull
Shane
A pessimist sees a dark tunnel
An optimist sees the light at the end of the tunnel
A realist sees a frieght train
An engineer sees three idiots standing on the tracks stairing blankly in space
Scroll down to find the pdf for your decoder. Joe
https://ncedcc.zendesk.com/hc/en-us/articles/201756029-Retired-Decoder-Manuals
You won't find that output in the 8 pin connector. The 8 pin plug was designed to only support 2 total function outputs - headlight and backup light. The connection points on the D14SR are shown on the instruction sheet linked above - you need to solder wires to the decoder.
--Randy
]
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.