Can’t seem to be able to find a 11 mm can motor for a small HO brass mogul. Only source I could find until Jul 1 was NWSL. Any ideas?
Ebay?
I found this place which has several types of motors available
http://roundbell.com/MashimaCanMotors.html
--Randy
Modeling the Reading Railroad in the 1950's
Visit my web site at www.readingeastpenn.com for construction updates, DCC Info, and more.
Or you can try this one (ebay):
https://www.ebay.de/itm/Two-shaft-Coreless-micro-motor-12V-8mm-x-16mm-Worldwide-exclusive-product/283264202464?hash=item41f3dcb6e0:g:Zl4AAOSwBfhb74Cv
It is 8 mm coreless motor, I have two installed in European 2 axle HO switchers, it works great. I was a little suspicious considering the small diameter, but this motor is surprisingly strong. It works practically without any sound. On DCC, it works great with ESU or ZIMO decoders (probably others too, I tested these two). Btw, seller gives 3 years warranty on this motor.
There is another European seller for either coreless or iron core motors:
Coreless (10 and 16 mm):
https://www.fischer-modell.de/zubehoer/elektronik/motoren/
Iron core (Mashima):
https://www.fischer-modell.de/zubehoer/elektronik/mashima/
I have not tested any of coreless motors from this seller. It seems there is 10 mm Mashima motor available:
https://www.fischer-modell.de/mashima-motor-mhk-1024d-10?c=182
Hrvoje
There is also Micro-Mark tools that offers some.
Thanks for the info. Now I gotta figure out the foreign language web site. Probably just ask my granddaughter. Looks like a good price. Guess it depends on the shipping.
I ordered from the first one listed. Looks like a good deal. Thanks.